Mini Keg Co2 Regulator 0-60 PSI Portable Corny Keg Regulator | No Leakage, 16g Co2 Cartridge Compatible, Ball Lock Quick Disconnect, fits Corny Keg Mini Keg Growler for Brewing Carbonation

Works great, but do not use 24 gram CO2 cartridges, only 16 gram. I use it for forced carbonation and serving hard cider in 3 gal kegs. Works great and fits in my spare fridge nicely. First one failed after a year because (I'm very sure) I used 24g to force carbonate and 16g to store and serve. Switched to only 16g now. Great little units for the price!

The construction on this item is exceptional. It comes with all the needed attractions and attachments. The valve assembly regulator is well-made. It can meter the pressure down to five psi which is what I used to deliver beer out of a Corny keg. In the future, it is a back up CO2 source that I will have on all of our kegerators in the future.

Works great. It seems a bit fragile to me, but has worked flawlessly for 10 gal of beer. I’m just very careful. No leaks after connecting 6 CO2 mini bottles.

I used this with a 5-gallon Corny/Cornelius keg that I had filled with commercial beer for a birthday party where alcohol discretion was required. After filling, I purged the keg of oxygen with CO2 and pressurized it to about 20 PSI overnight. The next day, when it was time to serve, I connected this mini regulator, vented the keg down to around 8 PSI, then slowly increased pressure until the needle just passed 8 PSI before backing it off slightly. (I found 8–10 PSI to be the sweet spot to minimize foam.) The regulator performed flawlessly throughout the entire event. We dispensed about 4.5 gallons of beer using only three or four 16g food-safe CO2 canisters, also purchased on Amazon. While there’s some initial setup involved, once dialed in, I found the regulator reliable and convenient. It saved me the hassle of lugging around a full-size CO2 tank and kept things nice and discrete. To proactively prevent any leaks, I removed all fittings and wrapped them in thread-sealing tape- highly recommended for peace of mind.

This works great to repressurize my mini keg. No complaints.

Fit perfect , well built and for a great price

Update 6/13/24 I was wrong on how long it would hold pressure. It did have a leak somewhere because after 2.5 weeks "shut off" it was empty. I am going to try Teflon tape next time maybe that will hold longer. Original-I had issues screwing the ball lock to the separate attachments(both gold), I don't see why it had to have an adapter to attach to the ball lock. Initially connecting these parts it continued to swivel and leak air between the two gold connection points. Once I figured out how to tighten it down it stopped leaking at this point and did not swivel freely. The pressure gauge who knows if its accurate or not but if it's for a weekend one gallon keg then who cares, dial it down and/or get a flow restricting tap. Seem to hold air the last two weeks with no issues

Works great. Smooth adjustment of the pressure. I use it with a paintball C02 tank to feed small homebrew kegs. So I need 5 or 10psi. The gauge on this works smoothly also. The prior 'mini regulator' I had was very finicky, the gauge was junk (I'd replaced it with a bigger gauge) and it went from nothing to way over pressure with a very very very small turn. So far, this one seems to work correctly. I'm very encouraged. I'm hoping not to have to buy a two stage regulator as they're larger and more expensive.