PUTORSEN 3 PC Monitor Stand, Premium Aluminium Ergonomic Articulated Arm Gas Spring for Triple Screens 17-27 Inches, Height Adjustable Tilt Swivel and Desk Mount, Arm Supports 7 kg

Initially this monitor mount seemed good. The problem is each arm has an adjustable screw to set the strength of the arm. You turn it one way for heavy monitors and another for lighters screens. The problem is, after a while the monitors on the left side starts to drop. So I increase the tightness a little each time. Now though the screw is already at a maximum setting and it has started to drop. For the price of this monitor mount, that is very disappointing. In addition to this you have to tighten the bolts behind the screen incredibly tight in order to do them from tilting forward. The product looks good quality, but was unfortunately a disappointment.

Firstly, to explain my current setup, I use two sets of Alex drawers as “legs” and use a LINNMON worktop from IKEA. It is worth noting that before I continue to review the triple monitor stand itself, the LINNMON worktop is made from a honeycomb structure of recycled materials supporting three 24” monitors.This mean that when I used a previous monitor arm, the arm began to sink into the worktop causing a dent, and my monitor to sag. Although I am sure the surface area of the base of the stand, and the underneath clamp is sufficient, for peace of mind, I decided to reinforce the stand under the base, and between the clamp and the worktop with steel plates from B&Q to distribute the weight of the monitors and stand across a wider area.So, picture monitor stand base, steel plate, LINNMON worktop, steel plate, monitor stand clamp. I’m not saying that everyone will need to do this but if you don’t have a thick solid worktop, a bit of extra reinforcement will go a long way in protecting your equipment.Knowing that I wanted to have all three monitors on a single stand to free up space, I found the PUTORSEN triple monitor mount and given the feedback, plus viewing numerous other triple monitor arms, I was unable to find anything that came close to meeting all my requirements.Firstly, having a cable management system that hides nearly 100% of the cable (only [art exposed is at the joints) neatly was a great plus. It uses simple slide mechanisms to remove and add the trays that hold and hide the cables. One thing to note is to be careful when working with the management system as I believe that too much pressure may cause the clips to break (see pictures of the clips)Take your time to read the instructions and you’ll have no problem with assembly but I would highly recommend that when it comes time to install, you have one person at top holding the monitor arm in position, and one person below to either tighten up the clamp, or screw; depending on your setup.The hydraulics of the arms is great as it will allow you to loosen up the required bolt to position the monitor exactly where you want it to be rather than other static monitor arms that tilt slightly. Depending on the size of your monitor, you may have to spend a bit of time tightening the bolts to accommodate the weight of the monitor.One thing that would be nice, but not sure if possible within such a small place would be two options, say smaller than (<) 22 and greater than (>) 22 so the tension in the bolt is adjusted accordingly to support the weight of a specific range of monitor sizes. This is a feature I have seen in a Dell laptop dock and monitor stand combo that works great.I certainly have a lot more space on my desk now and the monitors are at a nice height for me to see clearly.

Brought this as I got 2 new monitors to add to my gaming one. The stand is very sturdy and holds the monitors surprisingly well for what it is. The arm is quite heavy in itself and I recommend you look into the strength and weight of your desk as it is very heavy when holding itself along with three monitors on one anchor point.It comes in parts and assembly using the manual is very straight forward. It has adjustments for most angles and Allen key adjustments to make the hold tighter or looser depending on what you need.Cable management is very easy due to the tracks set down the arms helping control the direction of wires leaving you with a ‘cable less’ setupOverall a quality monitor stand!

Was good until I started to see my right monitor slanted slightly, I am a perfectionist. Once I see something irregular my OCD starts to kick in, I tried my best to level the stand as best as I can but the stand just doesn’t seem to keep the right side monitor in level. I am using 3 27” monitor, Acer Nitros, these are fairly light and weigh in much lower than the limit they put. Fairly disappointed

I love this and don't know why I didn't buy them before. easy to put together once the instructions were sorted as they wasn't very clear. but all in all a great product.