VeeBath Toilet Inlet Valve Bottom Entry, Inlet Float Valve 1/2 inch

happy with item used in ideal standard system with 1/2" connector. easy to set up and fitted well and would use again. quality is good and easy system to set the height on the stack and also some adjustment on the float. included the rubber gasket for the inside of the cistern and locking ring and washer for the outside.

Perfect, cheaper than expected, does its job. Make sure you read the instructions on how to adjust its height. Replacement totally doable by anyone with basic tools.

Thing of a beauty, a joy forever. Super easy to install, fits into the tiniest of spaces. I left the old flushing mechanism in the tank and just replaced the old cock and ball valve with this. It's quiet and fills up the 8 litre tank in under 30 seconds. (Compared to the 3 minutes before) Just make sure to twist the shaft and set the top of the blue plastic (critical level) to the height of the syphon's overflow. Then twist to lock again and insert the small plastic piece back to secure the position. Before installing the mains water, be sure to remove the piece of plastic from inside the 1/2" brass inlet at the bottom. Took me no time to install, no leaks or noise. ------------------------------------------------------------------------------------------------ UPDATE: After a week, it stopped shutting down completely and the excess water is now leaking into the bowl. Buying a Fluidmaster instead.... ------------------------------------------------------------------------------------------------ UPDATE UPDATE: After another week, it started working perfectly. No leaks or overflow. So in the end I kept it. I don't know why it had a hiccup but it gets plenty of use and has no problems.

I bought this particular style of valve to replace an old style ball arm type as part of a complete refurbishment of the bodge up from hell (see photo) . The new valve now sits in splendid isolation on the left hand side of the cistern with the water inlet changed to suit and the previous right side entry hole blanked off. Initially I looked at other valves costing twice as much and thought that perhaps this one wouldn’t be so good but went ahead and bought it anyway. Surprisingly it is pretty well made and is supplied with a decent idiot proof cone shaped rubber sealing washer. Not sure if the stem is actually brass or brass finish . Hopefully it is plated copper and not DinkyToy alloy . The instructions are pretty basic and do not explain fully how to adjust the height of the stem . This is done by twisting and unlocking , sliding to size and then twisting back to lock and is probably best done before fitting. Only grip the shaft when twisting as the working parts are less robust and will probably break off. The packaging says it’s designed in the UK and made in China (what isn’t) . Anyway if it’s as good as my I-Pad I won’t worry. The inlet is fitted with a removable filter with regular cleaning advised so I suspect this and others of the type are susceptible to dirt or debris so perhaps worth paying attention to . The metal connection , unlike plastic should stand up to routine maintenance . Suitable for low and high pressure without the need for restriction inserts and on my 3 bar mains fills in seconds and is particularly quiet, unlike its predecessor mimicking a hose pipe filling a bucket and dripping encore. Instructions do not include any reference to dismantling the top end for washer replacement etc , but considering you might have to pay £3-4 for the washer alone what would be the point, better to get another valve .

Easy straight forward to fit

Easy to install, silent and fills up quickly.

Good quality Valve and easy to fit. Sorted my constant overflowing problem. Recommended 👍

This was the cheapest option I could find but worked well. Although it felt slightly cheap and was fiddly, I did manage to fit myself and it worked successfully. I am not a plumber, nor am I very practical, and although it took a couple of hours, I did manage to get it to work without any leaks. From memory, there weren't any instructions, or certainly they weren't that useful, but was able to resolve with a couple of YouTube videos. One of the positives is that it fills quickly and quietly. Overall positive and I would probably purchase again if I needed another.

Válvula de enchimento ajustável, aconselho para autoclismos de tamanho pequeno e médio, é bastante robusta e a rosca é resistente. A escolha certa para garantir funcionalidade e qualidade durante muitos anos

Alles naar wens

allt bara bra

Funziona a dovere

Funktioniert zu 100%. Mehr als hervorragende Funktion geht nicht!