Homewerks Worldwide 7146-80-MS Bathroom Fan Integrated Dimmable LED Light Humidity Sensor Exhaust Ventilation 1.5 Sones 80 CFM, Smart Motion White

We purchased two of these, one for each of my teenage daughters bathrooms. The automatic sensor is a lifesaver. My daughters never turned on their old bathroom fans and the steam was ridiculous. There were water streaks and mold spots on their walls. With the sensor, they don’t have to worry about it and neither do I because it comes on automatically to clear the steam. It’s much quieter than their old fans too.The light is also very, very bright, which is appreciated. The night lights are nice but my girls don’t use that feature. It will be nice to have when guests visit though. We love the sleek and modern look of the touchpad in the wall. There’s nothing we don’t love about this fan.For us, the fan was smaller than the one we had before, so we had to do some drywall work. When it came to installation, it had to be done through the attic space. Luckily, I have a handy husband and he did awesome work, which was well worth it for this fan. I highly recommend it!

Motion sensor isn't on the switch it is on the light part of the ventilation fanFan noise is quiet enough but not silent and easy enough to install. Keeps out all the moisture from even extednded showers

My light/fan fixture had issues right after the return window was over. I contacted the seller and they assisted me with troubleshooting the issue and sent a replacement fixture. Love the light/fan fixture and would recommend and would purchase again.

I bought this fan primarily because of the light, night light, and humidity switch. Out of the box it seemed to be solidly made and I was glad all the features supposedly would operate from only a standard 3 wire electric cable. Installation however was a beast, and I believe whoever wrote the instructions never even tried to follow them. The instructions say to cut a 9.25 by 9.25 inch hole. The fan box is a little smaller so it theoretically will go up from below. It needs to go up from below because there is a a ceiling flange around the bottom of the box so it fits snuggly to the ceiling. However, to get the fan up into the hole, I had to remove the the device at the front where the duct connects (easy enough) because it sticks out several inches. Also, there are "metal tabs" for mounting to a joist that stick out about 2 inches at the front and back. These should have hinges or something - I had to hammer them flat against the box to stay within the 9.25 inch profile (after pushing the box up through the hole, I had to then bend them straight again (not easy, as they are fairly sturdy). Finally, there are the sliding "suspension brackets" which the instructions suggest should be attached once the box is in place. This is not possible with joists placed 16 inches apart. Because these brackets are 14 inches long, they also will not fit up through a 9 inch hole. I cut them down to 9 inches and bent over the mounting tabs on the ends, so I could push the box up through the hole. Then up in the attic, lying on my stomach in tight quarters, I had to straighten out the 4 tabs I had bent to make it fit, extend the suspension brackets, reattach the duct attachment, and nail or screw it all in place. I hope it lasts a long time. Wiring the box and switch to my existing cable was actually easy. The features mostly seem to work, although if there is a motion sensing feature , it is not working on my unit.

Fan was installed as part of bathroom remodel so installation was easy. Contractor said it would not be easy if done as a retrofit. Nice design and worked great for 4.5 months, then the control switch stopped working properly. The power light can be turned on, but light and fan buttons no longer respond. I have contacted support to see if this issue can be resolved. Will follow up this review after to add info on explanation and customer service.update - 4/7/23After filling out web form for customer support with my issue, I received an email telling me that they will send a replacement control switch. It is back ordered so should be here by month's end. Since it is a guest bathroom, it is not an issue for me. I will update again once the new switch arrives and installed. Rating upped from 1 to 3 stars.update - 5/9/23Received replacement switch a week ago and installed it myself today. Everything works fine and thanks to the company for standing behind their product and customer service response. I love the features on this fan and we shall see if this new switch last. I have attached an internal picture of the bad switch. Looks like it was made in 2020. Upped rating to 5 stars.