wiiyii P8

It works on a 2010 Elantra. I have no temp gauge so that bothered me for the longest. I bought a cluster from another Elantra (2008, also manual transmission) and it didn’t work. The 2008 did have a temp gauge from factory, so I thought it would be plug and play. It definitely plugged in, but my tach didn’t work along with other things. Just putting that out there in case someone else ends up in the same situation I was in.This digital gauge works, and it works well for what it is and its size. But for 30 bucks, it’s overpriced for sure. Temu had this one for 10$ less but I figured the hell with it, just get it done and over with. I chose to mount in front of my oversized fuel gauge, being that it would only block two lights on the dash, the immobilizer light which I don’t have, and the engine temp idiot light which id no longer need 😂 so it worked out. Pictured below is a rough draft of where it’ll be, once I take the frame of the cluster out and do a bit of wire tucking

Very versatile for a obd display! I didn't like it on my pillar, so I placed mine on the dash and rotated the display in the settings. Let's you show speed, rpm, voltage, compass, and a variety of options. Holds up to sun pretty well except if the sun is coming from behind right onto it (but no display is really gonna prevent that)

Does not work on a 2006 jeep wrangler. Just reads “this vehicle is incompatible with OBD2”. I have a Bluetooth ELM27 obd2 reader that works just fine, only got this so I wouldn’t have to deal with connecting my phone constantly to monitor things. Cheaply made and does not function the way you would expect.Installing would be easy, it does have a gps function but CarPlay does a better job of that.

It works great. The installation is easy. I just hope you can programmed at least three of the wedges instead of only two I would like to get water temperature oil temperature, and volts and I can only get two of them. that’s why I’m givenfour stars instead of five.

So this seems like a really cool lil tool for older obd cars and it's very close in my opinion. Setup on my car was easy and had no issues connecting with obd. It's easy enough to flip through the menus and a small adjustment to the speedo in the settings and it is dead on with my cars speedo and GPS on my phone. Be a lil careful with leaving it plugged in. It has a power switch and I haven't had any issues just turning it off but some have said leaving it plugged in for long periods may still drain your battery. Best to just unplug it if you're not gunna drive the car for a few days.So now for my two big gripes after getting more into the unit. The first is the customization of what info you can display. You can only change the bottom most parts of information on each screen and it makes a lot of the screens less useful than they could be. I was most looking forward to the 6 unit display to easily show a number of parameters id want but since the top 4 parameters are locked im stuck with time running and distance traveled always being displayed. The second issue is the screen brightness. It's actually too bright in my case and while it's fine during the day at night it's blinding to have on the dash. It's supposed to have an auto adjustment but doesn't seem to change and manually lowering to its lowest setting is still too bright for my liking at night.Overall I'm a bit splitit does work and is an easy way to keep an eye on my water temps but it just could be better and ultimately left me a bit disappointed. I'll be looking for a revision or maybe a pro version with a lil more customization options down the road.

Great display for my Honda Civic 2000 LX to see the speed on a big number, the engine coolant temperature, the charging volts in my car from the alternator, and the hour/time at the same time on one simple display.Mostly the coolant temp to do not get the engine overheated since the temperature gauge never tells you exactly how hot your engine is. Plus adding beeping alarms on lower volt charging and high coolant temperature is amazing so it will warn you.

I have an aftermarket tuned AMG Benz and use this exclusively for monitoring my boost. It's perfect for that, as it's small and you can mount it in multiple ways and it has settings to adapt the screen display for whatever orientation works best for you.Plenty of people skewered the reviews for reasons that aren't the fault of the device. The temps etc that it displays are simply whatever the OBD data stream tells it- that's it. The speed may be a few MPH different from your odometer, but that's the speed it's being given by the data stream- OR one can use the GPS to determine the speed more accurately. Speedometers in cars are often incorrect- as they aren't required to be, as they have up to 10% variability allowed. This actually has the potential to be more accurate if you adjust the offset to "correct" the data stream. It doesn't interpret data- it simply reports it.I've had it in my car for a year now and no issues at all. On rare occasion, I'll use it to check other measurements, but it's really only being used to show my boost. This is by far the best HUD I've tried, and I've tried many of them and quite a few hit the trash or got returned for being awful.If you have a very early OBD vehicle, you won't likely get ALL the data streams you want and it's not the tool's fault- it's your car. Some people are just unrealistic and don't know enough to know what's at fault.For a simple display that takes very little room- you can't beat it!