Replacement Uncut Ignition Chipped Key Transponder Blank Compatible with Dot Chip
Product ID: 413549221
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Slovakia.
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions. Review: Que si k - Está bien si me sirvió para una vans highlander Review: Sounds silly, But it WORKS! - This is a great solution for getting another chip key. (CAUTION: This will only work if you have one original “master” programmed key (we keep one in a safe) this worked on my 2005 Highlander. I have not tried it with another replacement key). My solution was to go and buy a plain cut door key, open the plastic top and take out the metal key, do the same for this key, it snaps open. Be careful not to lose the gray chip, they can fall out. use a drill to clean the hole where the key is attached and remove it. Cut or grind the cut key so it will fit into the same space (it is a straight shank) I used a little super glue and then snapped the key case back, ensuring the gray chip was in. once done, checked that the key worked in the door and ignition for motion. It should turn the engine over. Then I used this procedure to program the key: YES, it sounds silly, BUT IT DOES WORK!! 1. Open the driver’s door, all other doors closed but unlocked. 2. Without turning it, Insert master key in/out of ignition 5 times, leave key in on 5th insert. 3. Now close/open the driver door 6 times, leaving the door open the 6th time. 4. Pull out master key, the security light (on the left of the steering wheel in the panel) will light solid (program mode). Immediately insert the unprogrammed key DO NOT TURN. 5. Leave key in ign for 60-80 sec, security lights flashes, when it stops flashing. Remove replacement key. 6. Immediately insert Master key into ignition and turn it to on position, don’t start the car, then off and remove. Done! Now try the new key, the car should start. I had to do it a couple times but it worked and I now have a spare for my daughter’s car.
| ASIN | B00KTHXJHK |
| Best Sellers Rank | #476,778 in Automotive ( See Top 100 in Automotive ) #2,285 in Keyless Entry Systems |
| Brand | KeylessOption |
| Customer Reviews | 4.1 4.1 out of 5 stars (1,445) |
| Date First Available | June 6, 2014 |
| Item Weight | 0.634 ounces |
| Item model number | 8542135864 |
| Manufacturer | KeylessOption |
| Manufacturer Part Number | KPT1636 |
| Product Dimensions | 2 x 0.75 x 4 inches |
| Voltage | 12 volts |
J**N
Que si k
Está bien si me sirvió para una vans highlander
J**N
Sounds silly, But it WORKS!
This is a great solution for getting another chip key. (CAUTION: This will only work if you have one original “master” programmed key (we keep one in a safe) this worked on my 2005 Highlander. I have not tried it with another replacement key). My solution was to go and buy a plain cut door key, open the plastic top and take out the metal key, do the same for this key, it snaps open. Be careful not to lose the gray chip, they can fall out. use a drill to clean the hole where the key is attached and remove it. Cut or grind the cut key so it will fit into the same space (it is a straight shank) I used a little super glue and then snapped the key case back, ensuring the gray chip was in. once done, checked that the key worked in the door and ignition for motion. It should turn the engine over. Then I used this procedure to program the key: YES, it sounds silly, BUT IT DOES WORK!! 1. Open the driver’s door, all other doors closed but unlocked. 2. Without turning it, Insert master key in/out of ignition 5 times, leave key in on 5th insert. 3. Now close/open the driver door 6 times, leaving the door open the 6th time. 4. Pull out master key, the security light (on the left of the steering wheel in the panel) will light solid (program mode). Immediately insert the unprogrammed key DO NOT TURN. 5. Leave key in ign for 60-80 sec, security lights flashes, when it stops flashing. Remove replacement key. 6. Immediately insert Master key into ignition and turn it to on position, don’t start the car, then off and remove. Done! Now try the new key, the car should start. I had to do it a couple times but it worked and I now have a spare for my daughter’s car.
A**R
Bingo!
Great product, once I got it cut and programmed it works flawlessly!
K**R
Excellent value, works great! Had trouble finding a place to cut it but found a solution in the end.
No complaints, works perfectly! Struggled to find a local-shop to cut this and instead found a service called Faster Auto Keys online, which allows you to send in a picture of your current car key along with this key blank. They then cut the key blank based on the image. After receiving the key, I followed a YouTube tutorial to program the chip for my 4Runner, and everything worked flawlessly. After trying and failing to get Home Depot and three different ACE Hardware stores to cut this, I highly recommended Faster Auto Keys.
G**O
Worked well
Works well. Easy to program
Trustpilot
2 months ago
5 days ago