DAOKI 100Pcs 6x6x5 mm Miniature Micro Momentary Tactile Tact Touch Push Button Switch Quality Switch SPST Miniature/Mini/Micro/Small PCB

The button’s actuation is consistent, with a crisp click that provides clear user feedback. Installation is straightforward, fitting standard panel cutouts and integrating seamlessly with microcontroller inputs or custom circuitry. Overall, the Spec Button excels in both design and functionality, making it an excellent choice for projects requiring reliability and a premium tactile experience.Good values. This bag will last me for years, used it on my fireplace remote.

Tiny little button! Exactly what i needed and worked perfectly! Excellent quality.

Works well! Very worth the price as it comes with a lot and are super simple to use since it only has 2 pins. They're smaller than I expected which is not the manufacturer's problem. They worked well for my project with a breadboard and arduino nano! I connected 1 pin to the (+) rail (that was already connected to 5V from the arduino), then the other pin was connected to both an arduino digital pin as well as to a resistor that went into the (-) rail (already connected to arduino GND). I used a test code, checked the serial monitor, and it worked! // **** BUTTON TEST **** // const int buttonPins[] = {5, 6, 7, 8, 9}; // Your 5 buttons // const int numButtons = 5; // void setup() { // Serial.begin(9600); // Start Serial Monitor // // Set all buttons as inputs // for (int i = 0; i < numButtons; i++) { // pinMode(buttonPins[i], INPUT); // assumes you’re using external pull-down resistors // } // } // void loop() { // for (int i = 0; i < numButtons; i++) { // int state = digitalRead(buttonPins[i]); // if (state == HIGH) { // Serial.print("Button on pin D"); // Serial.print(buttonPins[i]); // Serial.println(" is PRESSED"); // } // } // delay(200); // So it doesn't spam the monitor // }

Works well. Exactly as advertised.

I would have been happy paying $6 for 10, but getting 100 switches is an incredible value. The build quality is great and the clicks are very pronounced. There is no mistaking whether or not you hit the switch. You will know. These would have fit perfectly in my Logitech G602 for the middle click button, bringing it back to life. Unfortunately, they are not suitable for mice. The major problem I have with them is that they are very hard to press. While this button is a direct replacement of the middle click for my G602, I fear that it would break my mouse wheel after enough clicks. Also, it's quite loud compared to the OEM button. Looks like I'll have to go through another retailer for the switch I need (OMRON B3F, for anybody curious).

Put in some 3D printed fidget toys. The clicking was very satisfying and I got plenty of buttons. Worked well, some of the prongs were slighting bent out of shape but were easy enough to fix. They're small, so be careful to not lose any around pets or kids

These buttons have such a satisfying click when you push them. Easy to use and worked perfectly for my project.

Got these to repair my G600. Worked perfectly. They're a little taller than the original switch and stiffer but they will work. I think the click they have is a little more satisfying but I'm just happy my mouse is working