U.S. Solid Water Cooler 25L - Tig Welder Torch Water Cooling Machine - Wind Tunnel Heat Dissipation System TIG MIG Welder with Transparent Window - Improved Cooling Effect - Non-Leak Design

nice cooler, quick shipping

UPDATE: I fixed the motor stall issue: the pump was jammed, not the capacitor. Not why it jammed, but the motor shaft would barely spin, so I un-bolted the pump - then the shaft began spinning freely, then re-bolted. Now runs as it should. I also corrected the OEM wiring error of the Line/Neutral swap.Lack of quality control. When I first received, checked the fuse: none installed. Opened up lid and found the fuse holder is not even wired! Was working fine for the first year or so - use it with an induction forge, and maybe only 10x. This week I went to use and got the same buzzing 'boyd ritter's' review video shows. I suspect the motor capacitor is bad, so I opened... The blue and brown leads were swapped at the switch - BROWN should be line voltage and BLUE should be neutral, so swapping them IS an issue. I am NOT sure if they landed the line and neutral lines correctly in the motor box and just connected wrong at the switch?? If they swapped at the switch, then the motor may have been running backwards and the capacitor biased wrong - my AC motor skills not strong. Will have to research and verify the motor wiring. Do not recommend.

Does the job for an induction furnace.Fan is loud and always runs when on. For the intermittent use I do most of the time, it would be nice to not bother with the fan until the water gets at least a couple of degrees above ambient.

I have this unit connected to a 20kw induction heater. No leaks and keeps the machine cool, as it should. For the price this is a definite buy.

For the price in 25L you can't beat it, no even vevor is a better price.

The media could not be loaded. Where to start? As you can see in the video after 2 hours of use (this is not contestant use only 40 seconds at a time) the cooler does not cool the liquid. Two days in a roll. Trying to get help is a waste of time. I have already spent days trying to get service on the induction forge and that was a joke! Send pictures/ send more pictures! Send videos/send more videos! Nothing, no help what so ever. Add up the money that I wasted on buying these two items and the little time of use under 40 hours total if that. Stay away from US SOLID. They are not a U.S. company nor do they have a support office in Cleveland Ohio.

It works. I have had to take the top off twice and bump the fan to get it to start up so I just leave the top off. Sounds like a 747 taking off but you get used to it after awhile. What can I say - it works.

I bought this unit to go along with my induction forge and quite simply it doesnt cool the water at all.