Mitutoyo 530-122 Vernier Caliper, 0mm-150 mm Range, 0.03 mm Accuracy

This is a fantastic calliper. I've had digital ones and they were so unreliable. The instructions give you a guide on how to measure to 0.02mm you just have to do a little bit of maths. I'm really impressed. This is a metric only version, but who needs imperial. A great purchase that will last a lifetime.

I have the digital version of this caller at work and I constantly worry about getting it wet / dirty. It was also very expensive. For my home workshop, I bought a cheap digital vernier for about 20 quid. The cheap vernier is TOTAL rubbish, but I can't afford the digital Mitutoyo so I cast my mind back 20 years to how I used to measure and make things. It might seem like a £20 digital caliper is good value versus a £40 Mitutoyo vernier, but consider it this way; If you're making parts,you want them to be correct to print.If you have inaccurate measuring equipment the parts won't be correct. If they aren't correct, they're scrap. It doesn't take long to create £20 of scrap so if you want good value measuring equipment, get these and not some cheapo digital caliper. As for the quality of the finish, it's fair to say these aren't as well finished as the set I used 20 years ago,but they're still very well made in the important areas.

This is like the Seiko watch of vernier calipers, it is slightly more expensive than the Chinese calipers available on Amazon but it is worth the extra price because it is very well made and has no zero-point error like the cheaper ones do, so it is money well spent

Perfect thanks good delivery pack.

Decent quality. Comes with little soft plastic pouch which I found really useful compared to the hard plastic case.

Well, where to start? I was impressed by the reviews of other buyers considering this as a very good product. I guess those reviews are based probably on no previous experience with an real 20 - 30 year old actual Caliper made in Czechoslovakia. What am I on about? I do really miss the quality of the products that were made 30 year's ago. Some actual facts: Does the tool feel accurate? Yes, it does. I have no doubt it is accurate. If that is your only criterion. Go for it. Is the tool well made? Here is where it get a bit iffy in my opinion. Despite quite a decent feel and look, you will notice some rough edges here and then when you look closer. I think it should have been machined a bit better, sharp edges should have been polished more carefully. Lastly - and this is something I did not notice based on the description - the wheel use to open/close the caliper is fake. Its probably meant to be like that and is not a realy deal breaker either. I will probably keep the item and likely I would buy it again. Yet I can't give it 5 stars. Not at this price tag.

Goede service, aangenaam contact.

Mitutoyo est une marque japonaise reconnue dans la fabrication d'outils de mesure de précision. Ce pieds à coulisse ne déroge pas à la règle. L'outil est très qualitatif. La coulisse glisse parfaitement avec le pouce, sans accroche, mais il y a suffisamment de friction pour que celle-ci ne se déplace pas seule. Une vis permet d'immobiliser la coulisse pour maintenir la mesure. Les + ✅ La qualité ✅ L'outil est en acier trempé inoxydable, avec une finition chromés ou mats selon les parties. ✅ Les mâchoires sont épaisses, ce qui limite les mesures de biais, et donc les erreurs de mesure. ✅ Possibilité de mesurer une distance à l'intérieur d'un objet ou par l’extérieur. ✅ Vis pour maintenir la mesure ✅ Jauge de profondeur Les - ❎ La housse de protection en plastique bas de gamme Le vernier est très lisible. Pour apprendre à vous en servir, je vous recommande de consulter la page wikipedia, qui est très bien faite. 🔹 Poids : 143g 🔹 Longueur max mesurable : 150 mm 🔹 Précision : 0.02 mm 🔹 Unité : métrique 🔹 Dimension (voir image) : L=229 mm a=40 mm b=21 mm c=17 mm d=16 mm Existe aussi à avec une vis de réglage fin : Mitutoyo MIT532-119

Not Japanese craftsmanship, feels and looks like a Chinese copy with brand name.

This caliper is calibrated perfectly. It works well for metric measurements, with no dials to fall apart or digital readouts to fail. Great little tool.

Der Messschieber hat allen Ernstes keine Gewindetabelle hinten drauf! Warum??? Sorry kann ich nicht nachvollziehen warum diese freie Fläche hinten frei gelassen wird. Seit ich Messschieber nutze (25 Jahre) habe ich immer eine Tabelle hinten drauf, das ist so praktisch. Sehr schade.