Screw Pin Anchor Shackle Made of 304 stainless steel, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, glossy and bright surface, Solid design, abrasion resistant, strong load-bearing, used for coupling chain and wire rope for camping, hiking and other outdoor sports. Review: The 18mm is solid and hefty - the 18mm pin is about 0.55 inches thick - Solid piece of hardware. For anyone wondering what diameter the screw pin is as a fraction, the 18mm pin is about 0.55 inches, just a bit over 1/2 inch. That explain why my 1/2 drill wasn’t enough to enlarge the bronze bushing I put the pin through on the hitch of my Scag Liberty 36 mower. I want to be able to attach a large tarp or a large garden wagon to my Scag mower hitch for leaf season in the northeast and general garden work. Makes moving leaves around a lot quicker. I put 2 similar but smaller connectors on the reinforced grommets on a large tarp and connect them to this connector on my Scag hitch with a large carabiner. Works great! Review: Good product - Good
| ASIN | B08LL5THK1 |
| Best Sellers Rank | #162,516 in Sporting Goods ( See Top 100 in Sporting Goods ) #48 in Sailing Rigging Shackles |
| Brand | Hulless |
| Color | stainless steel |
| Colour | stainless steel |
| Compatible Groove Diameter | 12 Millimeters |
| Customer Reviews | 4.7 out of 5 stars 502 Reviews |
| Exterior Finish | Stainless Steel |
| Exterior finish | Stainless Steel |
| Fastener Type | Shackle |
| Finish Types | Glossy |
| Grade Rating | Grade 304 |
| Head Type | Ring |
| Head style | Ring |
| Item Diameter | 0.5 Inches |
| Item Hardness | Grade 8.8 |
| Manufacturer | Hulless |
| Manufacturer Grade | Grade 304 |
| Manufacturer grade | Grade 304 |
| Material | Stainless Steel |
| Material Type | Stainless Steel |
| Metal Type | Stainless Steel |
| Number Of Items | 2 |
| Number of Packs | 2 |
| Number of Pieces | 2 |
| Outside Diameter | 12 Millimeters |
| Part Number | hs-2010211857 |
| Screw Head Style | Ring |
| Screw Point Style | Ring |
| Set Name | Hulless Stainless Steel D Ring Shackle Set (2 Pcs, 12 mm, Grade 304) |
| Set Screw Thread Type | UNC |
| Size Name | 12 mm |
| Thread Coverage | Single End Threaded |
| Thread Size | 1/2 Inch |
| Thread Style | Right Hand |
| Thread size | 1/2 Inch |
| Unit Count | 2 Count |
R**T
The 18mm is solid and hefty - the 18mm pin is about 0.55 inches thick
Solid piece of hardware. For anyone wondering what diameter the screw pin is as a fraction, the 18mm pin is about 0.55 inches, just a bit over 1/2 inch. That explain why my 1/2 drill wasn’t enough to enlarge the bronze bushing I put the pin through on the hitch of my Scag Liberty 36 mower. I want to be able to attach a large tarp or a large garden wagon to my Scag mower hitch for leaf season in the northeast and general garden work. Makes moving leaves around a lot quicker. I put 2 similar but smaller connectors on the reinforced grommets on a large tarp and connect them to this connector on my Scag hitch with a large carabiner. Works great!
L**A
Good product
Good
J**A
These fit hitch on 2022 F250
I have a pontoon boat trailer with safety cable hooks that will not clip on to the hitch on my new-to-me 2022 F250. I only use this trailer to take the boat out of the water for service once a year, and never pull it far. These fit and are a good low cost solution for my needs.
A**R
Good for their size
These are good for tying trees off to one another when cutting trees close to structures. Work great stay true to form with heavy loads and pins go in an out easily Would buy again
J**R
Pin diameter missing from specs, so here it is
The one dimension not listed on the product description is the diameter of the pin. On many shackles, the pin diameter is more than the diameter of the rest of the shackle, so I measured it. Pin is just a hair over 7/16", or just a bit under 12mm, so slightly thinner than the rest of the shackle. Shackles appear well made. I needed something for my ATV hitch, which wouldn't accommodate the 7/8" pin on my 3/4" shackles, and so it was easier to buy these smaller shackles than drill out the thick steel to handle a larger pin. Seem to be a good grade of stainless. I've seen a few reviews that complain they weren't that strong. You're buying stainless, and due to its low carbon content, it's softer than typical carbon steel. You can get these in non-stainless, if strength is more important than rust resistance.
Trustpilot
1 day ago
2 months ago