YOOPAIYOOPAI 3D Printer Enclosure, Fireproof Dustproof 3D Printer Tent for Ender 3/Ender 3 pro/Ender 3 v2/CR-100, Constant Temperature Protective Cover Room 18.9”x 23.6”x 28.4”

This enclosure worked great and exactly as it stated. I used it with my Ender 3 v2 and it fit perfectly. Super easy to put together and the zippers are high quality, metal zipper with metal teeth and material is a heavy nylon.I used the enclosure on a 70hr print and there was no issues, there is plenty of room so the printer will not touch the enclosure or the enclosure will not compromise a print by getting in the way of the moving parts of the printer. The enclosure does great at keep the printer at a constant temp even when there is a temperature change in the room from wind blowing through windows or Aair conditioner blowing threw vents and fans running. when printing with ABS you want that constant temp  without any drafts or dust effecting the print and the enclosure does just that, Plus is nice because it will keep dust from the printer when you are not printing, which isn't that often lol. I'm thinking I might have to get some more of these enclosures to put on my other 3d printers!

I got this enclosure so I could branch out from PLA and start printing with materials like ASA and ABS without concern for warping or structural defects. It fits my Ender 3 Pro perfectly including a reel of filament mounted on top of the printer and all the little accessories I printed for it along the way like a tool holder and a filament guide arm. All of it enclosed with no problem inside the tent. The AC power cord goes right through the little opening, which is in the correct location for Ender 3 Pro (bottom right back). The tent was easy to set up without tools. You only have to push the rods together like Tinker Toys and fit the structure inside the tent material. It all comes right apart and folds up just as easily. The tent feels very durable and good quality overall. My first print with ASA went very well using this enclosure. The tent contained the heat and the smell very well.

It's a great tent, material is good quality and easy to put together. Print quality has improved from reduction in airflow and opens the possibility of printing with higher temp filaments by heating the enclosure. It would be nice if it were an inch or two larger to make removing and inserting the printer less of a pain, but that would be my only complaint.

Well...I like the idea of it... but once I got my printer in it (Ender 3 v2) I felt so confined...if I needed to turn my printer around (like..to put the plug back in) I had to fight with the cover. To feed the filament into the hole was a pain in the ass because of the cover...even though there is a Velcro flap on that side of the cover, the opening was cut too low for me to see the hole to feed the filament in and there isn't Velcro on the other side of the flap to hold it up..so I had to hold it up out of the way AND try and feed the filament into the hole. My husband put it together to that part I didn't have to fight with.It seems well made, nicely constructed..no real issues with the zipper so far. I did take my printer out because I couldn't deal with the constraints of the cover, but rather than return it, I am using it to store my filaments. It's roomie enough to put some shelves in for the filaments to sit on and stay dry, so there is that!

The tent is well made and should last for a long time. If you are having trouble with your prints lifting and have tried all other fixes (brims, rafts, bed temp, etc.) this may just be the answer you're looking for. This tent keeps the air surrounding the print warm and therefore keeps the plastic layers warm, minimizing any warping. To give a brief 101 on why prints warp: The bottom few layers of your print stay nice and hot with a heated bed. As the print moves up, the higher layers don't stay warm, so they start to contract. That contraction pulls the print upward, giving you the unwanted corner warping. This tent helps fix that issue by keeping the upper layers warmer so the contraction is reduced.If you're on the fence about it, buy it. You won't regret it.

I have debated for some time putting my printer into an enclosure. I thought about building one but ended up purchasing this one from Creality to save time. I wasn't disappointed. It was very easy to put together, slipped right over the top of my Ender 3 Pro, and accommodated the top mounted filament spool holder. It maintained heat well and the window and access door provided for easy access to the printer without having to remove the enclosure. Sound was diminished SOME, but not much...although my printer is pretty quiet to begin with. From a seller standpoint, the item arrived quickly without any defects. There was a nice thank you card inside with email address for customer service. I highly recommend both this product and this seller!

It's durable. It's HUGE.Only drawback is you will have to cut a hole in it if you have a filament heater.My office isn't climate controlled and is very dusty. This solves both problems with one simple, affordable solution.

I did not realize how much heat my Ender 3 Pro generated until I got this. It dampens the sound and keeps the heat in. It was easy to put together. Fits my printer nicely with a web cam and a octopi with enough room for everything.Also a bonus is that the reflective inside helps my LEDs light my print better.

Very easy to setup, has just enough room for the ender 3 pro with a 1 kg spool mounted up top. Does a good job at holding the heat in.