2 Ports USB 3.0 Extension Cable, Flush Mount Car Truck Boat Motorcycle Dashboard Panel Adapter-3 Feet

Bought this so I could mount it in my 2011 Ford F-150 XLT ,My Kenwood came with USB extensions , but I wanted to make it look stock . Hole saw bit , Mounted and looks like it came with the truck .This setup is REALLY nice . Strong but looks vibrant and new . Cables are over built with strong but flexible wires . Outer sheathing is SUPER nice material . Slick , bright , and strongThe cable stress reliefs are in every place they should be ,making it worry free of loose solders later down the line To be honest , it feels and looks almost water proof if not resistant at the least .The mounts and nuts are really nice with zero flash or burrs left overRubber cap is nice durable rubber and covers it snuglyTerminal jacks are REALLY well built with a strong connection but release without yanking on them .Paired up with Android Auto SUPER FAST with NO lag whatsoever .My Motorola Power charges just fine while using these usb ports/cablesBest bang for the buck NO DOUBT in my mind . I feel confident in saying to everyone , BUY IT . Its a steal and worry free.And as always thank you Amazon Prime for faster shipping than The Millennium Falcon can make the jump to hyper space !!!

Please to say that this 3.0 USB extension works well with Android Auto. If this is what you are looking for, this works!

Purchased to replace cigar lighter in 2012 Ford Expedition when installing new head unit.Head unit has two USB connections and I didn't want extension cables running loose through dashboard cracks. This brings the USB ports to the front while eliminating a nearly useless cigar lighter. Provides for a super clean installation and connection/charging point that looks like it belongs!Data transfer seems to have no problems. Charges at full speed of the head unit's capabilities. Installs nice and clean. Wires are long enough to give lots of location options while still reaching the head unit's USB connections.Highly recommend for this application!***UPDATE APRIL 2025***This was originally purchased and installed in August 2020.In April 2025, nearly FIVE YEARS after installation, I started receiving 'USB OVERCURRENT DETECTED' alerts on my head unit. I believe this component has failed - AFTER NEARLY FIVE YEARS of DAILY use!! That is NOT a complaint!! It's a testament to the quality of this item!!I will be purchasing a replacement since this one lasted so long and has worked so well for it's entire time installed!One thing I have learned - I recently switched from Android to Apple and with my head unit (Kenwood Excelon DNX696S) only one port is compatible with Apple's CarPlay while Android Auto is usable on both. I am certain this is a head-unit thing and NOT this item, but thought it was noteworthy.

I did not want to use the cover, as I'm going to have a USB key with my audio library plugged in all the time. But this acts as a holder for the cover - without the cover it's a little too large to fit in the standard sized opening, but just small enough where it attaches crooked. The housing is a dense rubber material, so it was easy to trim. Took about two minutes. The next issue was threading the collar behind the dash panel. I had to 3D print a collar to add space between the dash and the collar. That's because of my dash design. But it's done and looks great. One caveat - there's a LOT of wire. I had to really finagle it so it all fit and the dash cover snapped back on.

Very Good

Shipped fast. Exactly as descried and seems to be of good quality

I installed a new Pioneed head unit with a rear USB port into an Audi A4, and I didn't want to have a USB cable dangling from the side of the center console. I wanted to bring USB access closer to the cabin and keep it clean. This product was exactly the solution I was looking for.The cigarette lighter in the Audi is near the arm rest in the center console, and its housing is very easy to unclip and remove. Once I popped off the housing, I removed the cigarette lighter from the housing, popped in a USB adapter, plugged one end of this product into the adapter, taped it all together, and shoved it inside of the console. I ran the other USB cable to the radio. Once everything was wired up, this thing screwed into the housing like it was meant to be there. It was a PERFECT fit. The result is seamless. I had no compatability issues whatsoever, and I was able to use my phone, an SD card, and a flash drive to connect to the Pioneer with this outlet.

I purchased this with the intent of replacing the cigarette lighter port for a cleaner appearance and an easy connection to my aftermarket car stereo. Install was rather straight forward and it is serving it's role perfectly. If you feel that the USB port is not working, check your USB cable as there are specific types that will work with your iOS or Andriod phone. For example, I had to purchase a genuine Apple lighting cable in order for the interface to work correctly with the cables connecting to my stereo. It's a bit of an inconvenience but it is best to know rather than test it out, find out the interface does not work and get potentially led down the wrong path thinking that the cable or the stereo unit is defective.