Car Remote Starter Kit for Honda Accord (2008-2012) | Key Blade Vehicles Only | Plug & Play Install | Zero Wire Splicing | Use Your OEM Key Fob | DIY System

It's a great addition to your car. It wasn't that hard to install either. I was able to run the cables under the pull down handle and close everything without any issues. I connected the cables to the car first after watching the video and then used the instructions to program it. It was easy peezy lemon squeezy! Lol.

Truly was plug and play. If you can read at a 5th grade level and can follow instructions, simple installation.Disclaimer for my box module. It states in the booklet to press and hold the program button, then plug the 20 pin black connector and wait for a red light to flash before releasing the prog button. The red light never worked or flashed on my module. Regardless, I followed the steps, waiting for the seconds in between even without the red light flashing, and the program worked just the same. The green light did flash during the steps it was called out in. Works fine with the original FOB.

Love that I can warm the car up before I go. Easy peasey install. Takes more time to tuck excess wire up and out of the way than the actual install of the module. Love getting into a cool car in the summer and a warm one in the winter. Worth the money to me.

Remote start was an easy plug and play install and works AMAZING for the fraction of a cost the shops wanted to charge. THANK YOU

Easy to installWorks great

Great product. It saves me time and keeps me comfortable in any season. In the summer, I don’t have to sit in a hot car I just turn it on remotely and let it cool down. In the winter, it’s just as helpful because I can warm up the car before getting in. Overall, it makes my daily routine easier and way more comfortable.

I bought this remote start kit for my wife’s car for Valentine’s Day because:A). The priceB). The reviewsC). Plug and play installation,and I was not disappointed on any point!! This was a simple installation on our 2010 Honda Accord LX-P. The directions were simple and very precise. Installation was a breeze IF you read the instructions provided and have some amount of mechanical ability. I’m no certified mechanic by any means but I do my own automotive maintenance on all my vehicles because I enjoy doing things on my own. Plus it’s a lot less expensive if you can do it yourself. Programming the module was a breeze if you just read the instructions and do them step by step. Worked the first time with no issues. The only drawback, which has absolutely nothing to do with Start-X, is that you need to make sure that you turn on the defroster and fan with heat BEFORE you shut the car off in the evenings so that you will have defrosted windows the next morning. But I see that as very minimal and well worth the extra “effort”……. Thanks Start-X for a great product that does what it says it does!

Everything functions well. The problem I have is that as every review says, putting it all back together sucks big time. I take a star off because this company made this kit for these vehicles, and even made a video on how to install, but doesn’t show much of anything about putting it back together…and none of the reviews offer any hints either, so I’m gonna try and change that!Closing up tips:1. Make sure you check out the video via the QR code on the cover of the manual, I didn’t see it until I was almost done. Taking down the big trim piece beneath the steering wheel is NOT in the paper instructions but is in the video, and helps a ton.2. The problem with closing up is that the main ignition plug is massive and has like 1” of slack in its cord, so you’re effectively putting a big chunk of plastic into a space that wasn’t designed for a big chunk of plastic.3. They don’t say anything about where to secure the unit, they (and my fellow reviewers) just say “Do it!”, so I’ll try and actually be helpful :). If you are sitting in the drivers seat, and the big trim piece from Tip #1 is removed, there’s a nice open area to the left. It is to the top right of the fuse box, behind the plastic trim. I modified the styrofoam webbing the box came with to fit it onto the box with the wires plugged in, then I zip tied it around its whole body to the aluminum piece in the space I mentioned. The foam will stop it from rattling :)4. Closing up: the video says to run the wires beneath the steering wheel lever, but that some vehicles work better if it goes above the lever- YOU MADE THE VIDEO AND THE KIT FOR A SPECIFIC FAMILY OF VEHICLES, JUST GIVE US THE ANSWER! …anyways in my 2011 accord, I HAD to go under or else the lever can’t close correctly.5. Putting the lower column piece in is a lot easier with the bottom big trim piece still removed. Once you get the lower column piece over the lever, your goal is to align the furthest back (away from the driver) screw, because once you have this one in, it’ll hold said giant plastic plug out of the way. I used a bit of electrical tape to tape my screw to my screwdriver so I could use one hand and a flash light to push the trim piece until it lined up with the hole (use another hand to push the wires out of the way through the lever hole if needed). Once you have it lined up with the hole, hold that thing in place with your left hand, and screw it in with your right. Do the same steps with the other screws, which still take effort but not as much as the first. Once all 3 screws are in, the top of the column should snap right down, and then you can put the large trim piece back in. For the large trim piece, you’ll have to push/lift it up for the clips to line up with the holes, then just push it forward and you’ll hear it click into place. Give it a couple love taps with your palm across the top and bottom to ensure they’re all snapped in.I really hope this helps, because it wouldn’t be so dang hard if anyone would just share some tips instead of just complaining (though the fault is ultimately on the manufacturer for poor instructions).

Great product, with good enough instructions for the 15-year old, who installed it

It was nice easy to installed for honda accord 2009. Nice product follow the intructions and its done perfectly.

Works great, took about 20 minutes to install in total (car pulled apart, connected, wires routed and reassembled). No issues. 👍🏽

s instale bien pour honda accord 2010 3,5 litre, tous simple, facile

Easy install. Works great. All you need is a #2 phillips to install.