Question 1

Are there any reviews on this product?

Accepted Answer

We purchased one last year.  Live in north Idaho.  Great product.  Harder to put together than anticipated.  Suppose to be snow bearing but we had a lot of heavy snow and there might be some panels to fix.   Panels are plastic.   It gets super hot inside.  One vent but you can also open the door to cool it down I suggest you buy the base. Extra money but worth getting it perfectly level.  I would buy it again since it's a value for the price product.

Question 2

Does this greenhouse have a guttering system that makes rainwater collection possible?

Accepted Answer

no, it does not have a gutter system

Question 3

How do you get water inside? Drill a hole in the base and push the hose through it?

Accepted Answer

Please do not drill a hole in any part of the greenhouse as it will void the warranty. The safest way to get a water hose to be permanently available in your greenhouse is to build a hose spigot that goes underneath the base and reemerges into the greenhouse.

Question 4

wire that goes over the top to keep from blowing away  How to do it?

Accepted Answer

No wire over the top received. We did receive 9 (74 inch long) braided metal cables with loops on each end, 9 pairs of 3 inch screws, and 9 metal angle 5” x 3” hooks with our 8x20 greenhouse. They are tensioning wires that go inside, left to right, with the hooks pulling each wire up towards the ceiling, in the middle (they are not plant holder wires, like we might assume, by looking at the ad pages). To install, they have you remove the inside pin from the top of the R2 bars (the bars that pitched): its the row just below the vent window panels row. I pulled an angle iron out of the wooden holder and used a pair of vice grips to hold the insertion angle iron, so it would be strong enough to pull the pins out. The cabling loop easily slips through the frame. I was able to grab/pull the loop into place over the empty pin hole, with a small screwdriver. Its a little tricky screwing the 3” screw in, getting it aligned so it passes thru the ‘pinless’  hole on the outside side of the R2 support bar - if the screw starts spinning near the end, you have missed the far side hole, so back out a bit, re-align and try again. The hard part is pushing the center of the cabling high enough (after attaching both sides) to slip the hook into place. I found it was easier to remove the ceiling bar pin that was in the way,  lift/push the hook into place, and then replace the ceiling pin. Then you need to look over the outside framing to make sure all panel framing is still locked in place. Once completed, you have quite a solid greenhouse structure.

Asin	B00M5J30D8
Best Sellers Rank	#1,005,299 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden) #1,958 in Greenhouses (Patio, Lawn & Garden)
Brand Name	Palram
Closure Type	Panel Assembly
Color	Clear
Cover Material	Polycarbonate (PC)
Customer Reviews	3.1 3.1 out of 5 stars (39) 3.1 out of 5 stars
Door Style	French Door
Frame Material	Aluminum
Global Trade Identification Number	00763552402776
Indoor Outdoor Usage	Outdoor
Item Dimensions L X W X H	103.9"L x 105.1"W x 93.5"H
Item Highlight	Large Outdoor Backyard Home Garden Walk-In DIY Kit, Twin-Wall Clear Roof, UV Protected, Heavy-Duty Resin Frame, Roof Vent
Item Type Name	Greenhouse
Item Weight	224.8 pounds
Manufacturer	Poly-Tex Inc - DROPSHIP
Manufacturer Contact Information	877-627-8476
Manufacturer Part Number	HG7208C
Model Number	HG7208C
Nominal Wall Thickness	0.15748 inches
Number Of Doors	2
Number Of Items	1
Number Of Vents	1
Size	8' x 8'
Unit Count	1 Count
Upc	763552402776

Palram - Canopia Grand Gardener 8' x 8' Resin Greenhouse, Green/Clear

Details

Details

Description

Specifications

Common Questions