for PS5 Analog Stick Replacement for Sony PlayStation 5 PS5 Joysticks Replacement 3D Joystick Sensor Module Thumbstick Controller Accessory Part with Kit(4Pack)

Working great, but not easy to replace them. RoHs solder has a higher melting temperature which makes desoldering more difficult. Ended up cutting the leads with flush cutter, then desoldering individual leads. Use tin-lead solder when soldering them. Save ~$60 bucks fir a new PS5 controller.

Worked very well for its purpose. NOTE: To fix the drift issues, I only needed to remove the tiny white plastic piece with the little spring inside the potentiometer (see photo) and replace it with the ones in my controller. I DID NOT HAVE TO SOLDER ANYTHING This set is great, because it comes with several extra just in case I need to fix it again in the future.

If you don't want to desolder the joysticks from your PS5 controller's PCB, there's actually quite an easy solution! Stick drift for the PS5 is generally caused by the potentiometers wearing down. They are little white discs with metal rings sitting inside the pictured green housings. With a gentle prying tool and tweezers, you can easily remove the old potentiometers from your PS5 and replace them with new ones from this kit. This is how I fixed two PS5 controllers I got off eBay, and now they're good as new. No soldering needed!

Replace the sticks on my controller but one of these still has some drift, I'll have to replace again, it's not much but still noticeable. The other is working perfectly, so 50/50 so far, I'll update the review when I have a chance to replace the drifting one.

Tools are great; replacement joysticks feel great and work well (so far). My left joystick cover was torn up and needed to be replaced. The tweezer tool proved to be really effective, and the magnetic screwdriver was handy. The instructions are straightforward, although I also consulted a YouTube video for visual guidance. Note that not all controllers may be exactly the same with the color of the wiring behind the battery pack. Took me about 20 minutes and I’m normally awful with DIY.

I installed them properly but did not fix stick drift. I am still experiencing stick drink on left stick at +4 and right stick at +9. Better than what the old ones but not as close to zero as I was expecting. I already installed them so I cannot return and I am not removing just to return. These should be tested before sold to guarantee quality. I would not buy again that is for sure.

Saves money rather than buying a new controller. Actually changing these is more difficult than I thought though, it involves soldering wires on.

It works good. Just need someone good at soldering because to replace it you need to solder