CERAKOTE® Ceramic Headlight Restoration Kit – Guaranteed To Last As Long As You Own Your Vehicle – Brings Headlights back to Like New Condition - 3 Easy Steps - No Power Tools Required

Great product. I used this on a 2010 Toyota Yaris headlights. The left side headlight had yellowed from sun exposure, as a result of being ungaraged for 16 years. The right side looked ok. I followed the instructions carefully for the left side headlight and found it took less than 30 minutes to prep and apply. The end result was that the light looked almost as clear as new. However it was so good that it made the right side look old by comparison, and so I then treated the other side too! This does also mean both headlights now have UV protection and should have future aging delayed on both sides. The quantity of chemical on the wipes is ample for two headlights, I also had sufficient excess to apply to the Plexiglas screen of my motorcycle. The box contained a QR code for a YouTube tutorial video that is essential to watch. The process isn’t difficult but it identifies where water must be used and where the lights must be meticulously dry. This has made a great improvement to the aesthetics of the car and is cheap and easy.

Amazing product. Has a very easy 3 stage application. Stage 1 is just wiping the lens with a chemical pad to remove the oxidation - Very effective, i could have stopped here as lens already looking good. As i had minimal scratches, went straight to the 3000 grit pad - 10 minutes max of rubbing. Dried and added the ceramic on the pad. Like magic, headlight looks brand new - incredible! I know it will last a year or 2 only. But Car will now fly through MOT and saves me £600 for replacements - very happy!

Excellent product! Great results and very easy to apply. After last year disastrous product, which was one of those laborious and tedious sanding and changing sand papering my headlights. I was committed to find much a better product. So I went for this CERAKOTE Ceramic Headlights restoring product and needles to say, I was not disappointed. The process is very easy. 1 You wash and dry your headlights 2 You apply the Step 1 wipes on your headlights and then rinse. 3 You sand paper your headlights for about 3 mins each, with only 2 disks, 2000 and 3000. The dry thoroughly. 4 You apply the step 3 wipes and let dry for 1hr. ALL DONE!. YOUR HEADLIGHTS NOW LOOK LIKE NEW!!! 4 for

This worked extremely well. The ceramic coating leaves a shiny clear surface that is very impressive. The instructions are good - make sure you follow them carefully. One important instruction to follow - once the ceramic coating is applied you need to let it dry for an hour - do not get it wet as it will likely ruin all your good work! I would thoroughly recommend this product.

Great item, does exactly what it states and restored my headlights back to their former glory. Very easy to use and no power tools were needed. Would definitely use again.

Initial impressions are great Instructions are easy to follow and the kit almost everything you need to complete the job, but I'm not sure how long the results will last and what I'll be left with in a few months time. My headlights were very badly damaged by the sun, all yellow and lots of water staining and fog. You start with wiping the lights down with a chemical covered anti oxiden wipe. You get 8 of them in the pack, 4 for each light. You are warned to remove the chemicals from any bodywork as soon as you can... this is where the kit would benefit from including a roll of masking take or something to protect the area around the light. I ended up using my own tape to cover the surrounding area before starting. The wipes do a fantastic job on their own. But to get the best results, you need to carry out the other steps. Step 2 is to sand the lights with the provided wet and dry sand paper and sanding block. 2000 and 3000 grit discs are included. You get 2 x 2000 and 2 x 3000, one of each for each light. This takes time to do right and not damage the lights. This is the hardest part. Take your time and don't apply too much pressure. After multiple passes you will get a good result. Once sanding is done, you will be left with headlight that look quite foggy from the micro scratches after sanding... and you might be worried about what you've just done! Steps 3 solves that. Apply the last wipe, you get two of them, one for each light. Once this wipe of chemical has been applied the lights will look immaculate. My only concern is how long until this chemical washes off/needs a top up? You only get two wipes in the pack. Say it lasts six months, how can I top it up? They look great for now but we will see how well it holds up over time. I have attached a before so you can see the results. This was half way though the process with one light finished and other untouched. You can see how well it's come out. Wholly recommended, but buy some masking tape to mask up and save your paint work from scratches and chemical contamination. And be prepared to need to find something to refinish them again in a few months when the finishing coat weathers off.

The headlights on my old car were looking somewhat worse for wear. Gave this restoration kit a go and I couldn’t believe the results. Headlights are now looking just as good as when the car was driven off the forecourt 18 years ago. As far as the application process went, this was simple and straight forward with easy to understand instructions and accompanying YouTube video. At the price I paid (£17.95) this is an absolute bargain. Highly recommended.

This is a great product and really easy to use. Simple instructions and would definitely recommend viewing the short video instructions via the QR code link in the box. I used it on my 14 year old Mazda and the before and after photos show how well it came out. I took my time doing the job and both headlights done in about 60 minutes.

Nice and good

This is a simple straightforward way to turn your yellow headlights back to clear. You can do the full process in under 2 hours or even faster if you have a way to dry the headlight after the scrub. It lasts in the Texas sun and heat for over 2 years without any signs of wear. Application is straightforward and easy with instructions and a QR code for video. After scrubbing allow it to dry fully. For the streak-free shine, make sure you use all the #1 pouches.

I used this headlight restoration kit and the results were exactly as mentioned in the product description. My car’s headlights were yellow and dull, but after following the steps in the kit, they became clear and bright again. The process was simple, and all the required materials were included. The final finish looks almost like new, and the light output has improved a lot. Definitely worth the money and highly recommended for anyone wanting to restore their headlights without replacing them.

Ottimo prodotto, in circa un ora ho rinnovato entrambi i fari della macchina di mia moglie. Basta seguire attentamente le istruzioni e sono sicuro che otterrete il risultato sperato (attenzione però, le istruzioni sono in inglese).

Works.