KES 30-Inch Shower Slide Bar with Adjustable Handheld Shower Head Holder, Reuse Existing Holes, SUS304 Brushed Stainless Steel Wall Mount for Bathroom, Drilling Required, F209S78-BS

This was a nice shower slide. It's reasonably strong and I mounted it directly into the 2 X 4 studs behind the shower tile, so it feels very solid. The slide works well and it holds the handheld shower head perfectly.

Easy to install in place of another bar as the mounting brackets are adjustable. Quality seems fine, we’ll see how it wears.

Easy to install, looks great. When measuring add an 2 inches from your drill holes on both sides for the bar to slide through the hardware. Very happy with it.

KES showerhead: adjustment of the showerhead is not quite as easy as the one being replaced. The quality of the product is as expected - very good. Shark filters: fit is good; durability is yet to be determined

The KES 30-inch Shower Slide Bar is a nice shower slide bar that can actually be used with pre-existing holes a bit further apart than 30 inches. It's inexpensive but seems reasonably sturdy with the biggest compromise being that the bar itself is two separate pieces that thread together, presumably so that a much shorter box can be used. The included shower head holder is pretty good. It is made of plastic but has a decently sized opening for the shower head and worked with ours ok. I have tried others where this opening was much too small.

Installed easily and hardware fit perfectly

Nice replacement slide bar, solid metal bar and good mounting hardware. I was able to use the old holes in the ceramic tiles on my shower to retrofit this new bar. The adjustment for the actual shower head holder is metal covered plastic, and it has a tightening handle for adjusting the location up and down. Good value for money. The 2 mounting attachment points can be moved up or down on the bar to fit into a previous installation. Unsure if the screws included are stainless so I replaced 4 screws with stainless ones to insure they didn't rust out.

Beautiful

Jag gillade den här. Bra kvalitet. Härligt att man är nöjd när man köper osett från internet :-)

De stang is in twee delen, maar dat zie je bij de geborstelde variant niet. Wandhouders zijn van metaal en voelen zeer stevig. De douchekophouder is wel wat lichter en voelt iets minder stevig dan de rest, maar nog steeds ruim voldoende. Over de levensduur en roestbestendigheid kan ik nu nog niets zeggen, maar ik ben zeer tevreden over deze aankoop.

This is a very high quality product. I'm a motor sport engineer and I was very impressed with the fit, finish and sturdy design. Faultless. So easy to install in the original holes in the tiles. Elegant, simple and beautifully chromed. The rail and wall brackets are quite heavy, made of good quality metal. The shower head holder is plastic, but very sturdy with a metal handle for adjustment. The shower head fits in very solidly in the tapered hole. It comes with spare screws and everything you need to install in the original place. I'm not easily impressed but this is genuinely very, very good. It makes the original Mira one look like what it was, cheap plastic rubbish. Buy it. You will not be disappointed.

I love everything about the KES Shower Riser Rail Stainless Steel! The quality is exceptional, and it has a solid weight to it that feels very strong and durable. From the moment I unpacked it, I could tell it was a well-made product. I opted for the brushed metal finish, and it’s beautiful. The packaging was excellent, with everything well protected to prevent scratches, and the fittings were secured in bags. Installation was a breeze. We already had some holes in the wall from a previous rail, but all you need are two holes, and it provides a super strong hold. The position of the brackets was perfect but can easily be adjusted if needed. The slider bar comes in two sections that screw tightly together to create the full length, making installation even easier. The shower head holder, although made of plastic, is of excellent quality. It’s easily adjustable by sliding it up and down the bar and twisting the end to lock it into position, making it ideal for a family of different heights. It’s also easy to tilt the holder with the shower head on it to get that perfect position. The versatility of the holder means everyone in the family can adjust it to their preference, and it locks securely in place. In the past, I’ve had many shower rails, all of which were cheap and flimsy. This is the first one made from metal and of outstanding quality. For the price, it’s incredible value, and the brushed finish adds a touch of elegance to our bathroom. The product arrived quickly and was well-packaged, which shows the attention to detail the company has for its customers. The customer service was also top-notch, responding promptly to a query I had about installation. After a few months of use, there are no signs of wear or rust, which I have had problems with in other products. The rail still looks as new as the day I installed it. It holds the shower head firmly in place, even with the water pressure on full blast. It’s clear that this product is built to last and withstand daily use. I highly recommend this shower riser rail. You won’t be disappointed. I will most likely buy a couple more for the other walls, as you can never have too much storage in the shower. If you’re looking for a durable, stylish, and practical solution for your shower, look no further. The KES Shower Riser Rail is worth every penny, combining function and style perfectly. Thank you for taking the time to read my review. I hope that you found it helpful and that it assists you in your decision-making. I try to be as honest and fair as possible, as those have always been the reviews that helped me the most.

Barra de acero bien hecha, los soportes son de acero también, un conjunto sólido que puesto queda muy bien. La instalación es sencilla, en las instrucciones indican de poner 2 tornillos por cada conexión, yo he puesto solo uno y es más que suficiente. La única parte que no me convence es la base móvil de la alcachofa, esa la única parte plástica y creo que se verá afectada y se romperá con el paso del tiempo, ya veremos. El resto es perfecto.