KOLIPI Acrylic Display Case for Collectibles, Clear Display Box 6x6x8 in

This was actually better than I expected after reading some of the reviews here. Assembly was not nearly as difficult and the instructions were relatively clear to understand (mostly). The panels are a little thin but for the price it’s to be expected. Beware these scratch super easy so place them on a blanket or soft surface after pulling off the film. I used Sprayway Glass Cleaner on all my cases and it doesn’t leave a film leaving it super clear. The film was easy to remove just gotta use your nail to scratch away a little corner. Great value for your money. Here’s some tips for solo assembly: 1. Place the pins into the sleeves before you start. Don’t click them just slide them all together. This will make it so much easier sliding them together into the holes. 2. Assemble this upside down. Don’t place it into the base first it’ll be a nightmare. 3. Pay attention to the notches on the bottoms of each panel single notches are front and back panels and double notches are left and right panels. 4. Pushing the pins in requires some force. So careful pushing them in and use leverage on the inside with one finger. 5. The instructions don’t mention this but the connecting arm for every corner and all sides are placed on the inside of the panels and the pins push through the outside of the panels. Total assembly time took around 10-15 mins for me. Forget the gloves just wipe it down after. Would buy again for sure.

It's not bad. Okay it doesn't come with everything you need to put it together. Clear instructions if you don't have a brain dead moment like I did, but still clear instructions. Even comes with fairly nice gloves to put it together and not leave fingerprints during the assembling process. Size is just right for what I wanted it for VERY happy about that. The storage capacity I personally put with the size and it is just right. Gives some space without being to much exactly what I was looking for there. I honestly didn't need/want the lighting so I have it but it's not in the case nor do I want it in the case so I can't say anything about the lighting. Also I didn't think adding the lighting would allow for it to remain as sealed as it should be, so that was another reason for not adding the lighting. Also worried what the lighting might do to the item(s) inside, so also a reason I didn't add them. As for protecting the item within from dust and such. I'm not sure. It might work it might not can't really say, but I think probably it will. It seems that the edges are fairly tight so should do well protecting whatever is inside. It does take some time to put it together, and pulling off the protective plastic from the inside first seems to be the smarter way to go. Also remembering to pull off the plastic before you connect the pieces is helpful. Though I forgot on two sizes luckily it didn't seem to leave any behind when I finally noticed and pulled off the plastic after, so that was a relief.

If you're between this model and the case with slots, get this one it's way better. If you read the assembly is hard, that's a lie. I had mine together in about 10 minutes, it comes with a little USB string of led lights, I didn't use mine but saved them for later, gloves, and plenty of extra bits just in case. The case itself looks good, very clear. Once assembled its sturdy, survived a car ride and a little rough handling. The acrylic is easy to scratch though, so be gentle with anything metal. And it's a dust MAGNET, so pick a clean area and wear the gloves. The only down sides were I would prefer a gloss base, mine was matte and the case can't be secured to the base. But a little work around, you can push the extra pegs included into the gap the case slides into the base. They're the perfect size to lock it in and then have feet on the bottom. It even includes stretchy cotton gloves, i didn't think they'd fit my XL hands but they made it enough to handle assembly without fingerprints.

Nice display box for the price. Not great, but more than adequate. Assembly was simple and I did get the extra parts included. Minus one star because this acrylic is super soft and scratches very easy. My fingernail rubbed on it while getting some fingerprints off and it put a permanent scratch on the acrylic. Really? My fingernail. So be very careful and easy when cleaning and this case should be fine.

Cool display case.. works well. A little tricky to setup.

Easy solution to protecting an object with minimal cost. Have a UGEAR clock that I wanted to cover. A glass dome was expensive, and I found this product. Perfect! It took about 30 minutes to assemble. Instructions were detailed enough and the quality of the pieces and box that it came in were great. The instructions said to start with the top panel first. I worked on a granite countertop (hard surface and clean to keep the panels from getting marked. I put the corner pieces on top and put the pin through the sleeve and put them through the hole in the top panel from the bottom and set it down on the counter and pressed down until I heard the snap. After completing that I took the side panel and installed the angle pieces in the same manner leaving the holes that would join with the top panel empty. Mated the side panel to the top piece and used the side of a butter knife to press the pin in until it snapped. Continued on until it was done. Kit came with cotton gloves, a wipe, and additional plastic joining pieces. It looks great! The panel holes lined up and there are no gapes between the panels. It fits in the base great and it serves the purpose well. Would buy another without reservation.

After a recent trip to Japan, I learned that the artist who made my Hakata Ningyo has retired. Further, the wood base that my doll came with 7 years ago also needed to be replaced, so I decided to look for new stand and base for her. this case is decent, and sturdy, but it's far from perfect. The top part of the case had a noticeable scratch the second I took the plastic wrap off, and the wooden base at the bottom had a few scratches on one side, and A LOT of scratches on the side that isn't visible. Assembly needs to be done carefully. I'm not the most handy guy, but it took me about 1 hour to put the case together because I wanted to handle everything delicately. Overall, the main reason I needed this case was to protect my now irreplaceable Japanese doll, which so far it's doing, but if you want really quality, this is mid tier at best in my opinion.

It’s nice to for displaying your work, not very effective for dust. I still have to open the case and clean my cat. I do have to be EXTREMELY CAREFUL! The lid is flimsy, but my Cat looks great. For the price it’s a plus you get what you pay for.

La calidad es buena, los paneles no cierran herméticos, pero si protegen del polvo, el ensamble es muy sencillo y vienen muy bien protegidos con sus plásticos Al principio parece que no son traslucidos pero, vienen muy bien pegados y por los dos lados. Buena caja por el precio

Excelente ,fácil de armar

dont buy this all the pins and holes dont match BIG scam and waste of money

La vitrina la compré para posar la figura Hot Toys de la Bruja Escarlata cuya escalada es de 1/6 pulgadas y quedó excelente. -El producto venía bien embalado, las instrucciones son en inglés y entendibles. Además de que no es difícil de armarla. -Viene con unas luces que no son la gran cosa. -El plástico es bueno para el precio, pero sí tiende a rayarse fácilmente. Si quieres una vitrina para figuras escala 1/6 a buen precio es una excelente opción mientras ahorras para alguna mejor. Además de que sí protege del polvo.

A bit expensive, but good quality