Ergotron – HX Premium Heavy Duty Monitor Arm, Single Monitor VESA Desk Mount – for Flat or Slight Curved Ultrawide Monitors Up to 49 inches, 9.1-19.1kg – Standard Pivot, White (45-475-216)

After many years of using sub-standard monitor mounts and after much research I opted for the Ergotron HX for my Apple Thunderbolt display and I am not disappointed - quite the opposite, to the extent that I felt compelled to write this review. There is a reassuring heft to the arm, it is extremely well designed and engineered such that I could put it together by myself, within 20 minutes. The range of motion is excellent, I can sit, stand and swivel my monitor to suit as well as rotate landscape or portrait, or even tuck it flush against my wall to maximise desk space. I opted to mount it on the desk grommet and previous arms I have used have all eventually worn away due to the extremely heavy Apple monitor (~10kg), but this is, so far, flawless. The instructions seemed confusing at first, but I just followed the diagrams and it is fairly logical. You get an extremely wide assortment of screws and extensions to suit most Vesa mount sizes (though I did have to buy a separate Vesa adaptor for the Apple display), as well as the tools you need to get the job done. The cable tidy is effective-ish, though the plastic cover could have been metal, but I am really just nitpicking now. Thumbs up

Expensive, but when looking at the cheaper alternatives, and then this, which could be as supplied in an office, I'm glad to have spent more. The two I ordered are holding 43" Dell UHD monitors for myself and my wife. We are both professionals and therefore our working day is comprised of documents, e-mails, spreadsheets etc. Being older (!) the eyes appreciate the larger monitors - but the ergonomics of the space taken on our desks wasn't as good. These monitor arms have totally changed that - the perceived amount of desk space reclaimed seems far more, and, as alluded to, with two sets of older eyes, it's wonderful being able to adjust where the monitor hangs in mid air for the most comfortable use. It's not all perfect - the self installation instructions were not 100% clear, but the biggest obstacle is how to attache the monitor to the back plate - that took two of us, and the design here does need re-thinking - it isn't great in the version we bought. However, now the monitor is attached - it goes to, and stays, wherever I position it. A heads up: do not under estimate the forces caused by the weight of a monitor - even though ours are very large, I was somewhat surprised at how much I had to use the tightening tool to stop the monitor easing down to the desk after first putting it up. But to give the makers their due - they've put a lot of leeway into the tightening system, and once this niggle was sorted out, the monitor stays where put, even after moving it around because of zoom calls etc... Expensive, but so glad I bought.

Bought for use with my Samsung CJ890 49" Ultra wide, which weighs 12KG. Full disclosure, I originally went for a cheaper arm (£85) which was rated to hold up to 15KG. It was fine, but the VESA mount and bracket were thin and weak, meaning the monitor sagged forward. I was concerned it was going to break, landing my expensive monitor on the table/floor so decided to return and get the Ergotron. I figured that, for me, it's worth the price for peace of mind. The VESA mount is super sturdy (see photo for comparison of cheap thin vs thick strong Ergotron alternative). The range of motion is superb, and so smooth - no issues with sagging forward. Cable management is good, as is the bottom clamp. The arm itself is super strong, and so well finished - you really see the quality control that goes into the manufacture which you don't get with cheaper alternatives from no-body companies in China. My advise to anyone looking at this and considering a cheaper alternative for a 49" Ultra wide, don't waste your time like I did. Spend the extra cash and get the monitor arm that's clearly designed to hold it! I'm very happy with my purchase.

I purchased this monitor arm following some reviews on YouTube as to its suitability for supporting ultrawide screen monitors. I work with an LG 49WL95C ultra wide monitor that comes in with a weight of approx 29Ibs (12.6Kg) alongside the big real estate desktop space that I need for my work. The Ergotron arm copes with this monitor with ease. It's solid construction holds the monitor steady at various heights with ease and it provides good tilt motion movement. The arm also gives you the option to rotate the monitor from a horizontal to vertical position if you wish. Building the unit is not too difficult and can be done by one person for the majority of it. It's only when you come to fix the arm to the monitor itself at the end that you ideally need that second person to assist. The unit is finished in a high quality matt white and provides some basic cable management options in the frame itself. Overall I am very happy with this monitor arm. It is a solid and sturdy unit that easily holds the screen in whatever position you want and only occupies a small footprint on your desk, especially when compared to the stand that the monitor ships with.

I have been hunting for a perfect arm and after seeing atleast 20-25 arms and reading reviews i landed up with this option which i think i have made the right choice. Price : Expensive (worth it), on the higher side by at least 50quid Built & Quality : Solid like a tank, the finishes through out is excellent. If i have to complaint i will only call the cable casing plastic doesnt feel the same toughness to the rest of the parts though it does it job. Utility : Works like a jiffy, quite functional and can handle the load very well Overall : Impressed with Ergotron, if you dont mind spending the extra quids then its worth the buy

Used with Dell 37,5'' U3818DW (9,5kg) * Extremely easy to assemble. * Complimentary screws. * Gentle touch operation * Any desired position (tilt, swivel, rotate, up, down) * Very sturdy gentle beast Owned cheaper 30-60£ options in the past, had trust, operation and anger issues. The only issue I had so far was to miss a plastic top (knob like) screw in the package. Super cool solution which saves your from using a screwdriver. Contacted amazon who advised return. Contacted the manufacturer who offered postage from Netherlands. I realised I am not bothered enough to hassle anyone further and given up. Look no further item, highly recommend.

Firstly, I will admit installation took over an hour and i had to refer to youtube videos to help get the product installed. Beyond that, it is an excellent product that is incredibly sturdy and can support my ultra wide 34 inch monitor like it's a piece of paper. Other monitor arms have drooped or slowly succumbed to the weight but not this one. Holds that monitor up without giving up an inch in return, and can be adjusted very easy as well to move around my desk which is nice, Would highly recommend this product but take your time to install and follow youtube videos if putting together monitor arms isn't your expertise.

I know why you're here... You've got a MASSIVE 49 inch ultrawide monitor which is too heavy for every single monitor mount you've ever found. You want your desktop space back and you're tired of your monitors stock stand taking up 80% of your desk space. Well the search is over. This is the one. I kid you not. Simple setup with decent instructions. Super sturdy monitor arm and amount - as if it was made specifically for this monitor lol. Comes with all the tools you need, nothing extra is needed. Once I had mounted the monitor to the stand I had to tighten a few of the arms joints so that it would hold the monitor correctly. After that I was DONE. WELL WORTH THE £200.

I was looking for a monitor arm so I can suspend my very heavy 27” iMac. This Ergotron HX fits the bill perfectly! It’s rated at being able to carry 45 pounds and it sure is true! It has no trouble lifting my close to 22 pounds 27” iMac with very, very minimal wobble (which can be expected considering it’s cantilevered). The one I got was the white version and the product looks great in powder white. Installation was very easy; I had to use a VIVO VESA Mounting Adapter Kit for the iMac. The adapter attached to the stand. The first time I attached the iMac to the arm, it didn’t even drooped! There are points in the joints where you can adjust the tension and mine was already stiff right out of the box. A bit pricey, but worth it! I am not in any way worried that my iMac will fall down. Highly recommended!

台座やアーム部分はしっかりしているので問題ないです（その分重量はかなりある） レールにはめてスライドさせるという特性上、左右の調整は簡単ですが上下位置の微調整が難しく、「異サイズの場合」や「片方がフレームレスモニターでもう片方がフレーム太いモニター」などの場合（画像）、上下をドンピシャで合わせるのに苦労します。 ※左はASUS ROG STRIX XG27UG、右はEIZO FLEXSCAN 27.0 4K アームの操作をするためのレバーのようなものが取り付けられます。これをつけると机にモニターをつけて最低位置で使うことはできなくなるためその点は注意が必要ですが、あったほうがモニターの移動は格段に楽になります。 アーム部分の配線カバーは少し取れやすいかもしれないです。 両方とも４キロ～５キロ程度の重量があるモニターですが、動きは滑らか。 ということでまとめると ◎同サイズのモニターを並べて使うならおすすめ （ただし微調整はひと手間かかります） 〇異なるサイズのモニターを使うのにはあまり向かない〇 ×上下に並べることはできないです× △片方がPCモニタ、片方がタブレットやノートPCなどの使用は△ （ノートを操作したくて引き寄せるとモニターまでやってくるので）

J’ai utilisé des produits hautes gamme Arctic et j’ai retourné tout. J’ai vu Ergotron et je me suis dit « ou la le prix. Je vais vous dire que des que j’ai ouvert la boîte j’ai jamais pensé au prix. Le produit est sublime et chaque pièce parfaite. Les mechanisms, les pieces et l’attention au détail. Je voudrais remercier Ergotron pour ce produit car je vois qu’ils ont laissé les ingénieurs faire leur boulot. J’ai mis deux écrans MSI et j’ai la possibilité de mettre un troisième si je change la planche qui garde les écrans. Je peux mettre une avec trois si je veux et ça c’est bien. Je voudrais souligner deux choses avec ce support. Si votre table de bureaux est IKEA comme la mienne et epas trop solide car on a deux pieds, vous allez avoir des choques transmis par cotre clavier dans la table et dans le support. Les écrans peuvent bouger si vous réglez pas la tension et vous donne pas du support au bras avec le mur. Par example le mien est installé comme ça :/| et pas comme dans le videos ou vous voyez le bras comme ça. Deuxième chose, si vous avez un petit table vous allez avoir les écrans trop proches et il faut mettre le support comme ça /| ou |\. Dans cette position vous pouvez pousser le support vers le mur et avoir stabilité extra pour prévenir les choques du clavier.

Very expensive, but worth every penny. Every piece is well made and feels very premium, and super sturdy after mounted to the table. I’m sure this thing will last for a very long tome so it’s a good investment if you need to spend a lot of time working in front of computers.

Ich habe diesen Ständer erworben, um 2 Eizo 32" Monitore daran zu befestigen. Jeder der Monitore wiegt ohne Fuß etwa 6 kg. Der auf den Bildern zu sehende USB-Dock gehört nicht zum Lieferumfang. Die Montage geht auch mit geringem handwerklichem Geschick recht flott. Wer die Aufbauanleitung für ein Ikea Billy versteht, sollte hier keinen Grund für Verzweiflung finden. Der Ständer wiegt! Die angegebeben 11 kg sind kein Verschreiber! In meinem Fall liegen auf kleiner Fläche des Schreibtisches also über 20 kg auf. Ein Schreibtisch mit Metallunterkonstruktion ist da also hilfreich. Wird der Ständer so bewegt, dass die Monitore nicht mehr über der Platte schweben, sollte geschaut werden, dass das Gegengewicht des Tisches ausreicht, sonst droht ein Kentern des Schreibtisches! Dies ist nicht mein erster Halter, wohl aber der Erste in dieser Preisklasse. Es ist zu bedenken, dass der Ständer mehr kostet als die meisten Monitore. Aber - er ist jeden cent wert. Die Gesetze der Schwerkraft, Statik und Trägheit verhindern, dass da nie etwas nachschwingt, oder sich die Monitore mit dem kleinen Finger verstellen lassen. Aber die Verstellung funktioniert dennoch top! Der Griff erlaubt ein einfaches Anfassen und bei korrekter Einstellung der Federkraft ist ein zuverlässiges Verstellen möglich, ohne dass die Monitore übermäßig zurückschwingen. Die Kabelführung ist für 2 Strom und Monitorkabel sowie die USB Verkabelung der Monitore ausreichend bemessen. Sehr schön finde ich die Einstellmöglichkeiten: auch bei Schrägstellung (und gleichzeitig "gebogen") lassen sich die Monitore perfekt und bündig ausrichten. Endgültige Fixierung schaffen hier zwei mitgelieferte Klebestreifen, die rückseitig die Monitore verbinden. Wird volle Bewegungsfreiheit der Monitore gewünscht, sind ab Fuß des Ständers 1 1/2 Meter lange Kabel zu planen. Sollen kwie bei mir) die Monitore fixiert sein, reicht etwas mehr als ein Meter. Verbesserungswürdig halte ich die Horizontaleinstellung der Trägertraverse: so wie das Kippen der Monitore über eine Schraube gelöst ist, wünsche ich es mir auch für die Traverse. Auch ist ein Kippen der Traverse nicht vorgesehen, das ginge vermutlich zu Lasten der Stabilität. Optisch versprüht der Ständer den Charme einer Zahnarztpraxis, dass muss aber kein Nachteil sein: dieses Produkt ist durch und durch auf Zweckerfüllung konstruiert. Und dies ist eigentlich ein größtmögliches Kompliment an den Hersteller. Alles in Allem ein Monitorhalter als Geldanlage mit Ambitionen, in die Erbmasse einzugehen. So ein bisschen, wie Opas Hilti aus den 70ern. Wer das Geld ausgeben will, bekommt ein Qualität, die ein 50-€-Ständer nicht bietet.