Gigabit Type C PoE Splitter 5V 3A, IEEE 802.3af/at Standard, 10/100/1000Mbps Type C Power Over Ethernet Splitter with RJ45 Port and TYPEC Port(TYPEC0503G Black)

It does what it is described as. Have been using it for a while and it has been working perfectly since day 1.

works

This was used to convert my Hubitat to a POE device, eliminating the need to run power along with ethernet. The device worked flawlessly, instantly receiving power and allowing my device to connect. I've bought a few more with the idea of eliminating plugs where I can.

Power cycled every 30 minutes under light load (less than 12 watts). Horrible, unreliable product that nearly killed my equipment. Do not buy.

DOes what it needs to do...

I’m using this to power a Raspberry Pi 4 that’s mounted in a remote location. It works perfectly. Just plug and play.

Plug and play to power a Hue Bridge Pro off a Ubiquiti POE switch. Works great.

Compre este adaptador PoE para mi Homey Pro (2026) para que lo alimentara por corriente y data a la vez pero resulta que solamente lo alimenta por corriente y no trabaja la data sin que conecte el cable RJ45. Estoy decepcionado de la compra y de confiar en la IA de Google que me aseguro que si funcionaria pero no es asi

Works as expected, no issues so far. Ultra handy to have around. Using it to power my CM4 BliKVM/PiKVM.

I tested mine to 3.6A for use with the PI4 and it handled that with no problem at all. It obviously does depend on the quality of the Cat5 or 6 cable you are using. I have found that usually cat 5 cabling seems to be better on the edge of transmission distance than cat 6. There isn't much about it online, but if you chop a cat 6 cable its usually thinner gauge copper better for data worse for power. The only issue you may encounter is that if you plug in heavy loads into the PI it could cause a reset since it crowbars the supply and there is very little capacitance on the output.

Es para una raspberry pi 4 que está conectada a un ssd. Funciona y parece suministrar la energía precisa. Una solución mucho más barata que el hat poe de raspberry y mucho más accesible a la hora de obtener.

Ne ho comprati 5 e funzionare funzionano (h24 da oltre 2 anni), il problema sono le dimensioni. Non è piccolo da "nascondere"/gestire. Cavo molto rigido. Alimentazione usb (C) sicuramente meglio dell’alimentatore proprietario (che però veniva incluso nella confezione). Fortunatamente consuma poco e basta un vecchio alimentatore per telefonino (che però non sarà certamente usb C).

Worked great at the start, but after 5 months the connected Raspberry Pi started with Undervoltage messages. These went away with the original adaptor. Conclusion, this PoE adaptor is broken.