Agri-Fab 45-0463 Pull Behind Broadcast Spreader,130 lb. Hopper Capacity Designed for Seed, Fertilizer, Salt, Ice Melt with Universal Hitch,12 ft. Spread Width for Riding Lawn Mowers and Lawn Tractors

I've owned this lawn spreader for over a decade now, and it has served me well despite some signs of wear and tear like cracking tires. I appreciate the plastic parts, as they withstand the corrosiveness of lime and fertilizer much better than metal. Maintaining it by washing, drying, and coating metal parts with WD40 after each use has helped prolong its lifespan. The slimed tires have been a bonus since day one. I have a beautiful landscape with varying terrains, from grassy meadows to wooded areas. While the spreader handles most areas well, some aggressive spots require adjustments in material distribution for better traction and stability. Occasionally, items getting caught can hinder the spinner's function, especially on challenging terrain. The aging unit shows signs of paint flaking, and I've had to reapply slime this year, signaling a need for refurbishment.Despite minor issues like paint wear and occasional blockages, this spreader has been a cost-effective investment at just $15 per year. I plan to enhance it with an edge guard and explore seat activation for the next unit to improve functionality. Remember not to over-tighten the plastic components to prevent cracking.

Assembly instructions OK but make sure you do a parts count first and then follow instructions exactly- tightening nuts too soon may make it difficult to fit other pieces later. I came up short one hopper brace, probably because the shipping box was flimsy and the part just slipped out. Operates just fine, though on/off handle can be difficult to reach, and if you start the flow before putting your tractor in motion it will dump excess whatever it is you're spreading in one place, which might kill the grass. So it's a bit of a contortion act. Hopper will not empty completely if hitch position is low because material will slide toward the front of the hopper and not reach the dispensing slot. I have contacted the vendor about getting a replacement brace, we'll see how that goes. All that being said, it can put down more in an hour than a smaller spreader can do in a day. I can also use it to salt my driveway in winter, so that's double-duty for me.

The Agri-Fab 45-0288 175-pound max tow behind drop spreader is an excellent addition to my lawn and garden assets. You can easily attach the drop spreader to a zero turn, ATV, or lawn tractor/mower with a tow bracket and cut your lawn while fertilizing or over seeding with grass simultaneously. Using my Kubota zero turn, I am unable to reach the flow control arm, however, using an ATV or lawn tractor I was able open and close the drop spreader. In addition to enabling me to maintain my one-acre lot of Kentucky blue grass and fescue mix, I’ve used the drop spreader to spread fertilizer and perennial rye, Kentucky blue, and Kentucky 31 grass seed mix for two of my neighbors. I am not sure if the drop spreader can hold 175 pounds of granular fertilizer as I only used 100 pounds and that nearly maxed the hopper’s capacity to the brim. The assembly instructions were simple and straight forward. It is important to note that that during the installation steps, my instructions stated that in order to initially calibrate the opening of the spreader on both sides, you are required to measure the two ferrules to one-half-inch. I recommend to simply move the flow control arm back to the off position and then screw the rod into the ferrule at the bottom of the hopper at both ends into the rod aligns with the hole in the end of the low control arm. I counted threads to try and ensure both ferrules were the same thread count, but also ensured the flow plate was closed against the hopper’s backstops. Once this was done, the flow control arm and flow plate were calibrated to the flow rate setting of my choice. Moreover, if the flow control arm does not stay in place or can easily move, simply loosen the self-locking nut or remove it and tighten the first self-locking note installed a bit tighter until the flow control arm is snug at any flow rate setting. Reinstall the backup self-locking nut and you are good to go. Some reviewers stated they used a bungee cord to hold it in place when all that is needed is a bit more torque on the first nut to give the flow control arm more resistance. For most applications involving fertilizer or grass seed, the 1 or 2 flow rate setting works just fine. You will always have to according to your task make adjustments to suit your particular drop rate. The Agri-fab 175-pound drop spreader works great and enables me to fertilize or over seed without worrying about fertilizer being broadcasted on my driveway. Maintain your 3 mph and according to my neighbor’s view of spreading seed, the hopper and flow plate opens and drops those babies right where you want it. Since our properties are right next to each other, I used the drop spreader particularly on our properties boundary lines as I have my luscious Kentucky Blue grass rocking at 3.5 inches height and we didn’t want any cross contamination from that pretty perennial rye, Kentucky Blue, and Kentucky 31 tall fescue hardy mix he was throwing down on his yard. It is imperative to pay attention to ensuring the flow control arm is completely closed and the flow control plate is closed tightly against the hopper’s backstops and adjust the ferrules on both sides until you can insert them into the bracket holes and you should have a well calibrated drop spreader to handle many of your lawn and garden needs.

We have a 20 acre farm and about 5 acres of it needs to be receded for our small herd of cattle. Looking forward to using this. It seems to be well built. We will be attaching it to our ATV and it seems like it will be super stable. I love that it has a high storage capacity for a big bag of seed. Once assembled it's really not that heavy and easy to move around. It was a little bit complicated to put together. Just take your time, it took about 45 minutes. But once it's together it's super stable and a good value for your money. We didn't have any missing parts. And I think this is going to fit right into our need at the farm perfectly.

Molto ben fatto .. solido e capiente...

I just ordered this and used it yesterday. Assembly took about 45 min and the directions were straight forward. Like others have said don't tighten everything until its all together as it makes alignment of parts easier. I loaded it with 100lbs of granular fertilizer at once and had no issues. I kept the spread rate a little light and covered everything twice in different directions for an even spread. Like all broadcast spreaders it favours one side the way the product hits the spreader wheel. In all I covered a out 2 1/2 acres and had no problems at all. I didn't have any of the negative issues that so many other reviews list. No wheel skidding, tipping, missing parts, difficult assembly, etc. I was extremely impressed with the performance and would highly recommend this product.

Semer du gazon, épandre de la chaux et engrais

I bought the spreader and it arrived on time but was missing a support arm. I contacted the seller gave them all the information needed to get me a replacement. They then went to work in getting me one sent out (some days later it arrived). The support arm arrived and as you can see by the picture they sent out a black one instead of orange. Bearing in mind they have all the information of what I bought you’d think they’d get it right. I’ve had the spreader for a couple of weeks and I can’t wait for them to send out another to replace the black one. I need the spreader in action now so I’ve bit the bullet and cracked on. I’m happy with the product and happy with the customer service. I’m just miffed at their attention to detail. Very poor. 🤬😖😤

Hallo zusammen, heute habe ich meine Wiesen eingesät bzw. nachgesät. hat wunderbar geklappt. Auch der Zusammenbau war kinderleicht. Beschreibung absolut ok.