DITRIO 12pcs Underglow RGB LED Strip Light Kit DC 12V with 2 Red Blinking Brake Light Styles for Motorcycles Trikes Golf Carts ATVs UTVs – M12r

The first thing that needs to be praised is the excellent customer service. The installed kit is the second kit I received because the first one I ordered was missing parts. Rather than going through the hassle of returning the kit and buying a different one I decided to give them a shot at fixing the problem. I emailed them directly and they responded the same day. They understood the problem and realized Amazon had sent me a returned kit. Over the course of a few days I corresponded with a few different people. Each person I dealt with was friendly, understanding, and professional. They decided to send me a brand new kit at no cost and I received it quicker than the original. I really appreciate the outstanding customer service. The light kit was super easy to install and works very well. It is bright, easy to use, and looks really good. I like that it came with a kill switch. It sets my mind at ease knowing it won’t drain my battery. The adhesive strips aren’t 3m but stick very well. You need to clean the area with auto soap and water then dry and then use a cotton ball with rubbing alcohol to prep the surface for adhesion. This is what I did and after three weeks they are still there. I was worried mostly about the two strips I put underneath the saddlebags but they are holding up very well. If your installing on a Harley touring underneath the tank close to the center there is a pocket that the lights fit into perfectly. I found the best way to mount them was to take the tank off, prep the surface, and then stick them on. You don’t need to go to that extreme I just wanted a perfect install. Next time I work on her I will find a suitable place near the front fender or under the fairing. For now It looks awesome and I’m safer at night. I highly recommend this kit if you’re looking for an inexpensive light kit. The kit paired with exceptional customer service is worth far more than what you’re paying.

First let me say that excellent customer service means a LOT in the world of online shopping. This seller is all about great CS! 10 stars for excellent customer service! I ordered this LED light kit after returning a similar kit (different vendor) because it was DOA with no instructions, no contact info, no documentation. DiTRIO was the exact opposite. They provide instructions and good documentation with color graphics. The kit is well packaged and protected. Best of all - they include a direct email address if you have questions or run into issue...which I did. The first DiTRIO kit I received had been clearly returned by a previous customer to Amazon for having one (of 12) bad LED pod, which was wrapped in scrap paper (see pictures). Amazon (not the seller) must have restocked the kit without replacing the bad pod, which got sent to me on my order. Luckily I did a bench test prior to installation and discovered the bad pod. Thankfully, DiTRIO includes a direct email. I emailed them about the bad pod, thinking it would be easier to replace the one pod. DiTRIO emailed me back THE SAME DAY and promised to send a whole, completely new kit. They sent a whole kit, two-day shipping! No return required. WOW! That is excellent customer service!! Here is why Is said "4 stars for the kit." The kit works fine...most of the time. As described and pictured here on Amazon, there is a control module with a LONG power lead. There is a master power button off that control module on a LONG lead. There is one 2/1 'Y' splitters. There are two 6/1 splitters. And then there are a total of 12 LED pods; four each of short, medium and long. There is a massive bundle of wires that require being taped, tied and tucked out of the way. I am riding a Honda Fury chopper...so not a lot of room between the side covers. It was a SQUEEZE to get all that wiring tucked in, which may contribute to why my remote doesn't have great range. At some point in the future I will replace the battery to see if it helps with the range, but for now it's all working. Small issues: The instructions are good, but have some misinformation. The buttons are mislabeled on the instructions. But just play with the remote and you'll get the hang of the operation. Sometimes, not all the time, I have to press the color-change button multiple times to get the color to cycle through. Other times it takes one click to advance. The remote seems to have a "mind of its own" sometimes. Similarly, sometimes but not all the time, when I press the light mode buttons, the lights "behave" and other times they do not, requiring multiple clicks. The LED pod leads are not as long I would have liked, especially for pods mounted forward of the tank. For all the cables and wires, you may still need to consider ordering a 4-pack of lead extensions (my recommendation is this 4-pack of extensions which has similarly excellent wire protection and weather resistance: https://smile.amazon.com/gp/product/B078TDJHS7/). This is minor stuff, and overall I'm very happy. I'd totally order this exact kit again, and recommend to everyone. Noteworthy differences in this kit vs other kits I've ordered and returned, or used on other bikes: Everything seems to be of very high quality. The cables are thick and each end has heat-shrink covering all wires up to the connection points. The LED pods are thick yet flexible. The 3M backing tape is strong! Just make sure you do a thorough job of cleaning the surface where the pod will be mounted and also make sure to degrease, de-dirt/dust and strip any waxes or protective coatings from the surface. The brake light interface is my favorite feature! I posted a video showing the brake light feature in action. No matter what color the LEDs are set for, all pods go solid red when you hit your brakes. I love that feature. I would caution you to make sure that you're not a "brake pumper" if you live in a state where flashing lights or alternating red/blue lights are reserved only for law enforcement. It's also worth noting that if your LEDs are set to solid red then there's no differentiation when you hit the brakes, as all LEDs are already solid red. The kit comes with two remotes. One remote is for your pocket, everyday use. The other remote is for "tuning" the light colors and brightness to your liking, and you will likely leave it in your tool box once you get everything set the way you like. The kit also comes with extra wire leads, some 2-sided tape and a couple of fork spade connectors for the power connections. The kit does not come with any t-tap or butt connectors for the brake lead, so you may want to pick up some basic electrical connectors before you begin (or use LOTS of electrical tape). Make sure when you install the pods on a moving part (e.g. the lower swing arm which pivots, front forks, etc) you give the wires enough "play" to move freely through the whole range of motion, yet not too much slack so as to get tangled in anything during minimal positioning. That could lead to the pods being damaged...or worse. Think before you "nail" everything in place. Pictures in my review: The first picture is from the first kit that came with the dead pod, wrapped in paper. I circled the end of the lead to show how the well the wires ends are protected, which is true for all the pods and wires. I love it! The remaining pics and videos are of the various light colors and testing the brake light option. I hope this review helps with your LED purchase decision and helps to dress up and customize your ride!

What a great product. When these pre-wired kits became available, they were very basic but did the trick. I have installed a ton of them. I wanted to pick one up for my Ryker, and I was really impressed with the quality and the features of this kit. Ditrio really perfected the prewired kit. Install was a breeze. Multiple style remotes are a nice touch. My bike is long and it reached from front to back. I know my friends will be asking me to do their bikes next, so I will definitely buy again. Thanks DITRIO!

I purchased and installed these within the last week. I really wish the instructions were better, regarding installation. I ended up wire nutting the brake line, since it's not exactly common sense as to where to connect that line. I also found the pos and neg "crimps" were extremely stiff. I used needle nose pliers, but had to squeeze with both hands and stand on the pliers on concrete to get a solid crimp on those lines. It would have been great had those been pre-crimped on delivery in the kit. Fortunately, on my 2012 HD Fat Bob, I was able to wire the majority of connections and keep the connections under the seat. My bike doesn't see much rain, or water in general, but I definitely prefer the connections to be housed "out of the weather" as much as possible. When installing the strips, I'd highly recommend checking out YouTube installs (even if alternate brand) to see where folks are placing them. I ended up only using 9 strips (so far). The 3M tape is great for adhesion, so you shouldn't have any issues applying them. Make sure you at least wipe the surface clean prior to installation. I had ordered a set of extensions at the same time as the kit, which I'm thankful I did. On my bike, anything beyond the front of the tank absolutely needs them. The flat remote is nice and very easy to use. I haven't had a good opportunity to test the distance it will work, but inside my garage I've had no issue. The key fob still remote is "ok" at best. I wish the buttons were labeled basically any other way then A B C D. If you plan on using that remote regularly, spend some time figuring out which button does what. The kit claims to have a wire that prevents battery drain, but there's no explanation as to how exactly it works. I'm not brave enough to leave mine on extended periods of time and just trusting the product description. Overall, the strips are nice, bright, and relatively easy to install with minimal to moderate mechanical/electrical knowledge. I'd recommend connecting the strips and holding them in place before actually applying them. This will give you a good idea of how it will look before you commit to placement. I've provided a couple images and a video of my kit. I also had one single large strip where two of the "bulbs" would not stay solid. They'd flicker nonstop. I contacted Ditrio and they are mailing me a replacement already. +1 for customer service!

A well designed and quality kit. Installed it onto a 2021 Kawasaki Ninja 400, but it has generic battery connectors that will work on just about any make or model of motorcycle. Has both a manual push button on-off switch and an RF wireless controller that also lets you select the color, or use a color-cycling mode. This particular size kit has more than enough LED lengths for any size bike, but smaller kits are also available for those who don't need as much. (I actually had 2x small strips still unused.) Also has a brake sensor wire that lets you automatically switch all LEDs to RED when breaking, but I don't use it myself. Comes with lots of zip ties for mounting, and the strips themselves have adhesive backing, though if you want to rely on adhesive then I would also add electrical tape instead of relying on only the backing adhesive. LED strips are encased in reasonably thick transparent material, feels like silicone, seems very durable just make sure neither it nor the wiring makes contact with any hot surfaces. (Note: No Bluetooth and no smartphone app, but I did not take off any stars because it does not claim to use those.)

This DITRIO underglow kit delivers excellent brightness and color quality. The 12 RGB strips light up the bike evenly, and the waterproof design holds up well in all weather. The two red brake‑light styles are a great safety feature, reacting quickly and making the bike more visible at night. Installation is straightforward, the wiring feels solid, and the remote controls are responsive. The lights look clean, vibrant, and add a sharp custom look while improving nighttime visibility. A reliable, high‑quality lighting upgrade.

If you’re thinking about getting a set of color change LEDs for your bike, seriously, look no further. When purchasing these I went off of reviews, price, and features and I could not be happier. The lights are very economical compared to many others on the market, but so far, they leave nothing to be desired in quality, or performance. The LEDs are bright and crisp, and the strips look well made and appear to be very water repellent. The overall build quality from the lights, wiring, remote control, key fob, packaging and instructions were all great quality. The adhesion seems to be holding up really well so far (I thoroughly cleaned all surfaces with rubbing alcohol and used a heat gun to activate the adhesive before applying). The install, if done right, is tedious, although not difficult. I took around 3 1/2 hours total including removal of my saddlebags, side covers, and fuel tank(all of which are easy tasks). I would recommend watching some videos on YouTube of installs on a similar bike, I don’t think brand of lights is critical for this purpose, just enough to get the idea. The twelve light kit provided enough LED strips to place lights under my saddlebags, on both sides of the frame behind the motor, on both sides of the lower frame illuminating the ground, under both sides of the fuel tank, behind the horn cover, under the front fairing, and inside both sides of the front fender. I was able to accomplish this with no extra wire extensions with some careful consideration beforehand. The colors are vivid and the patterns are cool to play with. The sync to music mode looks great and the option to connect to your brake light to illuminate all lights in red when the brakes are applied is a great added safety feature. These are a great option for any bike and I’m sure you’ll be as happy with them as I am.

Fairly e3asy to install...depends on WHERE you're trying to place them.

配線して、テストしたまではなんとか良かったのですが、数日間経って、点けてみたら点かない。また、粘着テープはあるものの、ライトの帯に型がついてて、素直に取り付けできない。カスタムサービスも簡単には連絡がつかない。やっぱり中○製はいい加減だ。

If could add extension one to one wire will be good. Longer led strips required for RYKER sides and bottom.

I almost never leave Amazon reviews, and things I order are usually less than expected, but these lights are one of the best products I've ever ordered, in terms of expectations vs. reality. There is nothing "cheap" feeling about these and the instructions are very detailed and thorough. I've never heard of the company and to be honest I assumed I'd be getting Chinese garbage, but I am extremely blown away here. Very well made. You can just see and feel the quality as soon as you open the box. I promise this isn't a paid endorsement. Very pleased.

I have these on my 2010 Road Glide and oh boy! The bike stands out even awesome!! People have actually come and asked me about this kit that I have happily shared it with them. Awesome kit and I have bought it again to put it on my son’s motorcycle. The BEST feature is when all lights go RED when you apply front/rear brake. Awesome feature not only in terms of cosmetics but for SAFETY as well!! Thanks

明るくて、良かったけど、時々 点いたり点かなかったりするので外そかと思ってる耐水性は雨の中で走って無いのでわからない！