Passive Keyless Entry System for DC12V Universal Cars, PKE Engine Starter Push Button Vehicles Start/Stop Kit Safe Lock with 2 Smart Key

This thing takes a while to install! While it is pretty straightforward, it definitely isn't a beginner level process. While it instructs cutting the ignition wires, instead, I left them connected and spliced into them for 2 reasons: 1) I don't know this manufacturer and wasn't sure it wasn't going to fail and 2) I wanted to maintain functionality of "key on, engine off" for the sake of OBD scanning. Other than some failing wiring issues I ran into (mostly due to splicing, definitely my fault), this product works great! Notes: This product uses negative (-) signals for the locks. This means I had to add relays in my truck to reverse this. Nothing major but some added expense. There's a wire that's supposed to connect to the oil pressure sending unit (tells the remote starter that the engine has successfully started and is running and anotherstarting attempt isn't necessary). But when I connected mine to it there isn't enough voltage to satisfy the unit so it kept trying to start the engine every 10 seconds after it was already running, resulting in grinding the starter. I fixed this by running my fuel pump wire from the ECM to a relay (it didn't have enough power either) then from the relay to both the fuel pump and the remote starter unit. I also had to defeat a couple mechanical ignition-activated anti-theft devices. In my case, the shifter lock and steering wheel lock. This adds some considerable time to the install. This isn't necessary if you cut the wires to your ignition and simply leave it in the "running" position.

De las mejores adquisiciones para mi vehículo !!

I got this kit because I really wanted the keyless entry and push start, and this was the cheapest one. Even the more expensive ones had problems, so I just said what the heck. Here are the problems: Short ground wires, and there are actually two wires for some reason. I snipped off the wire coming directly out of the box and used the ground on the ignition harness, and it works fine with just the one. A side note, the oil pressure wire is only used for remote start AFAIK. Using the push start activates the starter for a preset amount of time. Also, don’t connect the horn wire. I think honking the horn when you unlock and unlock would be very annoying for me personally. There is no trunk trigger or button on the remote, which is somewhat annoying if you’re coming from the store and want to load groceries. You have to open the door then open the trunk. The fobs came with no batteries. Really? There was no immobilizer bypass included, which is fine I guess but buyer beware. There were zipties included but not enough in my opinion. The button is okay quality. Sometimes I will press the button lightly and it doesn’t register. The instructions were pretty vague. If you’re going to install one of these, you must have a wiring diagram with wire colors as well as the factory wiring manual so you can see the locations of the connectors, pinouts, etc. *Make a gameplan before you order.* If you turn off the car while pressing the brake, it restarts. I would’ve rated 5 stars if not for this problem. It is so annoying. Please let me know if my unit is faulty and should not be doing this. Another annoying thing is that there are no DIP switches unlike the Easyguard kit to configure settings like these. This unit sends out a single pulse to unlock the doors, which in my car only unlocks the driver door. There is no way to reprogram this afaik. Very annoying... All in all, I would recommend this unit anyway. It’s so much more convenient than taking out the fob and key, pressing unlock, sticking the key in and turning it on. Edit 3/1 (6 months later) LEDs in push button have stopped working. It still functions. I’ve also had some issues. Sometimes when the car is on it doesn’t turn off unless I press unlock on the fob, and then I have to press the brake pedal to turn it off. It only does this maybe 1/20 times. Also, it has locked my fob inside once. The PKE antennas should be stronger. I’m also experiencing battery drain but I’m not sure if this is the culprit, I’ll update this to verify.

When it worked was pretty nifty. The passive entry sensors would only pick up a few seconds after reaching the door even if they were placed next to the door. After 8-9 months completely quit responding to the remotes and one remote killed every battery put in it. Went back to the $15 version I usually buy.

if installed correctly you will have the nicest system around. it works great and when you leave the car and dont lock it it will automatically lock itself when you are about 10 feet away from it. same is said when you walk to the car it will open when you are about 3 feet close without you clicking or touching your remote.

When installed according to installation diagram none of the buttons work. I used diodes to isolate the lock and unlock circuit on a negative trigger and the key fobs signal wasn't received by the unit. I traced my wires accordingly so I can only assume that either the diagram is wrong, the product was defective from the start or it isn't simple to install on a basic vehicle, such as a Hyundai, by following the diagram so it is not universal. Finally, I wanted to know if this thing was even receiving power so I swapped the starting motor wire with the battery + wire and it made a wining noise, so if it wasn't broken it probably is now, (Not like I could have made it anymore useless). Do not buy unless you want to take the thing apart and work on the circuit board because it's clearly got problems. Don't pay for a headache.

I installed it in my 2003 Ford Explorer and I love it, it is very practical although sometimes you have to take out the remote to open the car and I really like the remote start.

Todo funciona al 100%,lo única advertencia que le aria a todo que lo instalen que tenga una buena batería,porque tiene un pequeño consumo la alarma y si la batería está en mal estado se la puede descargar como me sucedió pero fuera de eso está perfecto muy cómodo todo sin llave.

cual se supone que es el cable del sensor de presión de aceite para evitar que la marcha siga funcionando? exelente producto

Smart key is not keyless Distance is worse than the original Accordingly, I cannot start the car from Jones to warm up the engine I'll take it off as it is useless to me. Lost it money and lost the installation fees, should've bought one from Ali express as I use to. Electronics from Amazon ... never again