Ambient Light Rejecting (ALR) Projector Screen for Ultra Short Throw(UST) Projector, 100" Fixed Frame, 80% Picture Quality Improved, 95% Celling Light Rejecting(CLR), Active 3D-C100

I originally bought the AWOL LTV-3000 without a screen as I was unsure about going for either a 100 or 120-inch screen. After projecting onto my white wall, I found that ‘bigger is better’ so I then bought the 120” ALR screen. Although I have a dedicated room, I was unable to go any larger due to space constraints but 120 inch is much larger than you would imagine. Although the wall worked in darkness, there was a lot of reflected light on the ceiling and other walls and the picture became washed out with the curtains open. Although the screen assembly may seem a bit daunting, in practice it is not difficult as long as you have enough space to lay the screen out and get all around it and, more importantly, you take your time and follow the instructions. It is definitely a two person job to hang it The difference to the wall is a definite improvement. The screen allows daytime viewing with the curtains open and in the dark, it is a true cinematic experience. Both 4k Blu-ray player and 720p content from the firestick is stunning and well worth the investment for the true ‘home cinema’ experience.

This is a premium product and priced as such. But if you're buying a UTS projector then you already know what you're getting yourself into. Setup isn't to be rushed. Take your time and follow the instructions carefully to ensure you align everything properly and don't have any inconsistencies in the screen. It's a good idea to clear a space larger than the screen before beginning setup. Picture quality is top notch for a projector screen. It's almost as good as a quality OLED... Almost. I think it looks best in a low light environment but the ALR technology will do a good job at making it look good in almost any environment.

Pretty difficult to install and get lined up correctly with your short throw projector but well worth it! It looks like a normal TV.

I bought the 120" ALR screen for AWOL VISION AU Direct. This came from China and arrived on time. Unfortunately the screen material did come with wrinkles across. The seller gave tips to rectify but unfortunately they didn't work. They didn't hesitate and sent out a new screen material, which was flawless. I also didn't have to send back the old screen. The seller was always in contact throughout the whole process. Always replied within 24 hours but usually quicker. I was kept up to date, and they made sure I ended up with a product I was happy with. Shout out to Winni, who looked after me. The product itself seems well built. Good viewing angles, and makes the projector watchable during the day. Instructions are ok. They did offer a video call service in case I needed further help, but I never used it. The wall brackets are flexible enough to place, so should suit most wall setups. The brackets also allow for some adjustments, if you only put one screw in, so you can make sure your frame is level before putting the second screw.

We have a dedicated theater room on the lower level of our home and previously projected onto the wall painted with special paint from our 3D projector. It worked great but even low lighting would seriously detract from the viewing experience. This was a problem for our youngest who is 7 yrs old and gets scared having it completely dark. When I saw this projector screen I was pumped to try it out because it has a larger viewing angle and a higher light rejection percentage. The installation can be tricky on your own (at least for someone spatially-challenged like me) partially due to the nature of the build as well as the instructions not being great. Fortunately my cross-level laser and a second pair of hands were a life-saver. You absolutely must install this with proper alignment. I read through other reviewer's experiences and took careful notes. I used a large space for assembly (we have an open concept walk-out basement) and laid it all out to take stock of all the parts first. After reading the instructions on a dry run we then did the full assembly. As another reviewer put it "It's easy but not simple" and it really does require careful attention to avoid rippling. Once that was done it was easy to set up. I don't have their personal brand of short throw projector, I have a mid-level one from another brand. I would love to invest in one of their projectors but it's not in my budget just yet however I was still able to have a good viewing experience with the screen. It is crisp, clear and vivid but it still has a hint of projector look to it. Having said that this is the best home projector screen I have seen in person and it by no means is low quality. It is really a great screen and it will be coming to the new house in a few months. Note: once assembled I could not fathom trying to disassemble and re-assemble this screen so it will be transported in one piece (thank goodness for walk-out basements with high ceilings and double doors.) Overall an excellent investment if you have a dedicated viewing area and the right projector

We bought this with the Awol 3000 projector and we are very happy with our purchase! Good picture during the day with light coming in the window. It was tricky to put the screen on the frame. I suggest finding a YouTube video and having two people work together and do opposite sides at the same time.