Thermalright Peerless Assassin 120 SE CPU Cooler, 6 Heat Pipes AGHP Technology, Dual 120mm PWM Fans, 1550RPM Speed, for AMD:AM4 AM5/Intel LGA 1700/1150/1151/1200/1851,PC Cooler

Installed this cooler in my PC, and it’s honestly one of the best air coolers I’ve used. Temps dropped significantly compared to my old one, and it’s super quiet even under load. Installation was straightforward, and the ARGB lighting looks clean inside the case. Build quality feels premium, and the fans are smooth and silent. For its price, it’s an amazing value for keeping your CPU cool. It works perfectly as it is compatible with my R9 5900 XT. It has lasted around 2 years since I bought it and looks nice!

I was skeptical, but this cooler is keeping my Ryzen 9 9900X cool. It is operating within normal temperature ranges. At max load it hit 170f (76c). Max temp for my processor is 203f (95c), so plenty of room. Installation was simple enough, use the included mounting hardware for your processor, apply paste, mount the heatsink, then clip the fans on the heatsink. What I really liked was not having to use screws with the fans. What isn't apparent until you look closer at the diagram is that one fan goes between the heatsinks and the other on the right side. Both fans point to the rear across the heatsinks (see the diagram as it is clear) where the hot air is pulled out by the rear case fan(s). The unit fits exactly as it should on the motherboard. The fans are quiet and do the job. The paste being used is Corsair XTM60, which I've had good results with both on other CPU and GPU (I repasted my old GTX 1070). The case I'm using is a Corsair 5000D, which I picked up as an open box at (the most popular computer retail store). I have three fans in the front pulling in air, two on the top above the motherboard pulling in air, and one exit fan in the rear. I may adjust the fan configuration later, but it is doing fine. Getting back to the cooler, I am pleasantly surprised with its performance. For the price you can't beat it, and it supports both Intel and AMD processors. It is a good product. I would definitely recommend it.

I recently installed the Peerless Assassin 120 SE ARGB in my build and I’m extremely pleased with the results. A few highlight points: With 6 heat-pipes and a dual-tower heatsink, this cooler handles high thermal loads surprisingly well for the price. It supports both Intel (LGA 115x/1200/1700) and AMD (AM4/AM5) sockets out of the box — easy to integrate into different systems. It is impressively quiet. According to the official spec the noise level tops out at ~25.6 dBA, which means minimal fan noise in daily use. The ARGB lighting is a nice bonus for anyone who cares about aesthetics, and it does not seem to compromise performance. My experience in use: Installation was straightforward (with the back-plate and mounting brackets included). After setup I noticed lower idle and load temperatures vs the stock cooler, and the system remained quiet even under sustained load. It also had good clearance around my RAM slots and GPU (always good to check fit in your case). In terms of value vs performance, this cooler really stands out. Minor note: You’ll want to check your case’s CPU cooler clearance, the heatsink is ~155mm tall. Also, if you’re doing extreme overclocking or very high-end CPUs at 300 W+ loads, this may not quite match the very top-tier 280/360mm liquid-coolers, but for most builds it gives excellent bang for the buck. Bottom line: If you’re looking for a high-performance air cooler that doesn’t break the bank, the Peerless Assassin 120 SE ARGB is hard to beat. Highly recommended.

Got the kids' computer running cool & quiet. Excellent value for the money & performance. Fit, mountability, quality are great. Be patient with install & use top end paste. Worth it. Looks good too.

Keeps my i7 very cool. 25 to 27° C idling & plenty of headroom under load. Cheap but very effective cooler. Installation was tricky due to it being awkward to get paste on because of it's size & shoe. Also screws have to be turned a lot before contact so you have to screw fast to keep the paste from getting tacky. Was certainly doable though. Fans are very quiet, especially at idle. Downside is it's big, very big. You need small memory or you'd have to put a fan on the back side to use bigger memory sticks. Maybe not for a novice but worth a shot.

I’m using this as the cooler for my Ryzen 7 5800X and it performs quite well! I’m honestly impressed. It runs at around 27° C at medium to low usage, and only gets up to around 60° at full blast. It’s also very quiet. Installation was pretty straightforward. Overall great cooler.

Couldn't be happier so far with the Thermalright Peerless Assassin 120 SE. I replaced a low-profile Noctua cooler with this, and it was a huge upgrade for my mid-tower case. To be fair, the low-profile design of my old cooler wasn't a good match for my setup, but the difference is still night and day. The Thermalright was simple to install, super affordable, and even came with a decent tube of thermal paste. On my Ryzen 7 5700X3D and MSI B550M motherboard, my temps are great: Idle: ~40°C Under Load: ~71°C This is with two case fans in an 18°C room. Using the default fan profile, it's virtually silent at idle and hits a very reasonable noise level under load. Great job with this one Thermalright .

One of the best coolers i ever bought. Super easy and simple to install, plenty of options for fan placement/orientation. Currently running this on an 3900x and keeps her cool in the 40s when idle. If you have the clearance for a decent size tower cooler, highly recommend. Cost to performance, i woudlnt look at high cost coolers when this thing does the job. Going to be replacing my aging 240mm NZXT AIO from a 5800x3d with this identical cooler here in the very near future. Fit, finish and looks, top notch and decently attractive in a case.

Reseña del 310824. Para poder instalar es muy útil el video que esta dentro de la descripción del producto. Es un sistema de ventilación grande, en mi caso quedo justo (quizás hasta apretando) las memorias ram, por lo que te recomiendo tener esto en cuenta al momento de armar tu set. Ten en cuenta que debes revisar la posición del cableado a conectar para que te sea mas fácil conectarlo a tu tarjeta madre y que al momento de ensamblar esto te ayudará que los cables no estorben a los ventiladores.

I've recently upgraded my budget gaming laptop's CPU to Ryzen 7 5800X, fitting in a Mini ATX casing and basic neutral airflow. Have tried to recycle the previously Ryzen 5's stock fan, but the temperature hit 90 Celsius a couple of times and shutdown my PC. Had to resort to eco mode for awhile until I came across the raving review of TPA120SE. Reverting to normal mode (non-Eco) and installing TPA120SE, the same high intensity game doesn't cause the temperature to spike above 70 Celsius, usually floating between 43 - 65 Celsius. And the price point is incredible for the value it delivers!

CPU Fan is strong and powerful. Very Quiet which is a key point.

مروحة تبريد ممتازة تعمل %100

Awesome