Marcy MD9010 Smith Cage Machine Linear Bearings Utility Weight Bench

OK, so delivery was earlier than stated, it comes on a pallet in 3 boxes. There are a lot of parts, some big some small. Don't expect this to be a quick job, took me all day and I am a Mechanical Engineer, but the end result was worth all the effort. The picture shows some chains for the cross fly's these are not included, but i went on to the suppliers web site and ordered for next to nothing. Am I happy with the package? yes very. Been using it every day and have cancelled my gym membership, will have a simple payback period of 2 years, so for me it will also save me money.

The loading pins at the back of the machine does not glide and gets caught all the time so you can't use the cables properly. It just stops moving and can cause a serious injury. I have tried wd40 to make it glide but it keeps getting caught so does not help. The only bit I can use is the Smith bar. Really angry considering how much this cost. It took 10 hours to put together and can't be used. Would give zero stars if I could.

First I'd suggest buying this equipment from Costco online. I orginally bought it from a "distributer" on Amazon, and when it arrived at my house it had a Costco Shipping label on it. I discovered the "distributor" had just purchased it from costco online and just had it shipped directly to me, all while charging me a couple hundred dollars profit. Costco.com offers it for $675 (without a costco membership there was a $30 service fee) with free shipping! At about 700 dollars this equipment is an awesome value. Assembly of the machine is a pain and time consuming (took me about 10 hours), but it is worth it at the end. I put it together completely by myself so if you are alone it can be done. The instructions were not bad, although they were vague at a few steps. I've been working out with this equipment for about two weeks now and I love it. It has exceeded even my high expectations. I recently moved to a more rural area with less gyms in the area. Plus, I work nights and like to workout later than most. Having the equipment in my basement has made it so convienent to workout I have zero excuses not to get to the gym. The versitility of this equipment makes it so much better than similarly prices home gyms that target only specific exercises like leg press, lat pull down, peck deck, and seated chess press. The equipment really stacks up against gym quality equipment. I don't know how it will hold up (as I've only had it two weeks), but the equipment feels very solid at this point. The bearings on the smith rack roll easily and freely. The cable exercises feel similar to exercises on equipment at a gym designed specifically for that one exercise. The pully system also offers enough resistance so that you don't have to try to completely overload it with weight. Between the uppper pullies and lower pully you can do so many different exercises (seated rows, standing cable curls, seated cable curls, skull crushers, tricep extensions, tricep kickbacks, overhead tricept extensions, peck-deck flies, cable cross overs, and the list goes on...). I have found I can change some minor things to make exercises work that I wouldn't have expected to be done on this equipment. For example I used to do standing lateral cable raises at the gym, but found the range of motion wasn't far enough on this equipment from the low pully. So instead I must do them seated. You can really come up with a ton of different excercises to do on this equipment. Someone in a different review commented that the lat pull down doesn't hold down your legs so it is useless. I have found that if you put the smith bar down on your legs and lock it into place using the pins for racking a free bar to the front of machine, it will hold your legs down. So again sometimes it takes just a small change to make an exercise work. When you add an olymic bar, a set of adjustable dumbells, and a pull-up bar to the mix, the list of things you can do includes nearly everything I would do at a gym. I guess the one shortfall of the equipment would be exercises for legs. The bench has the leg extension equipment on it, but the length of my legs make it diffcult to use. All in all if you are thinking about buying a home gym get this one!

Verry happy with it Takes some time to put it together but when done ausume machine Its a big and strong machine

I have some differences of opinion with some of the prior reviews so I'll just point out what appears to me to be the most important things. First let me say that there were a few things that might have caused me to rate this a 3 or 4, but I'm so impressed with the construction, I went ahead and gave it a 5 based on the final assembled product. Pros : 1) Very well constructed. The plastic olympic weight holders seem fine to me. This thing to me is built nearly as well as the commercial ones. I can't image ever having a problem with the stability or strength of the machine itself. 2) Comes with the bells and whistles. Attachments. I really just needed a smith machine for bench press, so I'm getting a lot more for a reasonable price. 3) Unlike what others have said, all three rails flow smoothly after applying some Heavy duty Silicone lubricant (in WD40 section of home improvement store). I first sprayed them down. Used a paper towel soaked with the spray to clean the circular and square rails. Then I spray the rails again without wiping it off. Moved the parts up and down the rails. There is no discernable catching/sticking on the cable system or the smith bar. 4) Bench comes with one of those screw in place holders, but it is spring based. Don't tighten it all the way, just tight enough to hold the bench. Then when you want to adjust, just pull the knob, and it will compress the spring, you can adjust the seat and then just let the knob go. No turning required. 5)I'm going to say construction again. It uses lots of plates/brackets to ensure no stress on the frame. Built like a tank. Cons: 1) Shipping. I'm going to break this down into several parts a) Amazon does not give the shipper your phone number which the shipper requires for delivery. b) CEVA (the shipper) sucks. They lost track of one of the boxes and delayed delivery because they had to find it and send it through. c) Delivery box not sturdy enough to hold 230 lbs in one of the three boxes. Box ripped apart before being delivered on one side. CEVA taped it up and brought it to my house. Kinda scary to think I might have to pay to send 400 lbs of stuff back, but from the other reviews, sounds like Impex is good about spare parts. One of my packages of bolts & screws fell out of the ripped box and delivery guy came back and gave it to me right before they left. Praise God! I ended up having all the parts. d) Two pieces of the bench had insignificant bends on the plates, 5 seconds with the hammer ironed that out. Funny thing is it wasn't from the ripped package e) Leg cushions have some indentations that probably won't come out, but I don't really care. It's small indentations. 2) Directions - While the directions seem to be much improved over the version the first reviewer had when he bought, there were one or two items that weren't exactly right/clear. Overall, it didn't really cause me to waste any time, pretty easy to figure it out from the pictures. The thing I really didn't like about the instructions, although it doesn't cause me much headache was that there was not a diagrammed parts list. There was a screws & bolts list. You could check the screws & bolts before getting started, but not the other parts. Just had to verify with the diagram for the step, which wasn't horrible. Just kinda scary not having a full pictoral parts list. FYI there is a text/word based parts index. 3) Build Time - Know how long it takes to build a tank? Very well constructed and you put in the time it takes to build a beautiful machine like this. Took me 9.5 hours for the machine and 2.5 hours for the bench...OK yes I was moving slowly by the time I got to the bench, but that's because my body was aching so much from the marathon effort the day before on the machine. BTW if you're even moderately coordinated this should not REQUIRE two people to put together. Summary: Overall I am very pleased. Everything functions as it should. If the delivery guy had not come back with my nuts & bolts before leaving, I probably would have rated this a 3 star. Final product meets all my expectations. I'm a happy customer.

I googled a LOT before settling on this machine and though I would have paid more for something more, this really seemed to have the most VALUE among a lot of options. I love puzzles so putting it together wasn't so bad as some reviewers have claimed but couple of tips: 1) open all three boxes, take the packaging off each piece of equipment so it's easier to find everything 2) you can go online and find the instructions for putting it together and print them out yourself - it's clearer than the instructions they send you AND you don't have to constantly flip back and forth between instructions and diagrams! :) 3) i didn't tighten ANYTHING until i was done building EVERYTHING. * I was very happy that as much as this machine has, it actually took up LESS space than I thought it would - which I'm super happy about * Like reviewers above said, the two stupid rubber things at the front of the bench come off everytime I move the bench. I just got the machine but I'm probably going to DUCT tape the bottom of each because that's ridiculous. * Like reviewers above said, the main weight holder/lever in back does NOT glide smoothly. I WD-40ed it first to not much avail. I went and got heavy duty grease which didn't do much at all. Not sure what to do next * Like reviewers above said, not sure WTF you're supposed to do with the LAT bar! * Like one review above said, I too was 4 washers light at the end! Had to run to home depot, no biggie * Like another reviewer above said, the screw clips are sort of a bug so i'll be off to get the push clips to more easily switch attachments * The bearings in the bench press actually make a good deal of noise. As i generally work out later at night when the house is asleep, this is sort of a bug * Some exercises run out of cables and the range of motion isn't so hot (crossovers, seated rows, so far) Despite the above, I'm not sure I would have expected more for $750. It has a ton of exercises. Sturdy as crap. Would purchase again. UPDATE: Okay, after a week with the product, a couple of updates: * There are definitely a lot of exercises to do with the LAT bar. Seated rows, lat pull downs (you have to adjust the chair though, and it wouldn't be very feasible with heavy weight without your thighs under a bar). * Other than bicep curl, it seems a little light on bicep exercises with good range of motion

I read review after review before finally pulling the trigger on this purchase. My wife wanted this machine and I was concerned about the size, the complexity, and the weight. First...the size. It is tall, wide, and long. You will also need to consider that you need about 2 feet on the three, non bench, sides to move weights. So when deciding where it will go, don't forget that fact. On the bench side...you will need even more. You will be moving the bench in and out and up and down and need some room to maneuver. We have about 6 feet in front of the machine and that seems to work well. We ended up with about a foot on one side and the back and while it works...it is not ideal. The last thing on this point...this is not a knock on the machine...it is just something to consider when purchasing. Next was the complexity of the machine. Using it is a breeze. My only complaint is that the two latches on the bench (for the seat back, and the curl pad) must be unscrewed and screwed back in. I saw this in other reviews and was willing to accept the annoyance. But know... it is not a 2 second operation...more like 30 seconds. Now...the real complexity with this machine is the assembly. I saw lots and lots of negative comments about it. But also lots and lots of helpful hints. I will condense several of those and few of my own here. First...this thing comes in three, big, boxes. They are heavy. You will need to inspect them when they arrive for damage and don't accept them if you notice any or if any of the boxes are heavily damaged or have been ripped open. Once you have ownership of the boxes...carefully unpack them and sort the pieces. In my case, I matched each part with the picture in the construction manual and put a small round sticker with the part number on each. ***If you have one take away from my construction story...this should be it...take the time to organize and label your parts. It will pay off in spades as you work. The hardware was packaged well and labeled on cardboard packages and was very easy to work with. Take your time. Understand what you plan to do...get all the parts ready...ensure you understand your goal and then proceed with each step. You will do much better if you have someone to help you. Sometimes, just someone holding a large bar in place will save you a ton of time. Start by assembling the bench. It is fairly straight forward and you will learn a lot before you get into the bigger pieces. The super structure is straight forward and is just bulky...this is where the second person really comes in handy. Make sure you have everything lined up and bolts in before you tighten the bolts. In some cases you simply need the "wiggle" room to get thing to fit. In any case...the most complex and confusing part is the cables. Three hints here. 1. Take all the time you need to logically work out what they are trying to do. It is complicated and involves multiple fly wheels in one, very complex, mechanism. It was not until I was finished that I understood how it was going to work. The part that can get very confusing is the long cable that goes through the part with two wheels side by side. Really study the picture and understand the direction of the cable as it goes through. This is the part you will get backwards if not very careful. 2. In the Owners guide, they give you the same pictures as the construction guide, but they add words for the cabling. Read this. It helps a little. 3. Do not tighten everything up, for a step, until you are 100% sure you have it right. This will save you a lot of heartache later! In the end, it took my wife and I about 90 minutes to label everything and about 7 hours, spread over 3 days, to finish construction. I used a pair of pliers, a rubber mallet, and a socket set. Those were the only tools I needed to provide...the allen wrenches were included with the hardware. The last area to consider is the weight of this machine. I live in a house that was built in the early 60's with wood construction. This would not fit in our basement so it had to go on the first level. I was concerned. About 400lbs of machine...say...another 200lbs of weights...and then me ~300lbs and possibly my wife...(no weight here...I am not a rookie husband)! But we are easily pushing 1000lbs. Hmmm...should I be worried? Yes. So I called a friend of mine who was a contractor in my neighborhood (so knew our houses). He told me it was not a problem. He said...think about a bedroom set with a water bed. Four contact points and well over 1000lbs. Fair enough. This machine has the footprint of a small bed...and the feet are actually wider than that of a water bed. There is also a fifth foot under the rear weight assembly. So that concern was negated. We installed it...have about 150lbs of weights and not a creak can be heard from the floor. So no problems there. In the end...we love our machine. We use WD40 on back post and on the posts for the bar bearings. We also make sure the cables are not kinked. We adjusted the tension on the cables after the first week (see the owners maual for how), and have added some padding to keep from banging heads and legs on things. The quality is good and machine is sturdy and works as advertised. I highly recommend this machine and look forward to updating my review after we have used it for a year (to give you an idea on wear).