FREENOVE 5 Inch Touchscreen Monitor for Raspberry Pi 5 4 B 3 B+ A+, 800x480 Pixel IPS Display, 5-Point Touch Capacitive Screen, Driver-Free MIPI DSI Port

Many of my IOT solutions don't require a monitor in their final state but it is really nice to have one handy and non-combersome during development or even as a nice add on to a product where a monitor isn't an absolute necessity. The resolution is good especially for the price point. The color is pretty good but may be better if your eyesight isn't as poor as mine. The power supply is adequate and the unit worked great right out of the box. Due primarily to the reasonible cost, these are also perfect for providing a complete and super convenient system for trainees in classes I provide to young folks for free. With use of these monitors, interest can be improved serving as a great incentive to get young folks involved in what may end up being a lucrative skill in this heavily IT focused world.

Decent quality and good value. Building a video game console for college BSEE projects. So far it does what it needs and good touch screen responses.

This screen works really well with the Raspberry Pi. Just plug and play in my experience. The only negative I can see is what others have mentioned - the mounting hardware on the back can break off very easily. I have lost one of these and now treat the remaining hardware very carefully. Probably better for one time mounting and leaving it alone, not for a use case where you will be mounting and unmounting the unit repeatedly. If you can live with that, or just use the included feet, these are great units.

Used in a BMO raspberry 5

Very pleased with this thing, so far. Worked perfectly out of the box for my Raspberry Pi 4 Model B, didn't have to fiddle with any code. Display is sharp and crisp, and it recognizes touch accurately across the whole screen with no dead spots. It comes with a small button on the top right on the PCB that controls the brightness, which has 10 settings (if you count 'Off' as the first one). The only minor complaint I have is that I wish it could go a bit brighter. In a low-light environment, it's maximum brightness is okay, but I think in brighter light environments it could do with being brighter.

Great 5inch screen for a raspberry pi. I have tested it with both the RPI3b and the Pi 4b. I have the Pi powered by a POE hat and so far has been great. Works great for klipperscreen. Great viewing angles. I can see it from across the room.

I use this as the display for my 3D printer (Klipper). With the touchscreen, I can do everything directly from it even though I'm usually doing things through Mainsail instead. Having the Pi mounted to the back of it makes it a nice looking and convenient "all in one" setup. I do suggest getting some right-angle adapters for your connections - it looks much better than seeing random cables sticking up and out before curving back. I've had no issues with it, no dead pixels, and it required no additional setup or configuration. I actually removed the factory display from my Neptune 3 Pro because it's redundant once you've got this. I personally left the plastic piece that comes on the screen connected; it's meant to be pulled off, but it has no bubbles and is applied well enough that it just seems like a screen protector.

One cable, and you're done. I didn't have to do anything else. On first boot, it worked. Video and touchscreen work. Using 5.1V 3.5A CanaKit power supply on USB C. No power issues. Standoffs and feet were good to get it up and running while I got the case printed. Accessing the TF Card (Micro SD) with the ribbon cable in the way is annoying, but not something you should have to do once you get everything running. There is a fan header, but there are two issues. One, if you use the provided legs, they are in the way. Two, it is only 3V. My fan is 5V, which means it runs at a low speed. I put it back on the GPIO header as the amount of air it was moving was vastly different between the two. Overall, it's a good screen, and I plan to buy more for other projects that require a 5" screen.

Great screen, good touch, but a bit difficult to install on pi 3B+ and SKR Mini E3 V3.0 som special tricks needed. Pi board fits nicely on the back of the screen, screws included, and feet, three different length cables included. Fair price.

Wonderful bit of kit - works out of the box on a Raspberry Pi 5 with no fiddly drivers to install. Had it up and running in a matter of minutes. Good clear display. Very happy indeed

Bon produit, utiliser avec un raspberry pi 3 et un dac en gpio pour apporter un peu de modernité a un vieil ampli. Il ne me manque plus qu'une belle intégration....

購入後、初期不良がありましたが、出品者に連絡を取ったところ、画像添付等の説明ですぐに新しいものを送っていただき、現在は問題なく動作しています。 迅速丁寧な対応に感謝します

Funktioniert wie beschrieben mit einem Pi5. Passende Flachbandleitung für Anschluß liegt bei.