OAM-T1732 T1732 Adjustable Expandable Gravity Wheel Conveyor Flexible Table, Red

There aren’t any current reviews, so I thought I’d throw in my comments...The package arrived in perfect condition. The box from the Chinese manufacturer had the edges reinforced by the seller and then overwrapped with stretch plastic film. The additional protection was more than sufficient for it to withstand the rigors of UPS.The roller stand was in perfect condition. No rust spots, as reported by another reviewer. Nothing was bent or broken and the bolts to attach the legs were all present. The rollers all turn smoothly...basically it’s exactly as you’d expect.

These are perfect for what we needed them for. They really are quite heavy and well made. And the packaging they were shipped in was quite adequate and they arrived in great condition. We are very pleased with our purchase.

This is a heavy product shipped in a lightweight box. It was dropped several times during shipment. Fortunately I can fix things and have made it work. I can't, however, fix the roller problem.

The packaging for this product is totally inadequate. The box had broken open, and UPS repackaged it. They use collapsed UPS shipping boxes on the inside of the original shipping box to stiffen it. They also added a lot of paper cushioning. Three of the four brackets where the legs and cross members attach were bent. Two were very badly bent. I had to use a pry bar, pipe wrench, and other tools to straighten them. Even then, I had to use three foot long wood clamps and "C" clamps to get items to align so I could get the bolts through the holes. Luckily, the bolts, nuts, and washers were still in the box. There were no assembly instructions. It was not hard to figure out how to put it together. If the brackets had not been bent, it would have taken 20 minustes to assemble this. As it was, it took almost 2 hours. The product description on Amazon, states that the height is adjustable to 39 1/2 inches. I am using this on the feed side of my 39 inch high table saw to feed plywood sheets. At that height, there is not much of the legs left in the tubular housings, and the legs do not remain plumb. They angle in. A second retention bolt/knob on an adjacent side of each leg would help. For the price it is okay.

So pleased with this product. Works just as well as advertised. Sturdy construction, easy to expand. Height adjustment easy to set. A great buy!

Hard to open and close...

I usually don't bother to rate everything, but was somewhat disappointed in this table. First, the box was split open and the small parts (washers, bolts) were all loose inside the box. I found all the bolts, but not all the washers, some must have spilled out, so replaced them with some from my shop. Next, one of the bolts on the end of the scissor-like mechanism was missing. It was metric, so off to the local hardware store for a new one. The head I got was a different hex diameter than the bolts supplied, but the threads match, so okay. Once I finally got this together and removed all the oil from the outside of the rollers (because I use this as an variable length outfeed for my table saw), the roller table works well. There are 2 other virtually identical products available on the web, both higher priced, but I would expect that they would also be higher quality. For the price, this is a pretty good table, but expect to work on it when you get it because their assembly and finish quality is not good.

We been using it for a while now, and it just seems that the legs are getting weaker and weaker. Kind of hard to get all four corners even adjusted. Even so it will eventually lower down... I suppose for the price this is acceptable product