Spigen Tempered Glass Screen Protector [GlasTR EZ FIT] Designed for Galaxy Tab S9 Plus/Galaxy Tab S10 Plus [9H Hardness/Case-Friendly]

I loved my DOTTO tablet protector case and it’s an upgraded design from a version I bought for an older Samsung Tablet. My DOTTO tablet protective case was very durable and functional. I would highly recommend purchasing this larger protective case to help protect the 12.4 inch tablet’s glass located all along the entire front of my Samsung Tablet S9+. The DOTTO Case was easy to install successfully on the very first attempt. Due to the great construction and design, the case provides 2 ways to ensure that the Samsung Pen stays with the tablet if you use the Tablet Case’s special made slot holder located on the inside frame of the case. This special holder ensures the pen stays in the specially designed holder when the screen case is closed. It also has an elastic covering on the back of the tablet which holds the tablet pen in place on the tablet to charge it and an elastic band that slides over the case cover making sure the cover remains closed and the tablet pen remains securely in place. When I used this case with its three different securing features for my tablet’s pen, I don’t worry continually about losing the pen since the tablet only has a magnet to keep it on the back of the tablet and the pen is easily knocked away from the magnetic area if bumped or brushed while it is being used or being stored away.I liked how this case felt holding it using just one hand or being able to watch a movie almost completely hands free when I use the case to hold the tablet for me in a landscape viewing position.In addition to a tablet protector case like this one, I have generally always used Spigen tempered glass screen protectors on my tablets and cellphones to prevent any portion of my electronic device’s glass coverings from being chipped, cracked, deeply nicked, lightly or deeply scratched due to accidentally dropping the tablet or dropping something sharps or sharp and heavy onto it. A tablet glass surface protector made from a 9H rated tempered glass is an important tool which I have always used to prevent glass damage to any of my tablets or cellphone purchases. My Spigen glass screen protector may have cracked or broken due to accidentally dropping it or dropping something on the glass protector. However, my Spigen glass screen protectors have always successfully prevented the glass installed on my devices from ever being damaged. Instead of the device glass being broken or damaged, the glass screen protectors I always ensured were installed prior to using the electronic devices. Whenever I saw possible damage, the Spigen glass screen protector may have cracked, chipped or been scratched. However, my tablets and cellphones never had any damage to the device’s installed glass areas appear underneath the glass protector or elsewhere due to how well the Spigen screen protector worked. No damage could be seen underneath the screen protector after it had been removed to install a new replacement screen protector. Screen protectors have saved me a great amount of money due to not needing to replace my device’s screen whenever it was dropped or had something have or sharp dropped on top of it.If you are considering a screen protector for a tablet or cellphone, I also highly recommend purchasing a Spigen GLASTR EZ FIT glass screen protector to protect the tablet glass from easily cracking. The EZ FIT is easy to install and has a high 9H surface hardness rating which is the most desirable surface hardness rating level for protection from cracks, scratches and smudges. It has an oleophobic coating that most definitely helps with fingerprint and fingerprint smudge removal. The screen protector comes with an alignment tray which tremendously helps to easily and correctly install this very, very large glass screen protector. Without the glass cleaner, alignment installation tray, dust catching stickers, squeegee, installation video and well written instructions with detailed pictures and the microfiber cleaning cloth, whole installation process would have been difficult to complete successfully in one try

Whenever I buy a new phone or tablet, I don't think twice about which screen protector to get. Spigen is my go-to choice always. It is not film but a layer of robust glass. The installation is precise yet so simple. If you received a defective protector, they will send you a replacement. I only needed to show them where it was scratched and no other questions asked. The protector screen keeps the table looking new and fresh. I just need to wipe off finger prints every now and then. Highly recommended.

It seems simply enough with it's mounting tool which have notches on each side to ensure even placement, childproof right? But once you pull off the backing and attempt to apply that is it, you do it wrong or you do it right. I tried my best but it applied off center. I also could not get the many bubbles out no matter what. I was able to peel it off but trying to apply it again would have been useless as it now had finger prints and dust. In anger I yelled G@d damnit and snapped the whole thing in half and threw it in the garbage.Buy something less high speed and easier to install. This is for people who are good at messing with touchy stuff. That's not going to be most of us.

I've put many of these on various phones and smaller tablets with uniformly excellent results, but admit some trepidation about one as large as this one for a 10" tablet. Turned out to be the easiest yet and a literally perfect installation. Upon running my finger the length of the glass per the directions it slowly "attracted" itself to the screen all the way to the edges, leaving only a half dozen small bubbles at the edges. I touched each bubble and it was complete, aligned with exactly the same margin around all four sides and not a trace of anything between the screen and protector.FWIW, I follow a process to try and minimize dust that so far seems to be working. First, pick a time I'm the only creature moving in the house. Turn off the central air system, making sure the fan is also set to OFF. Clear off the kitchen island top and sponge it clean. Wait 20 or 30 minutes for any dust to settle, while opening the kit and reviewing the steps and how the various pieces go together. I again sponge clean the area of the island where I'll be working, then just follow the installation directions.

you know, i tried my best to avoid bubbles and dust at all cost BUTTTT it was my first time applying a screen protector, and even on this huge sized tablet??? so yeah i messed up a bit, was trying too hard that i removed once & then tried to do it again. so yeah...few dusts i guess, none can see it though but ahhh those look like small fibers or idk hairs, which Only me can see (yuck looks like hairs xD) BUT THE TOOL WAS SO SO HELPFUL. NO BUBBLES EVEN SINCE THE FIRST DAY !!! BUT TOO TOO PRICY FOR JUST 1 GLASS. this is like the most expensive protector u can ever get for s9 ultra on amazon bruh...

Holds up really well. The Included alignment tray and application kit make installation without bubbles very easy. Clear and looks great, and all of the cutouts are aligned properly.