WEN 4208T 2.3-Amp 8-Inch 5-Speed Cast Iron Benchtop Drill Press,Black/Orange

Me gustó mucho a veces necesito hacer agujeros precisos e hice una prueba, atravesé un taquete por completo para ver el resultado por el otro lado y quedó a exacto a 90°

Not good quality, motor is smoking

Got this recently as part of a package deal (with the WEN 1x30 belt and disc combo sander) for hobbies and general home use. It is quiet, easily operated and has the speed adjustments I need for my stuff at home. It came needing assembly with the needed almost all the tools, and very clear directions for getting this done. Parts made of exposed metal came treated with either oil or cosmoline (smells soooo good) and these need to be cleaned off. The user manual advises acetone or similar cleaner for this. Setting up out of the box: The user needs to attach the press tower to the powder-coated cast-iron base (using your own wrench), the cast and machined-flat table to the press tower, and the drive assembly to the top of the tower. Once this is complete, the user needs to clean the mating surfaces of the chuck and spindle, then use a hammer to attach the chuck onto the spindle. I did this, tested the trueness of my chuck assembly, and discovered some wobble. A couple more medium whacks with the hammer, and the chuck was set nice and true. The table on mine was not squared to the drill bit axis. I used a long Philips screwdriver stuck in the chuck, handle side down, with a small carpenter's square, to get the left-to-right (X-axis) alignment correct. The indicators for degrees of tilt on the table should not be trusted out of the box. Luckily, the table is square front to back (Y-axis), as this is not adjustable on this model. I then adjusted the pulleys to the lowest speed, easily done with no tools. My impressions: Once set up, I was able to rattle off several small home and hobby projects that had been held up due to needing good, 90-degree holes made, including counter-sinking, using the chuck stop on the left side of the press. Get yourself some small C-clamps for holding work steady on the table (different hardnesses in the wood grain can can make pull your project out of alignment) and supply your own work light to shine on the project area, as one is not included with this model. *For the money* this is a good little beginner drill press that has met and, in some cases exceeded, my expectations. If you want more bells, whistles and convenience, spend more on another more expensive model. For occasional home and hobby uses, this is a great little press.

Excellent quality drill. Fit and finish exceeded my expectations for the price. Parts nicely machined and drill functions exceptionally well. Perfect sized drill press for garage workbench. Doesn’t take up too much space compared to larger sized drill presses. Highly recommended for homeowner/handyman use.

not happy with this equipment my address is clear UAE and yet they delivered 120 volts