Genmitsu CNC ABS Dust Shoe for CNC Machines with a 52mm Diameter Motor, fits Most 300W-500W Spindle Motors, Hose Adapter Outer Diameter 38mm (1.5″), Transparent

Nice

Keeping exposed ways and lead screws clean is critical for longevity of service. I recently purchased the Lunyee 3018 Pro Max and this shoe fits perfectly. I don't think I'll ever use the long bristle option but the short bristle option is perfect, my end mills sit about .2" below the bristles. I repurposed an old vacuum cleaner which delivers high pressure to the shoe and I have ZERO debris escape from it. I see videos here wherein the bristles are dragging the project piece which is not correct. My 30° V-bits are very short so I fabricated a plate to redirect the airflow so I use no bristles at all. I highly recommend this device, or whatever you can find to fit correctly, to keep debris contained.

Very well made and fit perfectly on my CNC just as presented

cumplio espectativas

The bristles on the 40mm brush are either too long, or two close together. I used it with a 1/4 inch end mill and the bristles became tangled in the bit and the entire bottom two pieces were shattered and thrown everywhere. The 20 mm brush worked perfectly though with 1/8 inch bits.

I have a Fox Alien 4040XE with the 300w spindle and it fits really well! I didn't have the dust shoes attached properly at first and customer service got back to me right away (on the holiday weekend)! I have a vacuum with a 1 1/4" hose and it fits perfect! If you have a bigger hose you may want to reduce it.

The dust shoe fit perfectly on my 4030 PreVer XL. The shoe picks up all the sawdust from my machine and keeps the dust in the area to almost nil. I really like the magnetic coupling of the brush assembly. It comes off very easily to check Z height and when it is attached if does not move a bit. I would recommend this to anyone with a 52mm spindle motor to consider this dust shoe.

it works rall good

よかったが問題が取り付け方向を変えるとスピンドルのＺ方向が動作しなくるネジを90度変えて解決掃除機を繋いで解決またホースの挿入口が割れやすいのでバンドで固定と良いと思います

Macht genau das was es soll Staub absaugenTop Verarbeitung und sehr passgenau

Ottimo e bel fatto

ca fait exactement comme décrit.. il y a un léger espace entre les aimants pour ne pas avoir à forcer pour séparer les éléments..j’ai connecté mon aspirateur "Dewal" (modèle DCV581) avec un peu d’adaptation et j’en suis satisfait.. l’aspirateur a déjà un boyau de 1 1/4", avec une rallonge "Dyson Gen 5" et un bout de raccord en PVC, c’est simple..je suis surpris du manque d’information sur le raccordement à l’aspirateur, alors maintenant vous savez un minimum.. je laisserai une photo plus tard pour mieux voir..

Used it on my upgraded Genmitsu 3040 (was 3018) prover 2.0 cnc. Very useful product.