11670013 1/2-Inch Pro Craft Impact Driver Set (13-Piece)

buy again

Everyone gets one of those jobs sometimes. When its all going well, but just one or maybe two screws just won't budge. Well, that's what happened to me. I'd been stripping an engine from an old Honda and a couple of engine cover screws were stuck good and tight. The frustrating thing was, it was just two. So it made no sense to lay out a lot of money on a tool I would probably stick at the back of my tool cabinet to never use again. So the search was on for a low cost tool to do this one job. That's why I ordered the Hilka. Even with postage, it was less than any other I'd seen anywhere. And when it came, I put it straight to work. One tap, the first screw came out. next tap, the other screw. Job done, easy, quick. Just the job. Looking at the tool, its heavy, well finished and the half-inch socket drive to hex-bit converter that comes with it is almost worth the money alone. And you get a box with a selection of bits. the bits are standard, so lose or break one and replacements are available everywhere. So, yes, I'm well satisfied. And as a bonus, this cheap little driver is well up to any job I'm likely to call on it for in the future. A bargain. Go for it!

Tried to use it to help a wheel lug nut (of the anti-theft variety) come loose, but it was unsuccessful - had to use another method implicating a jack and a wall. I suppose this would work fine for smaller screws - but in this case why make it a 1/2inch drive if it lacks the power. Can't really fault the item itself as it is built decently and comes with a metal case - good value for money.

My husband loves this. Good value for money, easy to use and has a good strong case

All I can say is this is a life saver. Managed to get several stuck screws out from the motorcycle renovation I was carrying out

3 star given because first two uses it broke 2 of the bits it came with. After using my reinforced bits it easily got the gob done.... the bits it comes with I wouldn't rate at all but the driver itself is a must have in anybody tool box. Got me out of a pickle while trying to replace a seized bolt on my motocycle breaks.

This is a well made bit of kit well worth the money

Broke immediately on first use and shredded the head of the screw I was trying to loosen. Set the tool to "L" for loosen but it slipped off during use and jammed solid between the two settings. Couldn't even retract it in a vice. Terrible product !

Normal condition and it's very heavy

Ottimo cacciavite a percussione, avevo esigenza di svitare viti del carter della mia moto che erano dannatamente bloccate e non ne volevano sapere di svitarsi nemmeno con un ottimo cacciavite usag che alla fine le ha spanate quasi del tutto. Preso dalla rabbia ho acquistato questo attrezzo: buona la dotazione di bits, ottima la qualità dei materiali e molto bella l'idea del contenitore in metallo...sensazione di durabilità di altri tempi. Scelgo il bit adatto, lo inserisco, mazzuola e un solo colpo e sento la vita svitarsi...la maledetta non ha potuto opporre alcuna resistenza e nonostante fosse quasi del tutto spanata il colpo di mazzuola ha proprio scavato la forma del bit a croce nella vista al punto che ho dovuto estrale con la pinza in una morsa. Tutto questo indica sicuramente che la qualità dei materiali è ottima e i bits fanno il loro dovere alla pari degli altri prodotti blasonati. Mi sento di non condividere le critiche negative lasciate da alcuni utenti perchè in base alla mia esperienza sono riuscito a raggiungere il mio obiettivo e con una spesa molto abbordabile, inoltre data la qualità dei materiali, credo che il rapporto prezzo qualità sia più sbilanciato verso la qualità. Dunque lo consiglio a chi non è "affezionato" ai marchi blasonati e bada alla sostanza. Non recensisco per interessi, nella vita faccio tutt'altro, ma credo molto nel sistema delle recensioni per cui se questa mia recensione ti può aver aiutato in qualche modo mi fa piacere. Alla prossima.

I haven't used the impact screwdriver much(yet), but I'm very familiar with this kind of driver. If it breaks I will update this review. This one seems solid, and I've had very similar ones serve me for years until they get lost. The box is a bit loose and the finish of the metal is a bit crude, but I guess it will last. You get 3 slotted, 3 Philips ,3 Pozidriv and 4 Torx bits that seem sturdy. It's good value

Sehr geehrte Damen und Herren Hallo zusammen Ware dankend erhalten Gerne auf ein neues Angebot freue ich mich. Mit freundlichen Grüßen Incarbone Rosario

superb