AUTOSAVER88 Headlight Assembly Compatible with Chevy 2007-2013 Silverado 1500/07-14 Silverado 2500 HD 3500 HD Pickup Head Light Replacement Headlamp Pair Chromed Housing Amber Reflector Clear Lens

First off, let me start with the fact that these lights are great for under $100. Are they OEM quality? No, but for the price they are great with some simple mods.Many other reviewers mention condensation in them. I didn't want to risk that so as soon as I pulled them out of the box I put clear silicone all the way around where the lens meets the housing, making sure to use a toothpick to get it down into where the plastic clips are.Once I installed them I had the same issue as another reviewer. Both driver and passenger lights tend to shine to the right, and my driver side light was shining higher than it should. The little adjustment knobs didn't do a thing, no light movement whatsoever. In my case, I found that the mount on the bottom of the light was not fully pushed in. Once I loosened it, pushed the housing in, and tightened it while holding some pressure on it, the light was much closer to the height it was supposed to be. To fix the driver side from shining too far right, I simply pulled the top left mounting screw out, and loosened the top right one. Then I used a couple washers to shim behind the left mounting screw.Those simple mods got my lights to pretty close to where they're supposed to be shining, with no condensation issues. For under $100 I'm very happy with them!

Easy to install. Fit great. Looks great.

They are bright and are a perfect size! They went in easy and made getting new headlights a breeze!

So far these housing have met my expectations. As far as light output and looks go. I do have a few complaints but I also understand "you get what you pay for". So I will continue to run these till I find something more modern that fits my taste with a better build quality. (When I have some deeper pockets). I'm not bashing these guys by any means. I got what I expected, for what I paid. This review is more so to let the next buyer know what to expect when purchasing these housings. The overall construction and feel of these housings compared to OEM is super cheap plastic.My fist issue was with the mounting hole for the lower HI beams wasn't properly cut to the shape of the Fins on the harness and it took quite alot of work to get the bulb seated properly and even then it was still loose in the housing on both of them. I was able to resolve this with some clever ziptie placements on the wire harnesses. My second issue is the placement of the adjustment screw being at the back of the damn headlight where you cant reach it. Unlike OEM where it is on top. So that when adjusting your beams. You dont have to pull the damn things in and out 50 times.My third and final issue is with "fit and finish". At a distance they look awsome! But upclose they hangout in some spots and are pulled in in other spots. I did have to shim them in a couple of spots to get the beams to line up correctly "left to right"So overall despite my complaints these headlight housings are doing there job "well" the're super clear, they look great (at a distance), I can finally see at night and so far no moisture in the Lenses. For a reasonable price, I'm happy with them. 2008 silverado 1500

I purchased these assemblies in March of 2020 for my 2008 Silverado. The originals lasted 11yrs, before the road debris haze was just too bad to ignore. I purchased a set from another company on Amazon, and they only lasted a year before they yellowed severely. This was my second set of aftermarket assemblies, and they only lasted 2yrs. They are yellowing, the wiring harness is failing, and no bulb ever fit the housings perfectly. The bulb not fitting correctly, made the reflection of the light shine heavily to the right...can't adjust poorly designed case/reflection design. So, they did look great out of the box and upon initial installation, but I paid $155 for the pair, little under half of what OEM cost, now, 2yrs later, I'll be buying OEM for $330 (pair). The math is pretty simple, 2yrs for $155, or 11yrs(?) for $330. I don't know...you can make up your own mind. I'll try to add pictures tomorrow.

These installed easily, fit well, and looked great. Took some getting used to - I didn't realize just how bad the old lights were, and these had a very sharp horizon line compared to the diffused horizon of the old hazed out lights. Unfortunately, my truck was totaled just two weeks after installation, so I can't say how well they hold up or if they resist water.

Looks good easy to install BUT they fog up on the inside Don’t believe the lenses will stay clear for very long

I have read the reviews and I see there is a problem with fogging, so I bought a tube of black Permatex and sealed any part of the lens that mated with the housing that looked suspect. My initial inspection I did not see any areas that lacked sealant but did not want to take the chance. so far so good and no fogging even after dousing with water from every direction.If this changes I will update.Installation was easy. One downside is the headlamp adjustment is in a tight spot in the back of housing, not at the top like the OEM. No big deal, a little inconvenience for the time it took to adjust the lights.I am running LED lights so much brighter so pointed my lamps down a bit more compared to stock setting with halogen lights.10/02/2020 UpdateI have driven through heavy rain on highway that was so heavy windshield wipers were on fastest speed and I could not go over 50 MPH. No fogging at all.

They are nice looking headlights.There are a couple manufacturing faults.1st set 1 light had the low beam light deflector off on arrival. Managed to super glue back on. 2nd deflector on other light fell off within 1 year rendering the lens useless as the bulb was blinding other drivers.2nd set Passenger lens fogged and remained fogged after 1 week.Trying 3rd set..Will update...

Installed these on a co-workers 2008 Chev Silverado. Install was easy, everything lined up just like the factory housings, and these seem to be well made. So far so good, no moisture inside and they look great.

I did read other comments. Silicone around the edges and let set over night and you shouldn't have any moisture build up inside. Put LED bulbs in and they are awesome.

Good product

great price