Rust-Oleum 207014 Marine Wood and Fiberglass Primer 1-Quart

Dries to touch super fast....Great primer....You have to work quick though if you are rolling inwarm temperatures.

Very easy to work with and thins out great. Enjoyed painting with it. Thank you.

Great when paired with rustoleum marine fiberglass paint. Our old shower looks awesome. Holds up great. NOTE: Refer to YouTube videos first on details of how to paint shower walls and safety tips. Very strong odor. Need well-ventilated area.

Great easy to go on

Unlike latex paint that can be stirred fairly quick even if heavily settled, this stuff had an inch of sludge that took a full 10 minutes of dedicated stir to get "most" of it mixed. That is eternity for a quart of paint.After using an inch of the can, I was able to stir more vigorously and still took a few minutes to get it mixed. There was still smaller strands of gunk but I was able to deal with it.The product itself is great.

I have not had a chance to actually use this product yet. The bad news, when I opened the box, it had been dropped somewhere. The can top was dented and cover off. Worse, the impact had torn the plastic bag they wrap it in. Paint sort of exploded everywhere as I ran out of the house to toss it outside. SO, when you get a package of paint, open it outside first. The good news. Rustoleum customer support is extraordinary. I called (it's a bit to get through their phone tree, but what company isn't these days?) and they way more than made up for my trouble. By a lot. Cannot recommend this company enough.

This saved me thousands of dollars! I’ve trying to get a contractor come give me a bid to replace the shower stall, they never showed! So I came across this and thought I’d give it a try.-the primer is thick and settled on the bottom, my husband put an attachment on his drill and in less than 5 minutes, it was mixed and read to use, no big deal-it is extremely strong, we have no fan in the bathroom, 4 days later I’m still flying high 🤣 probably should have masked up or used a fan-I sanded the fiberglass shower with 220 grit, then used a cloth to wipe it off, then started priming.-cranked my thermostat to 75 degrees, the primer dried and I started painting within an hour. On my 36” shower, I had just enough primer to do the walls and pan with one coat. Then I used the Rust-Oleum paint and did only one coat, had leftover paint from my one quart can. It was close with the primer, I was definitely sweating running out, but one quart accomplished the job.-start to finish including sanding, primer, and paint, only took 4 hours-End result…. I spent $70 and it looks like a new surround, wish I had done it 2 years ago when I bought the house!

This product had to have been sitting on a shelf for a long time!Couldn’t hade stir and made a drill driven tool to stir,after 20 minutes was still clumpy! I brushed it on but am very disappointed. I will never buy this again.