Fzone 2.5 L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator and Needle Valve for Aquarium Plants Tanks

No seal problems, all parts there, instructions are mostly good. If you dont have a scale, you'll need to do a little math. I added 13.8 Tablespoons Baking Soda, and 8.3 Tablespoons Citric Acid with my 300ML water and it seems to be working out... but again do your own math and make sure do NOT take my word for it. It's been a few weeks and my plants seem happy and my fish are alive so those measurements haven't killed my 29G just yet... Anyways, the setup seems ideal and is decent price as far as I can tell. It does the job well, and hasn't failed me yet. Seems like it's decently made so I'm happy with my purchace. Would buy from this seller again. On a final note... buy a CO2 drop checker. I did some math and figured 1 bubble per 2 seconds was good.... now I'm using 4 bubbles per 1 second. It will help you figure out how much to be adding to your tank and save you mental stress trying to guess. Just take it SLOW and figure out what rate gets your checker green fastest and keeps it green without going into the yellow (danger) zone.

Fzone has fantastic customer support (thank you Cheryl). I was missing the white piece on my filter and they sent me a new filter. I have used an fzone regulator on a paintball tank previously, but I had a stroke, and it's no longer possible for me to go get CO2. Therefore, I looked for a CO2 generator and was happy to find that fzone had this one Because of my previous familiarity with using CO2, despite the horrible instructions, it was quite easy to get set up and get started. This unit came with a solenoid which works perfectly. I have it on a timer to turn on in the morning and shut off at night. I replaced the diffuser with one from clscea (stainless steel, widen hook 25cm) which works much better, especially for rimmed tanks. The supplied funnel's base is too narrow to be of real use (fzone please replace this). This unit no leaks, it's looks great, runs quietly, gives me great value for money, and I have to trim my stem plants more often now and my plants look fantastic Fzone makes great products and I will buy from them again.

After I posted the review below the company immediately reached out to me. They have amazing customer service and take their reputation very seriously. My product is working fine and they very professionally addressed all my concerns. I originally gave them 3 stars. I have changed that to a well deserved 5 stars. So far so good. The directions are not clear. They only take you part way through the setup and do not include instructions on the solenoid. I would have been stuck if I hadn’t found a you tube video. The knob controlling the bubbles is very very touchy.

It’s a pretty solid system. The needle valve is a little sensitive for my taste. It’s not bad but it could be a little better. The materials are all high quality. The system is running well without any issues. The diffuser is a little on the low end. The bubbles are a mixture of good micro bubbles and some larger bubbles. I would recommend getting another one if you want tiny bubbles all around. It’s solid though as none of the bubbles were large. The system was easy to set up. They say use 200 grams of citric acid and 200 of baking soda. Chemistry says you need 200 grams citric acid and 260 grams of baking soda to get a perfect consumption in the chemical reaction based on the mole weight of each. I went with science to avoid having a lot of left over matter when the tank needs to be refilled. You can avoid the crust or unused citric acid some complained about in the tank this way as all the citric acid will be used in the reaction. That’s a pretty minor issue though. All in all, it’s a good build and quality materials. I got some pearling of my plants day one. The price isn’t bad given everything. I would have given 5 stars for a slightly better needle valve and a slightly better diffuser but it’s a good quality system. Update: Day two my diffuser is even worse. The plate doesn’t seem attached and all the co2 is just leaking out the edge of the diffuser. Definitely a four star product because the diffuser is worthless. But that’s my only complaint. Solenoid runs cool, everything else works great.

Just received the product this afternoon and got it up and running. At last look it is charged with about 410 psi CO2 and 60 PSI in the can, which is good. I am very happy over all with the product, but I do want to point out some serious issues with the written directions included with the system. I think they are really bad because it does not even address how to hook up the Solenoid. I figured out by intuition. The really big mistake in the instructions is the wrong material weights and water volume to mix together in the tank. That mistake cost me $16 in citric acid and sodium bicarbonate material. I had to depressurize the cylinder and empty the contents and start over. That was really bad. I have included pics of the instruction sheet and the label on top of the cylinder in yellow, which does not match steps 1 and 2 in the instructions. Also, I did end up breaking the curved glass CO2 hose connector that hangs over the rim of the tank trying to assemble it. The adjustable valve that releases C02 into the bubble counter is very very very touchy and hard to dial in because it is tight to turn and the slightest adjustment once it is open and gas is flowing will exponentially alter the bubble rate. Not a fan of the adjustable valve because it is so difficult to dial in. I tried to time 1 bbl per sec but could not exactly dial it in. Close enough I guess. Over all, for the price and what it achieves it is a good product and I do recommend it. I plan to keep it for at least 90 days to see how it performs. If I end up being dissatisfied with the system, which I do not anticipate at this point in time, I will purchase a 10LB CO2 tank from Airgas nearby and get CO2 refills going forward for about $30. I also purchased the Milwaukee 122 PH controller at Amazon to mitigate any harmful PH changes in the aquarium. It will shut off the solenoid power on the CO2 tank if the PH drops below my desired limit. Pretty cool setup over all for a relative low cost CO2 system and I'm pretty excited about it. Hope this info helps. 60 day update: refilling the cylinder because it was close to being in the Red on the C02 gauge. However, there is an issue with the PSI tank gauge. It is stuck at 50PSI but, the regulator is not even connected to the tank. I disassembled it to add the new ingredients. I tried tapping on the glass PSI gauge to get it unstuck to no avail. And of course its past the 30 day return period. See added picture.

Working amazing. Way better than having to drive to the store hoping they have the same size tank to swap out.

I'm a first time CO2 user and this is my second venture into the aquarium hobby. My first go round, I always wanted an nice lush planted tank but I was in my early teens and couldn't afford the size tank or the items required for that kind of setup. Now on my second go round, I decided to follow that path of my dream aquarium and with that came the initially overwhelming prospect of CO2 systems. The Fzone CO2 generator system has made that very simple and significantly less daunting for me. It comes with almost everything that you need to set up the system. The only things the system doesn't come with is sodium bicarbonate, citric acid, a digital scale, or check valves. I highly recommend you spend a couple dollars on check valves. Those check valves will keep water from backflowing into the co2 lines when you have the system off. If you want to make your life super simple, you will need them. They also allow you to easily disconnect the bubble checker when it comes time to refill the bottle with your baking soda and citric acid. Now, I did say I'm new to CO2 so I did make a mistake when filling the bottle. The directions specifically state to hold the bottle at a 45 degree angle when filling. I did this until I went to grab the cap. When I reached for the cap of the tank I set the canister straight up, which meant I ended up having a fountain of the chemical reaction shoot out of the top of the tank until I was able to screw the cap onto it. Don't make the same mistake I made. That was my own mistake I made, like I said I knew it had to be held at an angle and I had an airheaded moment. Now I will say, if you have a larger tank, go for the 5L kit. I have a 75 gallon and I have had the CO2 on a timer, and my tank pressure has gone from 400+ PSI when freshly full to 150 PSI in 4 days. I will most likely need to upgrade to the 5L bottle here in the next month or so, but I also have my system running for 11hrs a day. As stated, the tank pressure goes up to over 400PSI, which already tells me that the build quality is quite superb, and I noticed some other reviews state that the knob to adjust the bubble flow was a bit touchy. My specific system was just touchy enough to where it was actually pretty easy to set my flow rate at 3 bubbles a second without really struggling with having to fiddle around with it. The tank is pretty weighty, but I believe that's due to the fact that it is built very well. When you initially fill the tank it will get cold enough to condensate on the outside, but that is due to the chemical reaction. It's not a flaw. Overall the 2.5L was perfect for me to dip my toes into the beautiful world of planted tanks, and is good value for people who have a smaller setup, such as a 29G or less. For my specific use case, I will need the 5L so I don't have to refill every week.

This whole kits garbage. Every part except for the canister itself broke. One by one, it was first the solenoid, replaced it with the replacememt solenoid F zone sells, that also broke, and then so did the second one. Mind you, this is all under 2 months. Then the control valve broke and leaked a ton, so I had to replaced that. Then the bubble counter cracked on the bottom thread, again a huge leak. This thing wasn’t built to handle an attack from a butterfly. So in all I’ve bought the kit, 3 replacement solenoids, a new control valve (the part that screw into the top of the canister), and now I’m about to buy a replacement bubble counter. Garbage! The only thing that stands up is the canister itself and I bet that’s the only part F-zone outsourced. From experience, if you guys want a good solenoid, buy the Clscea one in my photos. And I tried replacing the seals on the control valve to stop the leak, to no avail. It literally shot baking soda all over everything for a good 7 minutes straight with no way to stop it. And a citric acid/baking soda mix is so difficult to clean if you let it dry, cleaning solutions don’t dissolve it. So I guess ill just live with the baking soda spray all over my aquarium cabinet. I hate this kit!

Recensione Generatore di CO2 per Acquario Ho recentemente installato questo generatore di CO2 nel mio acquario dolce densamente piantumato e ne sono estremamente soddisfatto. Il sistema, basato sulla reazione chimica tra bicarbonato, acido citrico e acqua, si è rivelato efficiente ed economico. La bombola da 2,5 litri, una volta riempita, garantisce un'autonomia davvero notevole. La valvola a spillo permette una regolazione precisa del rilascio di CO2, consentendo di adattare il flusso alle esigenze delle piante e alle dimensioni dell'acquario. La presenza dell'elettrovalvola è un valore aggiunto. Collegandola ad un timer, è possibile programmare con precisione gli orari di erogazione della CO2, ottimizzando così la crescita delle piante e riducendo gli sprechi. Vantaggi: Efficienza: La reazione chimica garantisce una produzione costante di CO2. Economicità: La bombola da 2,5 litri offre una lunga autonomia, riducendo i costi a lungo termine. Precisione: La valvola a spillo permette una regolazione fine del flusso di CO2. Flessibilità: L'elettrovalvola consente di programmare gli orari di erogazione. Sicurezza: Il sistema è sicuro e affidabile. Assistenza clienti: Il servizio clienti si è dimostrato celere, gentile, efficiente, preparato e sempre disponibile a fornire supporto. Conclusioni: Questo generatore di CO2 rappresenta un'ottima soluzione per gli acquari piantumati. La sua semplicità d'uso, l'efficienza, la flessibilità e l'assistenza clienti di alto livello lo rendono un prodotto altamente consigliato. Se cercate un sistema di fertilizzazione a CO2 affidabile e conveniente, non potete sbagliare. La proporzione ideale dei reagenti per una bombola di 2,5 litri è la seguente: - 220 gr bicarbonato (da mettere per primo) - 200 gr acido citrico (da mettere per secondo) - 300 ml acqua fredda che rallenta la reazione iniziale dando il tempo di chiudere la bombola con predite minime di pressione. N.B. La bombola possibilmente sarebbe meglio se fosse asciutta. Questa ricetta crea sufficiente pressione per generare CO2 per circa 3/4 settimane a 2 bolle circa al secondo per 8 ore al giorno e lascia poco o nulla di residuo di citrato di sodio nella bombola. Il citrato di sodio si forma naturalmente come residuo della reazione chimica e se è troppo può depositarsi sul fondo della bombola ed è difficile da togliere perché è piuttosto duro. Sebbene, con la poca chimica scolastica che conosco, col calcolo delle Masse Molari il rapporto più efficace tra il reagente, l'acido citrico, e il partner reattivo, il bicarbonato di sodio, sia di 1:1,3 quindi per 200 gr di acido sia necessario circa 260 gr di bicarbonato, ho riscontrato che con questa ricetta si genera troppo residuo duro sul fondo che ho dovuto togliere martellandolo a lungo con un tubo sottile per frantumarlo in pezzi più piccoli. Pertanto suggerisco la ricetta precedente.

I recently invested in FZone’s CO2 Generator System, and I must say, I am thoroughly impressed! The setup process was straightforward, and the system is incredibly efficient. It delivers consistent, high-quality CO2 output, which has noticeably improved my plants’ growth. Since using this generator, I’ve seen healthier, more vibrant plants with stronger yields. The design of the system is user-friendly, with clear instructions and easy-to-understand controls. It also operates quietly and doesn’t require constant maintenance, which is a huge plus for me. The build quality feels solid, and I can tell that FZone has put a lot of thought into creating a durable, reliable product. I also appreciate the energy efficiency of the unit. It doesn’t consume excessive power, making it a cost-effective solution in the long run. Whether you’re a hobbyist or a professional grower, I highly recommend FZone’s CO2 Generator System for anyone looking to boost their plants’ growth and maximize their yields. Truly an excellent investment!

Ich habe mir das Gerät gekauft, um langfristig eine konventionelle CO2-Anlage zu ersetzen und die teuren Flaschenfüllungen und TÜV-Termine zu umgehen. Dazu habe ich gerechnet: Eine Füllung der FZone mit Natriumbicarbonat und Zitronensäure kostet etwa 2,50 Euro (beim Kauf der „Zutaten“ als Sackware und Verwendung in der 4-Liter-Version der FZone). Also auch noch in je einen 25 kg-Sack Natron und Zitronensäurepulver investiert … na ja, kann man ja auch sonst noch gut im Haushalt gebrauchen, das relativiert die hohe Anfangsinvestition etwas. Zum Gerät selber: Die Lieferung erfolgte vor dem angekündigten Termin, die Verpackung ist ordentlich und besteht fast ausschließlich aus Karton (Kunststoff wurde so gut es geht vermieden). Die Verarbeitung wirkt hochwertig und stabil. Das Ding kann man sich auch im Wohnzimmer neben das Aquarium stellen, wenn es z.B. nicht in den Unterschrank passt - mit Blasenzähler, Relais für die Nachtabschaltung und nach oben weggeführtem CO2-Schlauch baut das eher hoch. Das Netzteil für die Nachtabschaltung muss mit einem beiliegenden Adapter an kontinentaleuropäische Steckdosen angepasst werden - auch das geht einwandfrei. An der Nachtabschaltung befindet sich eine rote LED, die leuchtet, wenn die Anlage in Betrieb ist (das Relais angezogen hat). Das ist praktisch und sieht „stylisch“ aus - eine grüne LED (grün = „läuft“) hätte das Ganze noch getoppt. Die Angaben zur Menge von Natron und Zitronensäure sind in der beiliegenden Anleitung und auf dem Flaschenaufkleber unterschiedlich (aber auf Deutsch ;)). Ich habe den Mittelwert genommen und jeweils 700 g eingefüllt. Mit einer Küchenwaage und dem beiliegenden Messbecher ist das einfach. Da es sich bei beiden Substanzen auch um ungiftige „Hausmittel“ handelt, macht es nichts aus, wenn ein paar Krümel danebengehen. Es wird darauf hingewiesen, dass die Flasche nach dem Einfüllen des Wassers schnell verschlossen werden sollte. Ich habe deshalb mit einer starken Reaktion gerechnet, aber die Zeit reicht locker, um den Verschluss sauber aufzuschrauben. Die chemische Reaktion führt dazu, dass sich am Anfang bis zur Füllhöhe außen an der Flasche Kondenswasser bildet. Der Druck baut sich dann langsam auf, nach zwei bis drei Tagen sind trotz laufendem Betrieb 420 PSI erreicht (ca. 30 bar). Es vergehen etwa 12 Stunden, bis der Druck so groß ist, dass die Anlage läuft. Das alles lässt sich an den montierten Manometern gut ablesen. Mit der Druckangabe in PSI werde ich nicht warm, aber das ist Jammern auf hohem Niveau. Die Anzahl der CO2- Blasen, die ausströmen, kann sehr gut am Blasenzähler abgelesen werden. Die Regulierung ist sehr feinfühlig möglich und reagiert direkt, das kenne ich von meiner herkömmlichen Anlage anders. Die Nachtabschaltung funktioniert einwandfrei und dichtet komplett ab. Nachströmendes CO2 oder ähnliche Funktionsstörungen hat meine Anlage nicht. Also: Wer seinen CO2-Dünger fürs Aquarium selber herstellen möchte, eine hochwertig gemachte und einwandfrei und stabil laufende Anlage sucht und die zugegebenermaßen hohe Anfangsinvestition nicht scheut, kann hier zuschlagen. Man muss sich im Klaren sein, dass der Wechsel der „Zutaten“ Arbeit bedeutet (dieser Schritt hat bei mir 15 Minuten gedauert) und sich das Ganze nur auf lange Sicht rechnet. Erfahrungen, wie lange eine Füllung hält, habe ich noch nicht … im Moment ist seit einer knappen Woche kein Druckabfall zu erkennen und ich entnehme zwischen zwei und drei Blasen/Sekunde bei einer Laufzeit von 11 Stunden täglich. Ich hoffe, diese Rezension hilft euch weiter. Edit am 11.02.23: Die Anlage ist heute vier Wochen mit der ersten Füllung in Betrieb. Der Druck ist auf ein knappes Viertel des ursprünglichen Maximums gefallen - in den nächsten Tagen wird also eine Neubefüllung nötig werden. Ich halte mit der Anlage einen CO2-Wert von 20 mg/l in einem 260 Liter-Auarium konstant. Da finde ich eine Standzeit von vier Wochen+ akzeptabel. Positiv ist, dass bei fallendem Druck nicht nachreguliert werden muss, um die Anzahl der ausströmenden Blasen konstant zu halten. Der verbaute Druckminderer ist also auch von guter Qualität. Edit am 04.05.23: Inzwischen läuft an meinem zweiten Aquarium ebenfalls eine FZone. Das oben Geschriebene gilt auch für diese Anlage, die von einigen anderen Rezensenten beschriebenen Probleme tauchen auch hier nicht auf. Die Standzeit hat sich in beiden Anlagen auf 4,5 Wochen bei 20 mg CO2/l im 250 l-Becken eingependelt. Die Neubefüllung dauert jeweils zehn Minuten und ist zur Routine geworden. „Chemieunfälle“ gab es nicht, die Handhabung der Chemikalien ist mit ein wenig Sorgfalt problemlos. Nach Ablauf der chemischen Reaktion kann der Inhalt der Flasche im Ausguss entsorgt werden. Er ist ungiftig und reagiert nicht mehr. Tipp 1: Ein Trichter mit einem WEITEM Auslauf erleichtert die Befüllung mit Natron erheblich. Die Substanz ist sehr feinkörnig und rieselt schlecht, der beiliegende Trichter ist dafür ungeeignet. Die grobkörnige Zitronensäure macht das Problem nicht. Tipp 2: Wenn man die FZone-Flasche während des Betriebs ab und zu schwenkt, lösen sich Zitronensäure und Natron komplett auf. Das erleichtert die Reinigung der Flasche hinterher erheblich. Keine Sorge, es kommt durch das Schwenken nicht zu einer gesteigerten Reaktion mit Überdruck. Ich habe bei der ersten Füllung das Wasser nur zugegossen und die Flasche verschlossen. Die Folge waren große Verklumpungen, die beim Reinigen nicht durch die Flaschenöffnung passten. Auf die Standzeit hat das alles aber keine Auswirkungen.

Très bon produit, permet de faire un geste écologique. On ne jette plus les bouteilles vides. Très facile à régler. Le dispositif est assez grand, bien trouver sa place car peut-être un peu fragile. L’ensemble est esthétique et le rendu des bulles agréable. Pour ce qui des quantités, bien utiliser ceux inscrit sur le haut de la bouteille, 200 grammes et non ceux inscrit sur le site 300-400 grammes. Je n’avais mis que 300 grammes et j’étais dans la zone rouge, j’ai dû vider progressivement la bouteille et la surveiller pendant environ 24 heures avant stabilisation. Peut-être dû à la qualité des produits.

After carrying out a lot of research I decided this system would be the best bang for bucks system for my 120L system. I've been running the generator for 3 months now and I'm really impressed with it. It was easy to set up and the raw ingredients are cheap and easily purchased from Amazon. The powders are added and then the water is added very slowly with the bottle at a 45 degree angle. pouring it slowly slows down the chemical reaction and stops you wasting gas as you screw the regulator on to the bottle. I was getting 2 weeks of CO2 from one charge and when I added a CO2 reactor that figure went up to almost 4 weeks. 4 weeks of CO2 from 200g of acetic and 260g of Bi Carbonate is in my opinion amazing. The regulator is easy to adjust and the solenoid valve works as it should. The kit itself contains everything you need, except the raw materials and a drop checker. These can be picked up cheaply from Amazon. CO2 has made a big difference to my plants and algae growth is virtually zero now. This kit has been the best piece of kit I have bought for my aquarium in a long time. If you want to add CO2 to your system this is a great straight out of the box solution.