Question 1

Do you sell the replacement inserts?

Accepted Answer

Hello dear customer, very glad to tell you that we started selling original blades, this is the product link:
https://www.amazon.com/dp/B087BDMCZ4
Any questions, please feel free to contact us.
NITOMAK Shop

Question 2

Depth of cut, Inches per minute, chip load to place this cutter into the database Binstak can you provide information besides the rpm is a max. 16000

Accepted Answer

I had great luck with this cutter on my home made slab flattening sled. The toughest part was sanding after flattening, so be patient while cutting, and sanding will be easier. I recommend cutting one direction only, 1/64” to 1/32” deep, and not more than about 1/4 to 1/3 of the cutter diameter per pass. More than those will leave the grain “pulled” in different different directions, especially if you’re cutting hardwood end grain. Patience on cutting will save a ton of sanding. Plus, too much rough sanding also can spoil the flatness. Finally, it makes one hell of a mess!  Best outdoors, with a vacuum hose jigged immediately in front of the cutter to catch the bulk of the sawdust jetting out ahead of the cutter. 
Patience!  Less is more!

Question 3

Do you have 1 1/4 diameter?

Accepted Answer

Dear customer, sorry, we don't have. we sell 1" , 2" and 3" diameter bit.

Question 4

Does this come with the cutter heads?

Accepted Answer

Dear customer, it comes with 1 set initial insert blades. We sell original inserts and screws. The parameter of insert is 12mm*12mm*1.5mm, 35 degree, straight hole. The type of screw is M4-6. 
Inserts link: https://www.amazon.com/dp/B087BDMCZ4
Screws link: https://www.amazon.com/dp/B08VN25YZV
You also can refer to this parameter to buy accessories from other places.
Any further question, please feel free to contact us.
NITOMAK and BINSTAK Cutomer Services Team

ASIN	B085QGLHB4
Best Sellers Rank	#207,365 in Home Improvement ( See Top 100 in Home Improvement ) #482 in Edge Treatment & Grooving Router Bits
Brand	BINSTAK
Brand Name	BINSTAK
Customer Reviews	4.6 out of 5 stars 586 Reviews
Cut Type	Straight Cut
Cutting Diameter	2 Inches
Cutting Length	2 Inches
Item Diameter	2 Inches
Item Weight	191 g
Manufacturer	NITOMAK
Material	Carbide
Material Type	Carbide
Model Number	3 Wings-Insert Carbide Router Bit
Number of Flutes	3
Part Number	BK-200310
Size	1/2" Shank-2" Cut Dia. (3 Inserts)
UPC	686082999786
Unit Count	1 Count

CNC Spoilboard Surfacing Router Bit, 1.3cm Shank 5.1cm Cutting Diameter, Insert Carbide Slab Flattening Router Bit Planing Bit Wood Planer Bit by NITOMAK

Details

Details

Description

Specifications

Common Questions