RICOOMonitor Mount Tilt Swivel approx 15-33 Inch for LED LCD Flatscreens S2711 Wall Bracket Arm Gas Spring Universal for VESA 75x75 100x100

I am using this mount for 1 month and have no problems so far. It holds my 8-kg monitor easily. I can move monitor by hand to the left/right, up/down, forward/backward and tilt it also. Only skew may be done by changing some screw positions but in reality it is not needed at all (only if you fix this arm to the wall not quite vertically). Wall mounting (apart from more place) has additional positive - vibrations from the table are not carried to the monitor so the screen is more stable.In the initial state arm had some joints too loose, some too tight but after adjustment everything work smoothly. It looks cool and has reasonable price for 3-D mount with 15 kg load.

I'm using this for a 34 inch curved display which is around 8 kg. The instructions are really well written and the diagrams are very clear, making it straightforward to fit to the wall and mount the monitor. The arm balance is adjustable once the monitor has been mounted, allowing the it to move around easily and stay where you want it.

Very good sturdy TV mount, 1 criticism is that the locking screw for the gas lift tensioner is very difficult to remove initially as the cover on the gas lift arm ( which is in upright position when shipped ) slightly overlaps and covers the top of the screw so it gets bit chipped as you have to force the cover out of the way to get the screw past it. Once the screw is out and the tension adjusted, its easy to put back as the arm moves easily out of the way.Hence 4 stars

I'm seriously impressed with this mount. I bought two of them, one for a 27" iMac and one for a 27" Thunderbolt Display. The documentation isn't amazingly well translated into English, but really how hard is it to get three holes in the wall and screw this on?What I really like about this arm is how you adjust the screws to match the weight of your display, and then moving, tilting and rotating the display are seriously easy. Firm, but easy. All for a *much* lower price than many other options.

Mounting a 43" 4k Television. Low and against wall position for stowage, up and forward for use. Excellent unit for this job and looks elegant. The only draw back is that the cable stowage thru the arm is restricted just room for power and 1 HDMI and 1 USB cable. If you need two HDMI you may be better with one switched remotely at source, and this is the only way to have more than two.

I'm reasonably pleased with this now I've got it fitted. It happily supports my screen and goes up and down nicely and stays where I put it.The joint nearest to the wall was quite loose and wobbly when shipped, so I tightened it with a wrench. Both joints are a little on the creaky side but I expect that will improve with time, further adjustment or a drop of oil.The cable guides could be much better - it only just fits 3 wires (power, hdmi, usb) and when the arm is folded flat against the wall, the cables get pinched slightly.My main problem with installation was that the VESA plate is rather large, extending well beyond the 100mm screw holes. My monitor of course has a tight fitting and recessed VESA mount. I was considering buying an angle grinder but then found this  Newstar VESA Conversion Plate  which mercifully provided just enough clearance.Oh and the solid wall screws took some hard driving. You'll need a good variable speed drill with a clutch, and to put some force into it.

I am extremely happy with this product and even though it can at times feel the movement is limited due to it not being the largest of wall brackets, I actually it was very impressive in how much you are able to manoeuvre the tv in all directions in all sorts of angles. With my tv being an older model it is more on the slightly heavier side if flat screen tvs that are 42". It holds it with ease and as already stated the ability to position in various positions is what I needed. Not all brackets can move up and down as well as side to side. Very happy and would recommend.

used to mount an iMac to the wall, the computer is very heavy but this stand copes well, allows full manipulation and stays where it's left.

Support installer dans une caravane pour un petit écran.Bras et "articulations" rigide et réglable en tension permettant un positionnement stable te un repli contre cloison lors du roulage en parfaite sécurité.Très bonne qualité du produit.

Wollte bewusst einen, der auch höhenverstellbar ist und stiess ich auf den. erschein zwar teuer, aber:sieht super aus, wirkliche Qualität, hält mein riesiges Segel Samsung G49 (12kg curved) in allen Positionen und Achsen ohne nachzugeben.Halte ihn für diese Qualität jetzt auch für nicht mehr für zu teuer.

Es de muy buena calidad, funciona perfectamente, el rango de movimientos es lo que más necesitaba y he acertado

The media could not be loaded.  ATTENTION: le bras ne garde pas l'écran droit lorsqu'il est déplacé. REGARDEZ LE VIDEO avant d'acheterBE CAREFULL: the bracket don't keep the screen straight when it's moved to another position. WATCH THE VIDEO

bello e forte e robusto molto maneggevole e Ottimo! Finalmente una staffa universale per poter orientare come si vuole la propria TV LED 32'. Lo consiglio, e poi Amazon è oramai un ottimo servizio. Il prezzo è giusto anche in confronto ad altre marche più blasonate