Exedy Clutch Kit - NSK1000

Pretty much oem and easy to install

Install was straight forward and works great! My 06 350z is sliding easy again haha

2005 G35 Sedan 6MT. Feels slightly stiffer than the OEM LUK. Was weary at first but I chose exedy bc I've run their clutches in many of my cars. It was a good decision. Very nice fit. Works great. Pressure plate fingers looked beefier than the OEM LUK one I took off. Grabs great and friction zone is very nice. 5 stars.

good clutch kit, this is to the best of my research a direct OE fit and is compatible with the dual mass flywheel. problem is, you cant really tell the condition of your flywheel until you get the clutch off... if you get it off and find the flywheel cant be resurfaced (which is common on DM flywheels to my knowledge) you're stuck until you can get the matching flyhweel.for those who need a quick job i recommend getting the version of the kit that comes with the flywheel.i had a shop install this, and i dont know if i should blame the shop or the part, but i get a lot of chatter in idle with the clutch out. otherwise, its pretty much exactly the same as the original flywheel.docking one star for the chatter in idle. otherwise, excellent part.

I just finished a clutch/flywheel job on my 04 350z. My last clutch was some crappy XTD stage-1 from ebay. It gripped way to hard from the get go and had severe chatter issues as well as a bum throwout bearing. I believe the place that did the clutch job botched it anyway so I do not think I can blame the clutch. There was still plenty of friction material left. I have only driven about 100 miles on this new Exedy clutch, but I have to say it is smooth as butter. My clutch feels even better than a new car. I still have a little bit of chatter but that is mostly due to lightweight flywheel and differential bushings are soft. You can't beat the OEM feel of this clutch for the money. Will buy again.

Went on a 05 G35 6 speed, the factory Nissan stamped clutch is a Luk. This pessure plate has a good solid heavy feel. Disc and pressure plate are made in Japan. I didnt pay attention to the throwout bearing but I didnt see Koyo stamped anywhere.Came with alignment tool also, so I didnt have to drive around looking for one. Great deal for an OEM replacement.

Came with little damage. Nice a soft shifting. Oem feel. Pedal sticks a bit, but overall ok product

I was so iffy for buying this kit but i’m 3k miles in & BOY this thing feels good! Works EXCELLENT!2004 350Z!

Quality OEM+ replacement. I put the '+' because although it's described as OEM I think the quality does exceed it. Very strong holding power and even moves the car without pressing the gas at all! Of course the person installing the clutch may impact your overall impression, but if installed corrected and is properly bedded, this clutch will not disappoint!