Cruiser Accessories 79150 Mounting Plate, Black, 1 mount

It fits my 2019 Audi A6 perfectly. The car originally came with just 2 brackets stick out in between the front grill. (Audi owners in the states that require front license plate should know what am I talking about). When install the front license plate to those 2 brackets, it makes the license plate hangs really low on the bumper and looks awkward. This mounting plate solves the problem. Because the multiple openings for screws it allows me to install the license plate towards to the center of the bumper and looks more naturally. It is made by thick hard plastic, which is fairly sturdy. I recommend this product to others. FYI, I did not use screws came with this product. I bought a pack of 6 screws (M6 x 12mm) and used 2 of them to secure the mounting plate onto the car (to the Audi brackets) and other 4 screws to install the license plate onto this mounting plate. It works very well.

This item worked great on my Mom's Santa Fe. Mom recent moved to a state that requires a front license plate on her vehicle which never had a front plate holder since the state the car was originally purchased in did not require a front license plate. The bracket was easy to install. It was mounted in a few minutes and I was able to get Mom's new front plate mounted on her car. The supplied screws worked great, there have been no rattles, and the looks great, just like it was factory installed. Mom's car now has a front Plate holder and is able to pass new state inspections.

Good.

Great value. Does the job. Looks perfect. I bought a 20 year old car. The owner prior to me had it all 20 years. Old Honda. Anyway, when I bought it the license plates (TWO. Front and back) were on the for so long the screws were completely corroded and permanently stuck to the car. I’ve even tried hammering them off. WD40. Nothing worked. I had to saw the old plates off. Went to a body shop wanted to charge me $150 to remove and drill new holes. UM…NO. For a whole year I drive around with my plates zip ties and gorilla taped to my car… but it was annoying when it would rain or hit a bump, it would go crooked and hang. Finally came across these. SO PERFECT! Thank goodness! I was hesitant because a lot of people said the screws didn’t fit. That they were too long but mine were perfect! The extra length allowed for the zip ties that were mounting it to the front and back of my car to hold. You can’t even tell it’s zip tied on. It’s secure but movable as well..Not too firm or stuck. Which I wanted! No more ghetto lookin’ plates. Wish I did this a year ago.

I purchased this mounting plate to mount my license plate to my trailer back gate. I have a 6x12 utility trailer with a mesh loading gate. When I first purchased the trailer I used zip ties to mount my plate to the mesh, but I did not trust the zip ties to last long term. I found this mounting plate and thought I would give it a try. It was very easy to install my plate and it mounted straight and very secure, no wiggling around like when I was using the zip tie. The mounting plate is plastic and the included screws do a great job of grabbing the plastic. No complaints at all. As you can see in my included photos, the screws stuck out a bit on the back so I purchased some locking fasteners so that the screws were not exposed as much and it added an extra element to keep the screws tight. (Locking fasteners purchased separately) I would recommend this for those who need to securely mount a license plate, and don't want to spend money doing it. It works very well and I would definitely purchase again if I ever need another one.

Bracket is ok but the screws are 1/2” too long. Pain in a$$ to cut them off.

My Jeep Wrangler did not come with a front license plate holder. I checked this one out and was surprised at how durable it is relative its mounting surface on the car. Of course it is plastic, but it is not of the brittle composition as many are. It is as flexible as the plastic bumpers on most cars which would tend to flex with the bumper instead of snapping if it were brittle plastic or bending if it were metal. Screws fit nice and tight and the plate doesn't budge. Just be sure to have a good feel for when to stop. They won't strip if you understand material density and torque. I drilled into the plastic bumper of the Jeep in 4 places and used the "never rust stainless steel" License Plate Screws License Plate Screws for Domestic Cars & Trucks - RSD Never Rust Stainless Steel (Slotted Hex) from Amazon to secure it. In the photo, the 4 inside screws are those that attach to the bumper and the 4 outer screws are used for the plate itself.

This has proven to be a really good front plate mount. Added to a bumper that did not previously have mounting holes. This plate has several holes to choose from, to best accommodate desired mounting, and then had lots of holes available to match up with different places and mount holes. Def got the job done and was priced better than what could be found in local stores.

Good but material cheap

I was giving my daughter my old car, and found that the embedded nuts in my Mazda 5 rear hatch door had rusted out. This ended up being much less money than the flimsy proper replacements, and did not require me to pull the trunk lid apart. Luckily the Mazda 5 hatch lid is made of a composite material (fiberglass?) so I drilled some holes, mounted this into the holes with self-tapping stainless screws, then bolted her new plate to this... great solution, all plastic, will not rot out, well made. Very happy with this solution.

Quedo muy bien al carro se ve de buena calidad el plastico

I bought a used Audi Q5 and the license plate bracket had seized and wouldn’t allow me to mount my new license plate. A replacement bracket was $145 and would take several weeks to arrive. I bought this universal plate and it fits! Only negative is that the screws supplied to mount the license plate is longer than the thickness of the bracket so I ended up scratching the metal. Not a big deal as it’s hidden. I went to the store and spent another $3 and purchased some shorter screws to mount the license plate to the bracket. All in all it cost me under $40!

Genial funcionó mejor de lo que esperaba sustituí la base original y esta quedó mejor