SOULWIT Ear Cushions for Jabra Evolve 65/20/30/40 - Black

Had to get this for my office headphones. One of the original coverings had split at the edges and the sponge was poking out. My efforts to use special mobile sealing glue to stick it back was disastrous as i had used cellotape to secure the outer covering and on removing the tape after the glue dried caused the surface of the covering to slightly rip. Hence analyzed various options available on Amazon and finalized this one. Only major con of this product is the relatively high price(₹1280), specially for me as i needed only one. Product quality seems at par with original. I tried following the instructions in the pamphlet but i was unable to remove the original cushion as it seems firmly stuck. Hence i replaced only the outer covering. If its visible in the last pic, i have changed only the left one. The right one is still the original. It takes some effort to slowly attach the outer covering, almost like fitting a tyre. You have to coax the covering slowly around the plastic by holding down one point and going around the the circle while pulling incrementally so as not to break the edge.

cover is Perfect fit and appearance that looks just like new. sponge provided is of no use as old one is still good and better quality than this one. Feel price is on higher side.

Good quality of cushion and cover.

Good quality, I was able to replace damaged / earlier cushions with these new ones, they are comfotable to wear. Will buy again if another headset needs attention. Highly recommended.

One of the worst product , lowest quality

Headset is looking new after applying the cushion.

Indeed it's not og jabra. Okay quality. Poor packing. Good fitting as original Jabra. Durability not sure. You will hear louder than original Jabra.

Overall happy with the purchase, worked well with my Jabra headset although they are a little bit bigger in size ( to be fair I am using a different version not the one mentioned in the product description) Well removing the old leather cover and sponge is a hassle and installing the new one is a bit tricky, in a way how they have packaged the product. I had to watch a youtube video to understand the correct installation process, the steps they provide are insufficient. Anyays the trick is 1] Remove old ear pads 2] clean the sticky sponge residue 3] Apply the 3m tape ( this part is tricky, so first remove the tape with the 3m cover and apply it, later remove the 3m cover ) 4] remove the sponge from inside the leather and just appy the sponge on the 3m tape 5] then apply the leather cover in the end. If you try to put the sponge and leather cover together, the way they have packaged it, you will waste lot of time

these were very well designed and the instructions were easy to follow. this now allows me to get more life out of the headsets

High quality! Easy to install! Looks original!

Zeer goede pasvorm, goed materiaal en eenvoudig te plaatsen. Ben blij met het resultaat

É muito bom ! Recomendo

It seems like a decent replacement will need to see how long it lasts