Car Cup Holder Expander for Upgraded Dual Cup Holder Compatible with Yeti 14/24/36/46oz Ramblers, Hydro Flasks 32/40oz, Other Large Bottles Mugs in 3.4"-4.0"

It’s a good fit but for a small car and limited car space you’ll find your passenger elbowing it on accident from time to time.

The huge main cup holder dominates the whole area. No one should ever need such a huge holder - you know who you are!But the fixed to the side ring is strong and minimalist, so that is good.Fussy to get it tightened just as the 2nd cup holder gets pointed the way you need it to go.Does the job, but definitely uglifies your car space.

-- FIT IN JEEP WRANGLER: The cup holder fits in only one orientation in a Jeep Wrangler JKU.-- WORKS IN ONLY ONE ORIENTATION: This is the only orientation that will allow the Brake Lever and the Shift Lever to Operate without interference.This orientation can be seen the attached pictures or the open cup holder should be oriented at about 45 degrees on the passenger side where zero if top center.There is still plenty of room on the passenger side so the position of the extended holder is not in the way. -- TWIST LOCK IS STRONG: The twist locking mechanism works well to hold it securely. -- HOLDS LARGE CUPS: The cups Ive chosen in the pics, a large tapered 32 oz Bubba and a tapered 20 oz coffee mug fit well enough to make me believe they would stay in place on a rocky off road. -- WON'T HOLD a 12 oz CAN!: The extra cup holder is only a plastic ring and WILL NOT hold a 12oz can. A much better design would have been to provide a bottom and a rubber gasket to hold different size cans or the same as they did in the center holder. A major oversight IMO and the reason I deduct 1 start.Ill update this review after using it off-road.

I had bought some before and they were flimsy and did not hold the bottle or cup well. These are built heavier and sit in the original car cup holder better than the ones I bought before.

My cup holders in my Toyota Camry are front and rear.The "Dual Cup Holder" placed in either cup holder in the car takes a few tries to figure out where the Three tabs need to go so you can rotate the "Dual Cup Holder" counter clockwise to tighten it down.You need to make sure the Three tabs are on the sides and not having one in the open area at the front or rear of the cup holder in the car. Otherwise it seems sturdy an I can put a Starbucks Venti size cup in the little cup holder on the side. Venti is the large 20 oz drink and it fits low enough in the cup holder so you don't need to worry about it falling out.

Both original cupholders remain fully functional with this expander. You twist the unit to tighten it in the original holder and it can be very tight and secure. In the part that goes down into your original cup holder, there's a slot in the side for a mug handle that needs to be placed at the proper angle so you can reach it and the 3rd / add-on cup holder is fixed so there is some readjusting to get it set up to your liking, and so that it's all out of the way of the gear shifter. The 3rd cup holder is quite large, big enough for a Big Gulp / Supersized beverage or a large water bottle. It is much bigger than a standard travel coffee mug but there are rubber "baffles" inside to take up any extra space, there's a non-skid pad in the bottom, and it's deep enough so even though it's big, a travel mug is secure. I gave 4 stars because it's bulkier than I expected and I'd like more options to have the 3rd holder swing into the position I want but I'm confident that my coffee cup will not tip over or fall out.

Works well. Fits my VW Tiguan. Now I wish I could add an optional tray but I haven't seen if this was available without buying a whole new cup holder.

This think is awesome. Very solid after the installation. I now have 3 cupholders in the console and can fit multiple drinks at the same time. The addition of a small cup holder on the side is a great idea and works well. Both of us can enjoy a cup of coffee now and don't have to remove the water bottle to hold the cups.I tried multiple different cupholder expanders and this one is by far the best one of them all. It's a bit more expensive than others but well worth it. I installed it once and it just stayed in. It solves the problem of being able to stand up a thick 40oz metal water bottle that would not fit in a regular cupholder. Also fits my kid's sports bottle so it no longer ends up rolling around on the floor after a sudden stop.

Buen material en relación costo... Se adapta a botellas grandes, excelente producto

It is good for our purpose. I wish it would be larger on the extended side. All and all. It is good

Finally found a cup expander that will hold my biggest Yeti cup and large jug. The system at the bottom that sort of rachets tight, by turning, keeps the cup holder in place, and no chance to fall over. The swivel action allows you to position it in a way that it doesn't get in the way of the shifter. So glad to have found this item. Def recommend this item. I bit more expensive, but will do the job for oversize water bottles etc.

Me encantó, de material aparentemente resistente. El portavasos adicional que tiene en el brazo también resulta útil , me habría gustado que fuera 1 o 2 cm más largo el aditamento que se inserta al portavasos lo cual le daría un extra de estabilidad (no llego al fondo de mi portavasos original del carro ) fiera de eso no le cambiaría nada .

I did like the look and functionality of this item when I first received it. It was perfect for my 40oz S'well water bottle, and exactly what the product in question is advertised to hold. Less than a week after I began using it, it snapped clear off its base... spilling an entire 1.5L of water in the passenger seat where my Airpods, phone, wallet and DSLR camera were sitting. I do not recommend this item at all.