BOSCH 15308 Premium OE Fitment Oxygen Sensor - Compatible with Select Dodge Dakota, Durango, Ram 1500, Ram 2500, Ram 3500, Viper

Oil leak from old sensor. O ring with replacement Bosch sensor felt good quality. Oil leak solved. Engine runs smoothly.

Fits mk2 focus st just make sure to put some rag over the alternator to stop any drips when removing the old sensor

My Volvo S40 2.4i (2004) had a check engine warning light come up, at first it was intermittent but as the engine was running fine I left it alone. After a while the engine started stuttering & died, luckily I had an OBD2 Bluetooth adapter/reader that allowed me to connect to my android smart phone & scan for errors, which it did (PO129 Fuel Pressure Low Input)I Googled the fault & found that I needed a new Fuel Pressure Sensor, I shopped around & much to my surprise I found it here on Amazon & at a really good price. Combine that with Amazon's Prime Service I had it the next day, Chuffed!!If you look around (Google it!) I found some instructions on how to swap out the sensors in under 45 mins (I have a very basic knowledge of mechanics, I'm more of a techie!)Overall I'm very happy with the service provided & even happier to get the issue on my car sorted cheaply & easily!Keith.

I recommend

If you get an unusual fan type symbol popping up on your display, it could mean that the temperature sensor is no longer in spec. That's what happened to me, and this unit solved the problem.

You guys are a life savour ! I was on holiday 400 miles from Home when my EML light came on with error p0193 fuel pressure rail sensor ... got this delivered to a local Amazon locker by where I was staying , swapped the part in about 15 mins and the cars good as new ... Ford direct wanted £98!! Thankyou so muchCar - Focus st 2.5 ( 2007)

Thread stripped with ease, and little to now force when fitting. Very poor quality

Good spare

Very satisfied

Worked as it should

This fit my 2004 Prius great. Quality was solid, included the seal grease that came with it, and the fits were perfect. The larger seal was different from the original part that I removed, but this one was equally high quality. It was stiffer, so a bit of a struggle to get into place, even with the car on the lift and lots of room for tools to assist. Plan for a few extra minutes of potential frustration, but know that it will fit with some prodding.If you’re installing this in a 2004 Prius, with the help of YouTube, note:* This is the **downsteam** 02 sensor that is located under the front passenger floorboard area, NOT the upstream 02 sensor located under the hood.* The carpet clip you need to pop in the 2004 Prius to access the interior half of this part is different than in many videos. There are **two** clips to pop out, not a single one that holds both the console AND the carpet in place, as in many videos. Pull the center console out enough to actually look for it vs. just going by feel where it appears to be in videos and you’ll save yourself some time and confusion. Don’t worry, I had my whole head right in there and the console flexed just fine.All in, this was an easy fix even for my VERY inexperienced self, who can only do the most basic maintenance myself. I had help, but this was certainly doable for a newbie. You won’t need an 02 sensor wrench so save yourself the money, but do have a can of rust spray on hand in case the original part is rusted in place, It likely is!

Fit perfectly, did the job.

The sensor was very easy to install with the right tools of course. The connector was just exactly like the original. Works perfectly fine.