🚀 Elevate your 3D prints with the ultimate release liner film!
ELEGOO’s 5PCS PFA Release Liner Film is engineered for 6.6-inch MSLA 3D printers like Mars 3 and Mars 3 Pro, featuring a precise 146x195mm size and ultra-thin 0.127mm thickness. It boasts superior temperature resistance, 95% UV transmittance for faster curing, and a lifespan 50% longer than standard films—delivering up to 9000 smooth, bubble-free releases for flawless, professional-grade prints every time.
A**T
What I needed for mars 5
Works great. Easy install and not too expensive.
K**R
Way better that nFEP replacement
I got caught by the videos that nFEP was better and replaced one of my VATs with nFEP. That was a nightmare in separating the layers of the nFEP and putting it on the VAT.Elegoo has it right. The ACF is clearly labeled with an easy to use removable center section that contains instructions. Took me seconds to remove the film and put the vat back together.The nFEP was more finicky and if it really did provide superior prints over ACF that was lost in the higher rate of support failures. My MARS 4 ULTRA came with ACF and that is the easier solution for me. I don’t have to fiddle with different settings for small, medium, and large prints. The ACF works well with a single dialed in setting.
E**T
Works fine, takes some time and patience to install.
This works for Saturn S printer.
D**N
You WILL need this at some point, so get it now and you will have it when the need arrives.
This is a consumable for resin printing. It can get damaged by bits of loose cured resin. It can lose it ability to release, it can get scratched, or cloudy, and heaven forbid, it can get a hole in it. It needs to be changed at some point. For the Elegoo printer, this process is fairly easy. You get the film, and complete instructions on how to change it. (This film is their version 2, which is an upgrade) You will need three different Allen wrenches. The sizes are in the directions. If you purchased the extra tanks, you will get those and some extra screws with them. As a side note, screws are easy to drop and lose. I recommend you get some extras. Also, T handle Allen wrenches are MUCH easier to handle than the L shaped type, which have a tendency to wind up on the floor during use. Extra tanks, film, and some tools are needed for resin printing so be prepared and have this stuff on hand.
J**M
Easy to install
Just follow the directions. I did and replacing the film was very straightforward. You don't need an additional fixture for installing the film.
D**D
Cheap and good quality
Easily to install and cheap I would buy it again when I need a replacement for my 3d printer Mars dlp
D**N
Works great
My favorite release film for elegoo mars 4 printer line. I use it on the mars 4 ultra aswell
O**L
I recommend this product
Item as described: fit, price are good, as expected.
Trustpilot
3 weeks ago
1 day ago
