⚙️ Upgrade your ride with Bosch precision – because your engine deserves the best!
The BOSCH 15284 Premium OE Fitment Oxygen Sensor is a factory-tested, direct-fit replacement designed for select 2003-06 Buick, Cadillac, Chevrolet, GMC, and Isuzu vehicles. Featuring a fast-acting heater that reaches operating temperature in 2 seconds, a durable double laser-welded stainless steel body, and pre-coated threads for easy installation, this sensor ensures superior engine performance, reduced emissions, and long-lasting reliability.
| Brand | Bosch Automotive |
| Item dimensions L x W x H | 2.2 x 1.97 x 5.83 inches |
| Material | Stainless Steel |
| Item Weight | 0.15 Pounds |
| Style | Oxygen Sensor |
| Maximum Supply Voltage | 5 Volts |
| Measurement Accuracy | High Accuracy |
| Measuring Range | 4.5 - 5.5 V |
| Mounting Type | Flange Mount |
| Output Type | NPN |
| Response Time | 2 seconds |
| Specific Uses For Product | Temperature |
| UPC | 028851152846 |
| Global Trade Identification Number | 00028851152846 |
| Manufacturer | BOSCH |
| Model | Oxygen Sensor |
| Item Weight | 2.4 ounces |
| Product Dimensions | 2.2 x 1.97 x 5.83 inches |
| Item model number | F00HL00111 |
| Is Discontinued By Manufacturer | No |
| Exterior | Machined |
| Manufacturer Part Number | 15284 |
| OEM Part Number | 8125731670 |
I**E
One-Hour to Replace, Works Fine
Replacement was not too hard. I watched a few YouTube videos first. It's not complicated. On my driveway, I drove the vehicle up on my oil change ramps to give me room to get underneath the vehicle. I blocked the tires and put jack stands in place, for safety. I followed the YouTube instructions to locate and disconnect the plastic connector plug. I used a large adjustable end wrench to loosen and remove the sensor from the exhaust pipe. This O2 sensor came with the anti-seize lubricant already applied. No need to buy any. It took me about an hour, but I work slowly.
B**I
Direct replacement 2004 Chevrolet Suburban Z71
This O2 sensor fixed my motor rough running,poor fuel economy issues. Purchased a code scanner here on Amazon to diagnose, I recommend this easy replacement Bosch part to fix your Chevrolet 5.3
R**N
Cleared p0420 code
Fit my 04 Silverado 1500 perfectly and cleared my p0420 cel. If you have the same code wait like a week after you clear, it the cel might come back but mine went away again after a few days. Cheaper the. Anywhere else also. I did order a 2nd one and it came looking slightly used not as good as the first one the cap was off as well
B**P
Worked
Worked great
J**N
2003 tahoe works well
Works well in my 03 tahoe engine in my 64 c10
S**Y
This worked in a 2004 Chevy avalanche
This solved my check engine light for oxygen sensor bank 1 sensor 1 ( driver’s side, upstream, before the catalytic converter). I’ll update if it does not last long, but seemed like quality. The oxygen sensors are tough to get out, so if you run into that, search for tips and tricks removing oxygen sensors. What worked for me was pb blaster and cutting the wire so that I could put a 22 mm or 7/8 socket on the sensor. Or if I had enough room using a wrench and you link up a second wrench on the end to give you more length and leverage. Look for those tips and tricks and you’ll get it done.
B**O
Best o2 sensor
Came very quick , looked and fit great . Functions the way it should . Good deal .
N**Y
Working great for 5 months!
Replaced my absolutely mangled downstream sensor on the Bank 1 of the '04 Escalade. Very firm and solid construction, nothing about this sensor feels cheap! Fully recommend it for any Downstream replacement. Had to buy a more pricey Delphi sensor for my Upstream, because this product isn't available for the Upstream on Amazon.Currently purchasing my 2nd sensor, as the OEM Bank 2 sensors have finally bit the bullet after 20 years. I have a good feeling these new sensors will last just as long.
Trustpilot
2 weeks ago
2 weeks ago
