13"OD x 3 1/2"ID x 1 1/4"P Traditional Thermoformed PVC Ceiling Medallion (Fits Canopies up to 7 1/2")

This is a high-quality escutcheon cover-up plate for a ceiling light at a great price! We replaced an old ceiling-mount "boob" light that had a 12-inch diameter, with a chandelier that had only a 3-1/2-inch canopy. Of course there was a ceiling paint ring around the old boob light because of the different amount of paint fading that had occurred over the years. Rather than repainting the entire ceiling, this simple escutcheon canopy looked like a good option. It is not clear from the description, but others have noted that you get two for this price. What seems odd is that, especially as you get two, it much less expensive than most others on Amazon. I have installed several other escutcheon plates and this was of equal quality to others that I had spent more for. Further, the thickness of the plastic is quite good and I found that the plate easily supports it own weight, meaning that it does not sag and it really doesn't require any glue or caulk to hold it in place. It looks quite nice as well. For installation, you just slide it up around, or slightly over, your electrical box and fixture and any mounting screws, and then use your light fixture's canopy to hold the escutcheon plate in place. I found that I needed to notch out some of the plate's plastic under the canopy to allow the mounting screws for my light fixture to hang down properly but that is easy enough to do with a drill or just a razor knife. Once the light-fixture canopy is screwed up into place the escutcheon plate stays in place nicely just by friction. Because of the stiffness of the plastic, the plate mounts easily and there is no gap between the ceiling and the edges of the plate. We have white ceilings, so I am using this unpainted and it looks fine. However, our ceiling paint is flat, and this escutcheon plate has a slight semi-gloss white appearance. If i ever get out my ceiling paint, I may paint it in place. But for now it looks great and it nicely complements our new light fixture.

Perfect for a bedroom fan light fixture or small entryway fixture.

Arrived fast. Good price. It's cute. But you can tell It's plastic. It isn't thaaat thin as a plate, but it's a bit thin. It isn't easy to cut it.

Product came quick and was exactly as described. Might paint bronze, we will see.

I got the 13" version of this, which is an unusual size for medallions as far as I can tell. I wanted a simple medallion to cover up some ~11 spots where previous fixtures had been mounted several decades ago. They work and do what I need, but not without some problems. The good things: -Simple looking, they match modern fixtures well without overpowering the fixture with a bunch of detail work. -Inexpensive. The not-so-good things: -The outer lip is quite large, if you are mounting something that has set screws close to the ceiling there is a good chance that the lip will obstruct access to the set screw. -Inexpensive: They are thin and I could see them breaking if you aren't careful with them. You'd have to be fairly careless though. -Flexible: For something meant to lay flat against a ceiling they have a lot of flex and little surface area for adhesive. Be prepared to either use an expanding adhesive that can fill the channels or have another clever solution. Expect to use some sort of gap sealant around the outer edge when you are done to cover up any gaps (you should do this anyway for medallions regardless of gaps, but it's especially important here). In summary, they work if you know what you are buying and are willing to do the fit and finish properly. Solidly average.

Description is just how stated. It's a nice medallion for the price, what can I say??? I can't tell the difference between this and a $50. item. Why spend more. It is plastic. It's not like anyone is going to point it out. There is plenty of room for the Liquid Nails to hold it up until the canopy can secure it. I did paint it with a flat white as is my ceiling. H.D. has small sample size paints for $7.00. You can pick finish and color to whatever you like. Easy, BUT tricky working by myself, overhead, 9' up a ladder, wiring a chandelier in tow. Take time. Be patient. It's not a "I'll get it done it 10 min" project.

Oh boy, where do I even begin with the Ekena Millwork CMP16TR Traditional Ceiling Medallion? Buckle up, folks, because I have a tale to tell. This seemingly innocent decorative piece turned my home improvement project into a comedy of errors. Get ready for a rollercoaster ride of hilariously disastrous moments and questionable craftsmanship. Brace yourselves for the review you never knew you needed! Product Description and Expectations: The Ekena Millwork CMP16TR Traditional Ceiling Medallion claims to be a stunning addition to any room, promising to add a touch of elegance and sophistication. The description had me envisioning a seamless installation process, exceptional craftsmanship, and a final result that would leave me and my guests in awe. Little did I know that the reality would be quite the opposite. Unpacking the Medallion: As I eagerly unwrapped the package containing the CMP16TR Ceiling Medallion, my excitement quickly turned into confusion. The unfinished surface appeared rough and poorly sanded, resembling a piece of wood that had been gnawed on by a family of beavers. I couldn't help but wonder if I had received a defective unit or if this was the quality Ekena Millwork proudly stood by. Installation Woes: With a determined spirit and a bucket full of optimism, I embarked on the installation process. Little did I know that I was about to face a series of trials and tribulations that would test my patience to the extreme. The pre-drilled holes on the medallion were misaligned, resembling a constellation in the night sky rather than a logical pattern for mounting. As I attempted to align the medallion with the electrical box on my ceiling, it became evident that the dimensions provided were misleading. The 16" outer diameter was not accurate, leaving an unsightly gap between the medallion and the ceiling. It was as if Ekena Millwork believed that gaps were the latest trend in home decor. Craftsmanship Quirks: Now, let's talk about the craftsmanship—or should I say, lack thereof. The intricate design, which was supposed to be the medallion's centerpiece, was riddled with imperfections. It looked as if a blindfolded monkey had attempted to etch a pattern into the surface. It was truly a masterpiece of chaos, with uneven lines and random dents that added an unintentional "modern abstract" touch. To make matters worse, the edges of the medallion were jagged and unfinished. It felt as though they had been chewed on by a pack of feral cats. I couldn't help but wonder if Ekena Millwork had outsourced the production to a team of deranged beavers and cats. Painting Nightmares: In a desperate attempt to salvage the medallion, I decided to paint it. Little did I know that my decision would lead to further misfortune. The surface of the medallion, despite being advertised as "paint-ready," proved to be a nightmare to work with. The wood absorbed the paint unevenly, creating an amateurish result that screamed, "This person should never be allowed near a paintbrush." Mounting Madness: As if the misalignment and poor craftsmanship weren't enough, the mounting process turned into a comedy routine worthy of a prime-time sitcom. The screws provided by Ekena Millwork were about as effective as wet noodles, stripping and breaking at the slightest hint of pressure. It was as if they were made of melted plastic, rather than the sturdy metal one would expect. After several failed attempts at mounting the medallion, I resorted to my trusty collection of expletives. My neighbors probably thought I had enrolled in a sailor's academy. The only silver lining in this farce was the entertainment it provided for those who happened to witness my mounting madness. Conclusion: In all my years of home improvement projects, I have never encountered a product as hilariously disastrous as the Ekena Millwork CMP16TR Traditional Ceiling Medallion. From the rough surface to the misaligned holes, shoddy craftsmanship to uneven painting results, and a mounting process that bordered on absurdity, this medallion failed to live up to even the lowest of expectations. If you're looking for a good laugh and a cautionary tale to share with friends, by all means, go ahead and purchase the CMP16TR. But if you're seeking a high-quality ceiling medallion that will enhance the beauty of your home, I implore you to steer clear of this calamity of a product.

Worked as advertised

É perfeito! E dá pra colar com uma fita dupla face de tão leve

Me encantaron. Son muy ligeros y fáciles de instalar.

Amazing! Worked PERFECTLY to cover the old light fixture outline in the ceiling. Added a classy touch to my beautiful glass chandelier!

Way too flimsy. For the price I expected something more sturdy. It was a great colour and shape/pattern and would have looked great - but I returned it.

Exactly what we needed