FLASH HOBBY D4260EVO 4260 (3530) 600KV 800KV RC Outrunner Brushless Motor for UAV Aircraft Multicopters RC Plane Helicopter (600KV)

Very nice brushless motor I bought for my tamiya bruiser with a sh750 rs motor,Correct size but it's a outrunner and NOT a inrunner in which I need, so I can't use it.

In the few test runs that I've done, this motor puts out adequate power for my needs. On a 12x6 prop and 6S battery, I am pulling 60A at full throttle and it's right at 1,300 watts. This is perfect for the Sbach 342 that I intended to use it in.This is my own fault for not paying attention, so I wasn't too upset... The only prop mounting option is the collet adapter that clamps onto the motor shaft. On a motor of this size, you would expect to also have a prop mount that bolts directly to the can. I have quite a few bolt-on prop mounts sitting around, but this motor has an unusual bolt pattern on the can so none of my spares would work.I could not use this motor the way it comes from the factory. I had to loosen up the shaft and push it to where it sticks out on the can side. This was more difficult than any other motor I've done this on. The tolerance for the shaft was so tight that I had to heat it up with a propane torch to move the shaft (thus risking the glue on the magnets melting). I got it repositioned, but it took a lot of heat and hammering.Overall, this is a great motor if you can get by with just using the collet prop adapter. I do not feel safe using that on props that are 12", or larger, so this motor will sit on my shelf until I find a use for it. If this motor had options for a bolt-on prop adapter, it would definitely be a 5-star buy.