WDAFLG 2 Pcs Tap Valves Replacement, Universal Disc Cartridge Insert Faucet Valve Quarter Turn 1/2" Brass Ceramic Tap Valves Replacement with Screws for Bathroom Kitchen Tap (Blue & Red)

Easily fitted to my Norrie kitchen sink spring tap. Appeared to be good quality even though I was quoted six times the price from alternative suppliers. Fitted today so time will tell but at this price you cannot go wrong.

I got these to fix dripping taps. The hardest part of the process was getting the old ones off but of course that's nothing to do with this item. Once I got the old ones off, installing the new ones was very easy, but the red and blue colours were the wrong way round for the hot and cold taps, so had to swap them over. I also found these are a bit stiffer than the old ones and haven't really loosened up after a few months of use. On the bright side they haven't started dripping either so overall they are good for the price.

I recently needed to replace the valve on my tap due to the cold side dripping, and this product was the solution. It was a quite easy to install. Considering these type of valves come in two sizes, make sure to check the original size and once you have the measurements, match them with the corresponding size options provided by the seller. Double-checking the size before purchasing will save you the hassle of returning or exchanging this product.Considering it has been over a year since I have installed these values and the tap no longer leaks, I am very happy with my purchase. Ensure to replace both hot and cold while your doing it Considering both come with the order. These valves are durable, easy to install, and the perfect solution for anyone dealing with a leaky tap. Highly recommend!

I had an issue with my cold tap dripping. Found a DIY video on YouTube and realised how easy a repair would be. Advised to replace both hot and cold and not just one as they were both likely to be as worn out as each other. Also advised not to buy the replacement plastic parts as there is so many different sizes and standards.It is very, very important to remove to old cylinder and measure. Fortunately I did and that saved me the hassle of returning the wrong size. (why aren't they standardised??)I firstly fitted the cold cylinder and quickly realised that I needed to fit the hot cylinder to the cold output as the colour base indicaters were the wrong way around for my system. I have hot on the right hand side for all taps.Secondly, keep the small tap head screws to reattach the tap head. The supplied ones may not be wide enough. My old screws - attached to the new cylinder were too long so I used a small 'O' ring on the head end of the screw to ensure a good tight fit.Once all this was worked out by trial, and much error, replacing the hot tap with the new 'cold' cylinder was a doddle.

These were a great easy install, taking 10 minutes each side. Unfortunately they lasted a matter of months and now are dripping profusely. Buy cheap, buy twice!

Saved me loads of money buying a complete new tap, easy to fit, cheap as chips and still going strong

All good

perfect fit, good value and did the job, came with screws