Auxbeam 9005 LED Fog Light Bulbs, 60W 12000lm 9005 HB3 Led Fog Light Bulbs LED Chips Extremely Bright 9005 LED Light Kit F-16 Series (Pack of 2)

These are very easy to install, they are very bright. I broke some clips when replacing but that’s my fault.Would recommend for a first mod.

Worked good while it lasted didnt even last 3 months. Either i had badluck and got a bad batch or they just suck like that but 1 of them went out.They reached out to me and are sending me a new set🙏 5 stars for taking care off me i really recommend them they will take care of you if any problem accurs 👍

I drive a 17 ford focus, and i noticed my bulbs were going dim (halogen), so i upgraded to halogen highest end ones available. Bright but they didnt seem bright enough. So i started checking out what was available and i found these. At first i was skeptical but wow was i wrong.(Installation recommendations for 2017 ford focus) I work as an Automotive technician, and i read on reviews your suppose to leave your dust cap off of your headlight assembly, i completely disagree with this, because how my assembly is designed it is possible to get moisture and water inside the assembly. The other bulb in the assembly high beams "h1 " connector does not have a weatherpack on it, which would allow corrosion. i ended up taking a utility knife and making a notch in the rubber dust cap, plugging them in leading the "drivers" out side the assembly.This is important because the drivers get really hot. Then i lead the wiring back into the assembly, and screwed the bulb in, put the dust cap back on and spread some Permatex black RTV silicone around the wiring on the dust cap to ensure it was still waterproof. (check second picture) flip up the assembly and hold it up and mount the lights with the driver leaning up against the support bracket, and put the screws back in. you should see the driver ontop when you open the hood. WHATEVER YOU do do not put the driver inside the assembly it will get very hot and can cause damage to the bulbs, or the assembly, i tried this and the wiring got hot. Been running the bulbs for nearly 4 months and no issues, no damage to anything so far. BRIGHT as hell, even for low beams. Light reflects off signs for miles, allows you to see wildlife, road signs, and any hazards with ease before you end up finding them with your bumper. Soon im purchasing the H1 of these for my high beams.Vehicle: 2017 ford Focus Se hatchbackPros: Very bright, great construction, includes everything you need!Cons: People think your running with your high beams on and will flash you, be prepared for this. There is in EMI interference with these, i assume from a bad ground with the fans and the driver. Be prepared not to use AM/FM radio while your led lights are on, i absolutely hate this, but however most of the times i use bluetooth so this isn't an issue.Overall opinion: This is an excellent deal, the price vs what you get is amazing. Great set of halogen bulbs costs the same as these so you cant go wrong. I highly recommend these!

Swapped out the worthless OEM bulbs on my 2016 Fiesta ST, WOW what a huge difference, should have put these in day one.I did have an issue which I think may be a common issue with a lot of installs (which is why 4 stars and not 5) nothing major they worked right away after I got them installed, no dipped bulb warning or rapid turn signals. The issue was with fitting them in there they were very difficult to fit in the housing as the bulb is quite a bit larger than a standard bulb due to the fan. I had to fight with the bulb to get it set in the bracket in the light assembly. I had to use a pair of needle nose pliers to finish twisting the bulb in to lock it in place because I couldn't get a good grip with my fingers to turn it because it was resting right against the plastic of the headlight assembly, the rubber cover also has a bulge in it now from the back of the bulb so it doesn't seat as tightly as with standard bulb we will see if condensation becomes an issue due to this. I'm also not thrilled about the resistor pack (I'm assuming that's what it is) which is about the size of a pack of trident gum, just having to be shoved in the assembly and just being left to bounce around. I'm not dogging the manufacturer due to these issues as they can't possibly anticipate issues with hundreds of different styles of headlight assemblies. Just something to be aware of if your headlight assembly is even 1mm smaller than mine these light may not fit.Overall the light output is excellent, although I may need to adjust the headlights it seems to shine on the high side I haven't had people flicking there high beams at me anymore than with the original bulbs though, so It could be the shine of the lights is so much better it may seem like they are shining high but I will ask them to check them next time I have the car serviced and adjust them if nessacery. I can't vouch for longevity as I have only had them in for a week but no issues so far and the overall build quality seem excellent.One other thing I've read a lot of reviews that say they don't work very well unless you have a projector style headlight assembly, they seem to work fine with my headlight assembly so it maybe the design of your assembly.

Excelente producto funciona muy bien y muy facil de instalar

I got this for my Dodge ram 1500 and I love it. The only thing is that this the second time I ordered because the first ones the burner out

Very bright with an excellent beam pattern for an aftermarket LED bulb. Product looks great and feels high quality. Very easy to install on my 2009 Nissan Titan. I did have to cut off a few mm of a small plastic tab on each side that would catch on the fins of the fan housing and not allow it to turn in to place. Once these tabs were cut down, they screwed right in to place and seated tightly.The only thing that gives me pause is they did flicker one time in the first few days. Have not done it since. I did install them with the anti-flicker resistors. So far I've been an incredible improvement over the stock bulbs, but they've only been on a week, so I can't speak to the longevity.

I tried several other LEDS by other companies, this one works thus far...The issue with Nissan vehicles is that when DRL functions, the DRL module flips the polarity, and regular Polarized LED bulbs won't work. These bulbs are "Non Polar " sensitive and also operate at 9 volt which is DRL function. The High beams work as expected!! Longevity I don't know yet...I spent 2 weeks of internet searching and also a day with my mechanic. No resistor is needed since they don't flicker in my Nissan

Great bulb super brightBought them for my DRL/HighBeam. They have a slight flicker during DRL operation but that is due to the lower input voltage from my car and has nothing to do with the bulbs themselves