ELEGOO Mercury XS Bundle, Wash and Cure Machine for Large Resin 3D Printed Models, Compatible with Saturn and Mars LCD 3D Printers, with a Handheld UV Lamp

This two machine work great. Since I use water rinseable resin the wash station works great. Water is so much better than isopropyl alcohol. I cannot imagine what it would cost to fill the vat with alcohol. Then one has to deal with something that is highly combustible as isopropyl alcohol. The cure station is also a great product. It works great. it is really easy to use. and cures the risen perfectly. only thing I recommend with this machine it make sure your prints are both clean and dry before you cure them, otherwise you will have a white pasty film on you printed parts.

They share a power cable and at some point I am assuming a surge or something happened because they both stopped working. I am surprised something wasn't built into the transformer / AC/DC converter in the cable to prevent damage to the electronics. The light on the transformer still turns on so we know it's getting power and I tested it as well. Can't return or get a replacement now. It's a shame because the Saturn 2 printer is great. Edit: Customer service helped ship us the replacement motherboard for free to resolve the issue. Taking apart the item was not too difficult and the new motherboard got everything running again.

Bought this after my Anycubic plus didn’t work when it arrived. This Elegoo unit arrived and worked perfectly. In short, I’m very happy with this product and how it works. Controls are easy to use as well. I personally like having separate wash and cure stations so I can always leave the alcohol on the pad, but not everyone has that amount of real estate to give up for two machines vs one machine. Also keep in mind that there is one power cable for BOTH machines. They share it, so they have to be placed very close to each other. I have my curing station facing me and the washing station sideways to that to save a bit of room on my work table. Overall so far, I only have two complaints, but they don’t impact the functionality of the product. First, I was sad to find out that the bases of the machines are all plastic, I was hoping they’d be metal and therefore feel more premium like the Anycubic did. But since I won’t be moving them often it should be fine and they are still sturdy. Secondly, I would have liked a bigger option like Anycubic offers. A larger washing container and a larger curing station as part of a “plus” bundle or something like that would give people with bigger prints more options. But then again, Anycubic doesn’t offer a separate station bundle, nor do they offer a handheld UV lamp and goggles. I haven’t used either of those options yet, but the handheld lamp will definitely be nice to have.

My husband got the resin printer about one month ago and was not using it due to needing this cleaner and dryer, it works great and he loves it the, price was great and it is very easy to use.

I've been FDM 3D printing for years, but recently decided to try the resin. Bought a Saturn3 and wanted a station that I knew would for the largest parts. This does that; both cleaning and cutting. Controls are simple, and work, though the knobs feel cheap. There is little to figure out; press-hold to turn on/off, rotate to set time, press to start. My only complaints are: 1) both stations won't allow you to restart the cure/clean cycle until you power off, and power back on, which then also requires resetting the cycle duration. This is particularly annoying if I simply need to reposition the parts for better coverage, and start again. It's an unnecessary couple of steps. It would be nice if, once the cycle has finished, I could dial a new time and press start without the two additional press-holds. 2) the wire basket and the wire frame holder in the cleaning station don't really "fit" each other. It's not clear to me how they are supposed to fit, but it's pretty obvious that the basket goes into the holder, but they just don't seat correctly. Neither of these are big issues, but it's clear Elegoo didn't really do much in usability design/review before claiming "ship it!".

Excelente producto

Great Transaction, would recommend AAA+++

I have a Saturn 8k printer and was using one of the smaller cleaning combo system that didn't fit half the big prints I made. This is big enough to hold my print and the print bed in the alcohol. The curing side is also big enough to hold the big prints with uv led's under the bottom as well. The only thing I wish they would have done is made it with 2 power supplies. They have one supply that is split for the two, so you can't use them in different places....except my older one is also Elegoo and the power supply is the same kind so I was able to use that with one of them. If you have a bigger format resin printer this is great for those.

Product works great except the curing machine doesn't display the numbers correctly. One side of the number doesn't work and i'm not getting any response from the seller!

Muy buen producto de buena calidad y tamaño, funcional

Melhor compra, pra quem precisa fazer impressão com resina, esse item é indispensável.

Ótimo produto e entrega rápida.

Todo muy bien