Loctite 319 Rear View Mirror Bonder 0.5ml

Worked really well, but you really do need to follow the instructions. It goes off really quickly once you put the adhesive onto the mesh. If you take too long getting it onto the windscreen, or if you try to move it once you stick it onto the glass, it will not work. So, you have a matter of a few seconds to put the adhesive onto the metal, place the mesh onto the adhesive, and position the base onto windscreen. Once in place, do not move, or the adhesive will not work. And remember, this only works for bare metal to bare glass. And really you need to separate the mirror from the base, if you're trying to hold the entire mirror assembly in place you will almost certainly fail.

tried to use for sticking a dash cam base to the screen. just would not work.

Excellent product but make sure you clean the glass and mounting plate properly or it won’t work. I didn’t do it properly the first time and it failed but the second time u cleaned the glass with vanish remover and the plate, it worked and has been fine for months now

I have only given four stars simply because I've only just applied this stuff to my mirror and even though all seems well, only time will tell if it will work in the long term. I followed instructions, cleaned area and button with alcohol based cleaner first. It was a warm day, I get the impression from the instructions that it probably takes longer to stick on a cold day. It stuck really well, very fast. Waited around 20 mins before hanging the mirror. Hopefully this stuff will resist the heat (superglue did not) but only time will tell. So far it's worked exactly as it says. Would recommend.

Yes it works , followed the instructions and no problems , on my daughters BMW , the interior mirror fell off with the button still in it , after some careful wrestling with some grips I managed to release the button , So after carefully working out where to put the button I marked the screen with some tape and bonded the button in place as per instructions , I waited 30 minuets twice as long as instructed . The real test was after connecting the wiring back I had to quarter turn the mirror onto the button , this took some force and quite clearly the bond held and the mirror clicked into position , Amazon driver apparently was unable to gain access to my house , the ring doorbell suggests differently so I had to pay extra to get a prime same day delivery , had to happen when it really is urgent , 1st one still not arrived but I will keep it anyway if it does arrive.

Easy enough to apply but did not adhere enough to hold the rearview mirror to the windscreen. I was very careful to follow the instructions to the letter but even after leaving for 24 hours the mirror 'button' just came unstuck when attaching the mirror. Further more, I was then able to peel the pad from the windscreen as if it was a peice of masking tape!

Works! Everyone negative reviews are dead wrong. Watch a YouTube tutorial before apply the glue. The instructions are too long to read and you'll start to get sleepy. For me I scrapped and wiped the glue residue from the car glass Made sure that it's a warm sunny day and no moisture on glass That piece of cloth that you get from the package in between the glue So far so good. Got the job done

The good thing it was easy to use and instructions were easy to follow, but glue it self I found was not so good, as I put the mesh on as it said and then glued my interior mirror bit to it and held it in place for a few minutes and it fell off, so I found the glue not any good. So it was a waste of my money.

Tiene una banda rugosa para colocar entre el cristal y el retrovisor, lo puse colocando en ambas caras el pegamento, lo dejé presionado varios minutos y se quedó perfecto. No se ha vuelto a caer el retrovisor, pese a que no tenía la pieza metálica que traen algunos como guía. Muy efectivo si se usa correctamente y se limpia la superficie del cristal antes. Las instrucciones van en inglés y no son muy claras, hay que usar la lógica..........el español ya supera en número de usuarios a los ingleses, sería un detalle del fabricante..............

Fixed the problem perfect, very easy to do

Despues de una semana de aplicar el producto y dejarlo fijado con cinta y en el garaje sin usar el coche al quitarle la cinta veo que no esta pegado. Creo que puede ser por varios motivos el primero porque el espejo tiene un caparazon en la base que sirve para tapar el sensor de luces y lluvia y segundo porque la zona donde se aplica el pegamento es una chapa de la base pero esa chapa coincide en el cristal con una zona sombreada como en gris y que el pegamento ay no agarre incluso que no se termine de secar. Asique no lo recomiendo para espejos modernos o con peso aunque puede que en los antiguos que son mas simples pueda funcionar

Prodotto pessimo e completamente inefficace !!! Seguito pedissequamente le istruzioni presenti sulla scatola, ma la staffa dello specchietto della mia VW Passat non ha voluto sapere di attaccarsi al vetro anche dopo oltre 3 minuti di pressione sul parabrezza eseguita con le mani. Sconsiglio vivamente, 16€ buttati nel cestino. DELUSO!

Lo compré porque se despegó el retrovisor interior de mi coche. Trae una pequeña malla cuadrada que hay que recortar para adaptarla al tamaño que necesites y detrás del envase vienen las instrucciones sobre dónde y cómo poner el pegamento y cuánto tiempo esperar. Ya han pasado unos 2 meses desde que lo utilicé y el espejo sigue bien fijado, así que lo recomiendo.